Accuracy and variability of acoustic measures of voicing onset

Five commonly used methods for determining the onset of voicing of syllable-initial stop consonants were compared. The speech and glottal activity of 16 native speakers of Cantonese with normal voice quality were investigated during the production of consonant vowel (CV) syllables in Cantonese. Syllables consisted of the initial consonants /ph/, /th/, /kh/, /p/, /t/, and /k/ followed by the vowel /a/. All syllables had a high level tone, and were all real words in Cantonese. Measurements of voicing onset were made based on the onset of periodicity in the acoustic waveform, and on spectrographic measures of the onset of a voicing bar (f0), the onset of the first formant (F1), second formant (F2), and third formant (F3). These measurements were then compared against the onset of glottal opening as determined by electroglottography. Both accuracy and variability of each measure were calculated. Results suggest that the presence of aspiration in a syllable decreased the accuracy and increased the variability of spectrogram-based measurements, but did not strongly affect measurements made from the acoustic waveform. Overall, the acoustic waveform provided the most accurate estimate of voicing onset; measurements made from the amplitude waveform were also the least variable of the five measures. These results can be explained as a consequence of differences in spectral tilt of the voicing source in breathy versus modal phonation.     

Effect of Ni doping on the phase stability and conductivity of scandia-stabilized zirconia

The effect of Ni doping on the phase stability and conductivity of scandia-stabilized zirconia (SSZ) thick film was studied. A free-standing 10SSZ thick-film (10 mol% Sc₂O₃-stabilized zirconia, ~ 10 μm thick) that was previously in contact with a Ni layer during co-firing was fabricated. The 10SSZ thick-film showed a cubic phase in contrast to the rhombohedral phase shown for a bulk 10SSZ sample. The Ni content in the SSZ thick film was ~ 1.7 mol%. The effect of Ni on the cubic phase formation was also confirmed by the similar observation of the cubic phase in the Ni-doped bulk 10SSZ sample. The observed conductivity behavior also supported the XRD observation. Ni was found to hinder the transformation of the cubic phase to the rhombohedral on cooling in 10SSZ samples after a reduction treatment.     

Bell-type inequalities and tomographic entropies of multiqudit states

Tomographic entropies of multiqudit systems are studied. A comparison of Shannon and von Neumann entropic inequalities with analogous inequalities for tomographic entropies is presented. An attempt to associate the violation of these and Bell-type inequalities of multipartite states is done within the framework of tomographic probability theory.     

Enhancements of rate capability and cyclic performance of spinel LiNi0.5Mn1.5O4 by trace Ru-doping

The rate capability and cyclic performance of the LiNi_0.5Mn_1.5O₄ under high current density have been significantly improved by doping a small amount of ruthenium (Ru). Specifically, Li_1.1Ni_0.35Ru_0.05Mn_1.5O₄ and LiNi_0.4Ru_0.05Mn_1.5O₄ synthesized by solid state reaction can respectively deliver a discharge capacity of 108 and 117 mAh g^?1 at 10 C rate between 3 and 5 V. At 10 C charge/discharge rate, Li_1.1Ni_0.35Ru_0.05Mn_1.5O₄ and LiNi_0.4Ru_0.05Mn_1.5O₄ can respectively maintain 91% and 84% of their initial capacity after 500 cycles, demonstrating that Ru-doping could be a way to enhance the electrochemical performance of spinel LiNi_0.5Mn_1.5O₄.     

Biodegradable Sodium Alginate/Carrageenan/Cellulose Composite Hydrogel Wound Dressings Containing Herbal Extracts for Promoting Blood Coagulation and Wound Healing

Accelerating the coagulation process and preventing wound infection are major challenges in the wound care process. Therefore, new multifunctional wound dressings with procoagulant, antibacterial, and antioxidant properties have enormous potential for clinical application. In this work, biodegradable hydrogels containing herbal extracts are prepared for wound dressings. First, the active ingredients are extracted from Amaranthus spinosus (A. spinosus) and Rubia cordifolia (R. cordifolia) and added to the hydrogels prepared from microcrystalline cellulose (MCC), carrageenan, and sodium alginate. Then the composite hydrogels are air-dried to obtain the wound dressings. The wound dressings prepared in this work have good biocompatibility and moisture retention. The mechanical properties of the wound dressings are further improved with the addition of MCC. Besides, the wound dressings have excellent procoagulant, antibacterial, and antioxidant properties due to the presence of R. cordifolia extract. Overall, the most effective group of wound dressings with different ingredient formulations reduces clotting time by 75% and largely inhibits bacterial growth. The wound dressings perform well in the animal wound models to promote wound healing. These results indicate that the hydrogel wound dressings prepared in this work have great potential for medical applications.     

Strategies for the construction of supramolecular assemblies from poly-NHC ligand precursors

The field of supramolecular assemblies has developed rapidly in the last few decades, thanks in a large part to their diverse applications. These assemblies have been mostly based on Werner-type coordination motifs in which metal centres are coordinated by nitrogen or oxygen donors. Recently, N-heterocyclic carbene(NHC) ligands have been employed as carbon donors not only because of their appealing structures but also due to the extensive applications in catalysis, biomedicine and material science of the resulting assemblies. During the last decade, NHC-based supramolecular assemblies have witnessed rapid growth and extensive application in molecular recognition, luminescent materials and catalysis. For different topological systems, a diverse selection of poly-NHC precursors and synthetic strategies is crucial to precisely control the synthesis of supramolecular architectures. Several synthetic strategies have been developed to synthesise two-dimensional(2D) molecular metallacycles and three-dimensional(3D) metallacages from a wide range of poly-NHC precursors, including a straightforward one-pot strategy,supramolecular transmetalation, stepwise synthesis, an improved one-pot strategy involving self-sorting behaviour of 3D metallacages and a subtle variation strategy of poly-NHC ligand precursors. This review offers a summary of the synthetic strategies applied for the construction of different poly-NHC-based supramolecular assemblies, particularly emphasizes recent progress in the synthesis of large and complex supramolecular assemblies from poly-NHC precursors, and further attention is given to their application in postsynthetic modifications(PSMs), host-guest chemistry, luminescent properties and biomedical applications.     

Expression of hepatitis C virus nonstructural 4B in transgenic mice

Hepatitis C virus (HCV) is a pathogen that is of great medical significance in chronic hepatitis, liver cirrhosis, and hepatocellular carcinoma worldwide. Although the HCV proteins have been intensively investigated over the past decade, the biochemical functions of the NS4B protein are still largely unknown. To investigate NS4B as a potential causative agent of liver disease, transgenic mice expressing the NS4B protein in liver tissue were produced. The transgenic animals were phenotypically similar to their normal littermates for up to 18 months of age. Our results suggest that the HCV NS4B protein is not directly cytopathic or oncogenic in our transgenic mice model.     

Novel Synthesis and Properties of Smart Core-Shell Microgels

A new method has been developed to prepare smart microgels that consist of well-defined temperature-sensitive cores with pH-sensitive shells. The microgels were obtained directly from aqueous graft copolymerization of N-isopropylacrylamide and N,N′-methylenebisacrylamide from water-soluble polymers containing amino groups such as poly(ethyleneimine) and chitosan. The gel diameters ranged from 300 to 400 nm with narrow size distribution. The unique core-shell nanostructures exhibited tuneable responses to pH and temperature.     

Stochastic/Controlled Symmetry Breaking of the T8‐POSS Cages toward Multifunctional Regioisomeric Nanobuilding Blocks

Precise synthesis of nanobuilding blocks with accurately positioned functional groups presents a daunting challenge. Herein, a practical synthesis and thorough characterization of a series of T₈‐polyhedral oligomeric silsesquioxane (POSS) di‐ and triadducts is reported. Upon addition of triflic acid across the double bonds in octavinylPOSS (V₈T₈) followed by hydrolysis, the cubic symmetry of the T₈‐POSS cage (O_h) is broken into C_2v (ortho‐), C_2v (meta‐), and D_3d (para‐) for diadducts and further to C_s (oom‐), C_s (omp‐), and C_3v (mmm‐) for triadducts in a stochastic fashion. Their structures and regioconfigurations have been unambiguously demonstrated by ¹H, ¹³C, and ²⁹Si NMR spectroscopy, as well as MALDI‐TOF mass spectrometry. The assignment of the diadducts was further corroborated by converting each individual diadduct into triadduct(s), the structure of which is controlled by the symmetry of the precursor. Except for the C_3v triadduct, they can all be prepared in synthetically useful quantities. The presence of two types of highly reactive and mutually orthogonal functional groups facilitates further modification into complex nanostructures and composite materials. These unique regioisomers provide a versatile platform for constructing giant molecules and Janus silsesquioxanes.