Visible upconversion and infrared luminescence investigations of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> powders doped with Er<Superscript>3+</Superscript>, Yb<Superscript>3+</Superscript> and Zn<Superscript>2+</Superscript> ions

Alumina (Al₂O₃) powders doped with Er³⁺, Yb³⁺ and Zn²⁺ ions have been prepared by a low-temperature combustion synthesis technique. The phase purity and crystalline structure of the combustion products are confirmed by powder X-ray diffraction. An efficient frequency upconversion in the visible region and the emission in the infrared (IR) region respectively corresponding to the ²H_11/2, ⁴S_3/2→⁴I_15/2, ⁴F_9/2→⁴I_15/2 and ⁴I_13/2→⁴I_15/2 transitions upon direct excitation with a CW laser lasing at ∼980 nm are discussed. The enhancement observed in the intensity of the upconversion emission bands in the visible region and the emission band in the IR region due to the presence of Yb³⁺ and Zn²⁺ in Er³⁺:Al₂O₃ powders is reported and explained in detail.     

Direct calculation of time varying Aharonov-Bohm effect

The Aharonov-Bohm effect (ABE) for steady magnetic fields is a well known phenomenon. However, if the current in the infinite solenoid that creates the magnetic field is time-dependent, that is in the presence of both magnetic and electric fields, there is no agreement whether the effect would be present. In this note, we try to investigate time varying ABE by a direct calculation in a set-up with a weak time dependent magnetic field. We find that the electric field arising out of the time-varying magnetic field in the path of the electrons does not enter the action integral but only changes the path of the electron from the source to the slits and then on to the detector. We find a frequency dependent AB phase shift. At low frequencies the result smoothly approaches the one for a constant field as the frequency tends towards zero. On the other hand, for high frequencies such that the AB-phase induced in the path of the wave packet oscillates rapidly, the net effect will be very small which is borne out by our results.     

The soft bremsstrahlung structure function

Low's theorem is used to express the soft-photon structure function in terms of the single- and double-charged particle structure functions. With the simplifying assumption that asymptotically the hadronic particles cluster (in the c.m. frame) in sharp forward and backward cones, we obtain a simple explicit form for this soft bremsstrahlung structure function. The question of scaling is discussed.     

Alpha-deuteron structure of 6Li as predicted by a separable-potential three-body model

Schroedinger's equation with separable n-p (³S₁) and $\text{n}\text{-α (}{}^2\text{P}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}\text{)}$ potentials solved to obtain a three-body model of the ⁶Li ground-state wave function. This model predicts the α-n-p binding energy of ⁶Li to be 4.67 MeV [Exp.: 4.53 MeV = 3.697 + 0.834 (Coulomb)], the asymptotic normalization constant of the d-α tail to be 2.39, and the amount of d+α component to be 65%. The ⁶Li→α+d vertex function is slightly more momentum dependent than present experiments suggest.     

An enthalpic approach to delineate the interactions of cations of imidazolium-based ionic liquids with molecular solvents

We present a systematic investigation on the enthalpic assessment of the interactions operating between the cation and anion of four imidazolium ionic liquids with aqueous and various nonaqueous solvents. Accurate experimental information gathered with the help of an isothermal titration calorimeter at 298.15 K has been analyzed for excess partial molar enthalpy of the ionic liquid, H(IL)(E), in terms of hydrophobic and solvation effects. The variations in the limiting excess partial molar enthalpy of the ionic liquid, H(IL)(E, ∞), have been correlated with solvent properties. We have quantified the enthalpic effects due to dissociation of ionic liquids in very dilute solutions and to clathrate formation with the increasing concentration of ionic liquid. A change in enthalpic behavior from endothermic to exothermic is observed on increasing the carbon chain length attached to the imidazolium ring. The solvent reorganization around the cationic species has been unraveled by employing the ionic liquid interaction parameters called as H(IL-IL)(E) deduced from the H(IL)(E) data. The apparent relative molar enthalpy, φ(L), derived from H(IL)(E) data has been examined in the light of the specific ion interaction theory as advanced by Pitzer with accurate results.     

Accurate mass measurement and tandem mass spectrometry of intact globin chains identify the low proportion variant hemoglobin Lepore-Boston-Washington from the blood of a heterozygote

Within a mixture of proteins, minor polymorphic components are difficult to identify using a conventional proteomic approach. Their identification generally requires multi-dimensional separation steps, before or after proteolytic cleavage, followed by sequence analysis of the proteolytic products. In this study, we investigated the potential of tandem mass spectrometry for protein characterization by identifying the delta-beta hybrid human hemoglobin variant Lepore-Boston-Washington using electrospray ionization tandem mass spectrometry. Hemoglobin Lepore-Boston-Washington occurs mainly in heterozygotes, where it comprises approximately 10% of the total non-alpha-chains, the dominant non-alpha-chain being the normal beta (approximately 90%). Furthermore, Hemoglobin Lepore-Boston-Washington has an average molecular mass (15,865.23 Da) that is only 2 Da lower than that of the normal beta-chain (15,867.24 Da). Consequently, it cannot be resolved from the normal beta-chain by mass spectrometry. Here we show how Hemoglobin Lepore-Boston-Washington was identified directly from the diluted blood of a heterozygote by analyzing the product ions from the Lepore-Boston-Washington and normal beta-chain ions without prior separation of the individual chains. This study shows the potential of the tandem mass spectrometry for identifying a minor component in an unseparated mixture of proteins.     

An exploration of conformational search of leucine molecule and their vibrational spectra in gas phase using ab initio methods

An extensive exploration of the conformational space has been carried out to characterize all possible gas phase structures of leucine. A total of 324 unique trial structures for canonical leucine were generated by considering all possible combinations of single bond rotamers. All trial structures were optimized at the B3LYP/6-311G* level of the DFT method. A total of 77 unique and stationary canonical conformers were found. Further, 15 most stable conformers were reoptimized at B3LYP/6-311++G** level and their respective relative energies, vertical ionization energies, hydrogen bonding patterns, rotational constants and dipole moments were calculated. A single point energy calculations for leucine conformers have also been done at both B3LYP/6-311++G(2df, p) and MP2/6-311++G(2df, p) levels. The good agreement between our estimates of rotational constants for two most stable conformers and available experimental measurements supports the reliability of the B3LYP/6-311++G** level of theory for describing the conformational behavior of leucine molecule. The proton affinity and gas phase basicity were also determined. Using the statistical approach, conformational distributions at various temperatures have also been performed and analyzed. Vibrational spectra were also calculated. It is also observed that zwitterions of leucine are not stable in gas phase.     

Thermodynamic Model for BiPO4(cr) and Bi(OH)3(am) Solubility in the Aqueous Na+–H+–\mathrm{H}_{2}\mathrm{PO}_{4}^{-}–\mathrm{HPO}_{4}^{2-}–\mathrm{PO}_{4}^{3-}–OH−–Cl−–H2O System

Prior to this study no data for the solubility product of BiPO₄(cr) or the complexation constants of Bi with phosphate were available. The solubility of BiPO₄(cr) was studied at 23±2?°C from both the over- and under-saturation directions as functions of a wide range in time (6–309 days), pH values (0–15), and phosphate concentrations (reaching as high as 1.0 mol?kg^?1). HCl or NaOH were used to obtain a range in pH values. Steady state concentrations and equilibrium were reached in <6 days. The data were interpreted using the SIT model. These extensive data provided a solubility product value for BiPO₄(cr) and an upper limit value for the formation of BiPO₄(aq). Because the aqueous system in this study involved relatively high concentrations of chloride, reliable values for the complexation constants of Bi with chloride were required to accurately interpret the solubility data. Therefore as a part of this investigation, existing Bi–Cl data were critically reviewed and used to obtain values of equilibrium constants for various Bi–Cl complexes at zero ionic strength along with the values for various SIT ion interaction parameters. Predictions based on these thermodynamic quantities agreed closely with our experimental data, the chloride concentrations of which ranged as high as 0.7 mol?kg^?1. The study showed that BiPO₄(cr) is stable at pH values <9.0. At pH values >9.0, Bi(OH)₃(am) is the solubility controlling phase. Reliable values for the Bi(OH)₃(am) solubility reactions involving Bi(OH)₃(aq) and $\mathrm{Bi}(\mathrm{OH})_{4}^{-}$ and the formation constants of these aqueous species are also reported.