Determination of cobalt in urine by gas chromatography-mass spectrometry employing nickel as an internal standard.

In addition to the electric field and pH gradient used in isoelectric focusing, a recently introduced technique, isoelectric focusing (or electrical hyperlayer) field-flow fractionation, employs the flow of the liquid carrier through a thin separation channel as a third factor affecting separation. Focusing of cytochrome c (CYTC) in a trapezoidal cross-section channel of 0.875 ml volume and 25 cm length was investigated as a function of the injection procedure, relaxation time, flow-rate of the carrier ampholyte solution and applied electric power. The influence of different initial conditions was also investigated by computer simulation. Both computed and experimental data showed an important contribution of the injection procedure and relaxation time on the retention and shape of the CYTC zone. It follows from these data that the sample should be injected as a narrow zone into the centre of the stream rather than homogeneously together with the carrier solution. For the described experimental set-up it could be demonstrated that the time necessary for zone formation should be at least 15 min and that relaxation times in excess to 20 min do not influence the final shape of the CYTC zone. It could further be shown experimentally that the sample must be injected under an applied electric field, that the relaxation time should be about 10 min, that the elution flow-rate should not be larger than 100 μl/min, that focusing becomes more efficient with increasing electric fields and that, for a given assembly and specified flow conditions, there is an electric power window only within which proper operation is possible.     

Hypervalent Iodine in the Synthesis of Bridgehead Heterocycles: A Facile Route to the Synthesis of 6‐Arylimidazo[2,1‐b]thiazoles Using [Hydroxy(tosyloxy)iodo]benzene

α‐Tosyloxyketones (2), readily accessible through hypervalent iodine oxidation of enolizable ketones (1) using [hydroxy(tosyloxy)iodo]benzene (HTIB) in acetonitrile, exclusively generates the 6‐arylimidazo[2,1‐b]thiazoles (4) on treatment with commercially available 2‐aminothiazole (3).     

Base Catalysed Condensation of Acetone with Uracil Derivatives: One Step Synthesis of Pyranopyrimidines

Condensation of uracil derivatives (1,3,4) with acetone in the presence of triethylamine gave pyranopyrimidines (2,5,6).     

Lithiation and reactions of stilbene oxides: synthetic utility

The lithiation of trans- and cis-stilbene oxides (+/-)-1 and 8 has been investigated. While with 8, lithiation occurred exclusively at the benzylic position, with the trans isomer (+/-)-1, ortho-lithiation competed with alpha-lithiation depending upon the experimental conditions. The configurational stability of the alpha-lithiated cis- and trans-stilbene oxides (+/-)-2 and (+/-)-9, respectively, was proved as well as that of scalemic stilbene oxide (R,R)-2.     

Effects of hydration and hydrophilicity on Na‐Clay‐supported aqueous‐phase catalysis for atom transfer radical polymerization

Hydrated sodium montmorillonite (Na‐clay) has been used as a catalyst support for the heterogeneous atom transfer radical polymerization of benzyl methacrylate in the presence of various concentrations of water, reducing agent, and CuBr₂ in anisole at ambient temperature. The polymerization was promoted via reduction of Cu^II to Cu^I through the addition of sodium ascorbate (NaAsc) as a reducing agent in aqueous solution. The polymerizaton proceeded in a controlled manner and produced poly(benzyl methacylate) with moderately narrow molecular weight distribution (MWD) when performed under optimum conditions of hydration (10 wt % ≤ H₂O/Na‐clay ≤ 21 wt %) and reducing agent (0.15 ≤ [NaAsc]/[I] ≤ 0.23). The polymerization was uncontrolled if hydration and NaAsc exceed above their optimum range of concentrations. Apparent rate of the polymerization (k_app) increased in the presence of decane–anisole (1/3, v/v) mixture solvent. Selective adsorption of decane at the interfaces of the hydrated clay was attributed for the rate enhancement due to increased polymer and hydrophobic interface interaction. The polymerization progressed in a controlled manner as confirmed by the first‐order time‐conversion plot, linear increase in molecular weights, and moderately narrow MWDs over conversion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Solvent Extraction of Uranium(VI), Plutonium(VI) and Americium(III) with HTTA/HPMBP Using Mono- and Bi-Functional Neutral Donors: Synergism and Thermodynamics

Synergistic extraction of hexavalent uranium and plutonium as well as trivalent americium was studied in HNO₃ with thenoyl, trifluoro-acetone (HTTA)/1-phenyl, 3-methyl, 4-benzoyl pyrazolone-5 (HPMBP) in combination with neutral donors viz, DPSO, TBP, TOPO (mono-functional) and DBDECMP, DHDECMP, CMPO (bi-functional) with wide basicity range using benzene as dileunt. A linear correlation was observed when the equilibrium constant log Ks for the organic phase synergistic reaction of both U(VI) and Pu(VI) with either of the chelating agents HTTA or HPMBP was plotted vs. the basicity (log Kh) of the donor (both mono- and bi-functional) indicating bi-functional donors also behave as mono-functional. This was supported by the thermodynamic data (G ⁰, H ⁰, S ⁰) obtained for these systems. The organic phase adduct formation reactions were identified for the above systems from the thermodynamic data. In the Am(III) HTTA system log K _s values of bi-functional donors were found to be very high and deviate from the linear plot (log K _s vs. log K _h ) obtained for mono-functional donors, indicating that they function as bi-functional for the Am(III)/HTTA system studied. This was supported by high +ve S ⁰ values obtained for this system.     

Synthesis of quinine and quinidine using sulfur ylide-mediated asymmetric epoxidation as a key step

The epoxidation of meroquinene aldehyde with a chiral sulfur ylide as the key step in the synthesis of quinine and quinidine is described. The epoxidation reactions proceed under reagent control with high selectivity and good yield. The effect of sulfide and ylide substituents on the stereochemical outcome of the reaction is discussed.     

Studies on controlled potential coulometric determination of gallium in sodium perchlorate and sodium thiocyanate

Controlled potential coulometric (CPC) studies were carried out for developing a method to determine gallium at milligram levels, in the mixed supporting electrolyte medium (4 M NaClO₄ + 0.5 M NaSCN), employing stirring mercury as a working electrode. Investigations for optimization of working electrode potentials, quantity of charge, level of background current and electrolysis time for achieving quantitative reduction of Ga(III) to Ga and its oxidation back to Ga(III), were undertaken. Effect of gallium content and interference of zinc in of gallium determination were also studied. The developed methodology was employed for the determination of gallium in pure Ga as well as in synthetic U + Ga mixture solutions. Accuracy and precision values of better than 0.5% were obtained at 1-2 mg levels.