On-line and in situ monitoring of oxygen concentration and gas temperature in a reheating furnace utilizing tunable diode-laser spectroscopy

Increased demands on energy savings and quality control in metallurgical processes have created incentives for new methods to monitor and control the process. In this paper we will present a field trial that shows the potential of tunable diode-laser spectroscopy (TDLS) for simultaneous contact free measuring and monitoring of the oxygen concentration as well as the gas temperature in a reheating furnace during production. The field trials were carried out at an oil-fueled reheating furnace during 7 weeks of production. The tunable diode-laser spectrometer was measuring in situ across the preheating zone and the soaking zone in the furnace. During the campaign the oxygen concentration and the gas temperature in the furnace environment were simultaneously monitored and instantaneous variations in these parameters could easily be recorded and subsequently correlated to actual changes in the process. Furthermore, the much shorter response-time of the TDLS technique compared with conventional measurement methods such as thermocouples and extractive gas analyzers was also demonstrated during the trials. The results show the potential for the TDLS technique to be used for energy savings as well as product quality improvements by controlling the burners in the reheating furnace. The results show that it would be possible to control and optimize the oxygen concentration with TDLS in the control loop of the reheating furnace.     

Nucleophilic catalysis of halide displacement from brominated poly(isobutylene-co-isoprene)

The dynamics of halide displacement from brominated poly(isobutylene-co-isoprene)(BIIR) by carboxylate nucleophiles are detailed and discussed in terms of a general reaction mechanism. The exomethylene allylic bromide isomer within BIIR is shown to undergo simultaneous S_N2 alkylation of Bu₄Nacetate and S_N2′ rearrangement with Bu₄NBr. The latter generates a Z-BrMe isomer that is more reactive toward esterification. Hence, overall polymer modification rates are auto-accelerating, as Bu₄NBr liberated by esterification catalyzes allylic bromide rearrangement to a more reactive electrophile. This knowledge of reaction mechanisms is used to develop nucleophilic catalysis techniques involving iodide intermediates.     

Molecular imaging of lipids in cells and tissues

The distribution pattern of lipid species in biological tissues was analyzed with imaging mass spectrometry (TOF-SIMS; time-of-flight secondary ion mass spectrometry). The first application shows distribution of a glycosphingolipid, the galactosylceramide-sulfate (sulfatide) with different hydrocarbon chain lengths and the fatty acids palmitate and oleate in rat cerebellum. Sulfatides were seen localized in regions suggested as paranodal areas of rat cerebellar white matter as well as in the granular layer, with highest concentrations at the borders of the white matter. Different distribution patterns could be shown for the fatty acid C16:0 palmitate and C18:1 oleate in rat cerebellum, which seem to origin partly from the hydrocarbon chains of phosphatidylcholine. Results were shown for two different tissue preparation methods, which were plunge-freezing and cryostat sectioning as well as high-pressure freezing, freeze-fracturing and freeze-drying.The second application shows TOF-SIMS analysis on a biological trial of choleratoxin treatment in mouse intestine. The effect of cholera toxin on lipids in the intestinal epithelium was shown by comparing control and cholera toxin treated mouse intestine samples. A significant increase of the cholesterol concentration was seen after treatment. Cholesterol was mainly localized to the brush border of enterocytes of the intestinal villi, which could be explained by the presence of cholesterol-rich lipid rafts present on the microvilli or by relations to cholesterol uptake. After cholera toxin exposure, cholesterol was seen increased in the nuclei of enterocytes and apparently in the interstitium of the villi.We find that imaging TOF-SIMS is a powerful tool for studies of lipid distributions in cells and tissues, enabling the elucidation of their role in cell function and biology.     

A Search for Quantitative Acylation of α-Trinositol (1d-myo-Inositol 1,2,6-tris(dihydrogen phosphate) Pentasodium Salt)

Abstract

The acylation of α-trinositol is very sensitive to reaction conditions. Competing condensation reactions may give pyrophosphates and cyclic phosphates. Treatment of a tert-ammonium salt corresponding to α-trinositol with carboxylic acid anhydride and DMAP gives a good yield of the expected esters.     

TOF-SIMS analysis of the interface between bone and titanium implants—Effect of porosity and magnesium coating

Implant healing was studied with regard to the mineralization of the implant-tissue interface. Titanium discs were surface-modified and implanted in rat tibia for 4 weeks. After implantation, the bone was embedded in resin and cross sections of bone and implant were made using a low speed saw equipped with a diamond wafering blade. The sections were analyzed with imaging TOF-SIMS using a Bi₃⁺ cluster ion source. This ion source has recently been shown to enable identification of hydroxyapatite (HA) fragments in bone samples. The area within 40 μm from the implant surface was selected for analysis, corresponding to bone-implant interface, from which positive spectra were recorded. In conclusion, differences were observed between the implants tested regarding signal intensity of fragments specific for HA. Coating of the implants with magnesium and porosity were shown to influence the mineral content of the bone-implant interface. This technique might be useful for biocompatibility assessment and for studying the mineralization process at implant surfaces.     

Analysis of bone minerals by time-of-flight secondary ion mass spectrometry: a comparative study using monoatomic and cluster ions sources

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) is an important tool for the analysis of bone minerals at implant surfaces. Most studies have been performed with monoatomic primary ion sources such as Ga(+) with poor secondary molecular ion production efficiency and only elemental distributions and minor fragments of bone minerals have been reported. By using cluster ion sources, such as Au(1-3) (+) and Bi(1-3) (+), identification of larger hydroxyapatite species at m/z 485, 541, 597 and 653, identified as Ca(5)P(3)O(12), Ca(6)P(3)O(13), Ca(7)P(3)O(14) and Ca(8)P(3)O(15), respectively, became possible. The ions appear to be fragments of the hydroxyapatite unit cell Ca(10)(PO(4))(6)(OH)(2). Each ion in the series is separated by 55.9 m/z units, corresponding to CaO, and this separation might reflect the columnar nature of the unit cell.     

Molecular distribution of some commercial nonylphenol ethoxylates using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Nonylphenol ethoxylates (NPEs) belong to a group of nonionic surfactants that are collectively referred to as alkylphenol ethoxylates (APEs). APEs find widespread use in heavy-duty commercial and household cleaning formulations, shampoos, and industrial processing, i.e. textile manufacture. Their environmental impact depends on the molecular distribution and the extent of their biodegradation in municipal sewage systems, waterways and rivers. We have established two sample preparation methods that have enabled the determination of the molecular distributions of six commercial nonylphenol ethoxylates using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS). In both methods, alpha-cyano-4-hydroxycinnamic acid, dissolved in acetonitrile/tetrahydrofuran, was used as the matrix. In one set of experiments, the NPEs were dissolved in an acetonitrile/tetrahydrofuran solvent system prior to mixing with the matrix solution, and the resulting MALDI-TOF mass spectra produced mostly sodiated molecules [M + Na](+). The NPEs, all having the formula 4-(C(9)H(19))-C(6)H(4)-(OCH(2)CH(2))(n)-OH, are Surfonic (R)N-95, N-100, N-102, N-120, N-150 and N-300. Surfonic N-95 and N-100 gave n values of 5-20; Surfonic N-102, N-120, N-150, and N-300 gave n values of 5-21, 5-22, 8-25 and 15-40, respectively. In order to develop a sample preparation method that could be used with less polar NPEs, we dissolved the NPEs (except N-300) in pentane prior to mixing with the matrix solution, and found that the MALDI spectral quality was unaffected by the solvent systems. Copyright 1999 John Wiley & Sons, Ltd.     

The effect of an electric field on the local stoichiometry of front waves in an ionic chemical system

A model based on an autocatalytic, two-step reaction mechanismincluding two ionic components (of the same charge) and twonon-ionic components, where both reactions are of second orderoverall, is considered when an electric field is applied tothe system. The model is motivated by experimental observationson the iodate-arsenous acid system. The travelling wave equationsare examined first and conditions obtained for the existenceand form of these waves. These conditions are then used to interpretthe results obtained from numerical simulations of the fullsystem. These results display all the main features observedexperimentally, the change in the local stoichiometry and thepossible wave annihilation for sufficiently strong fields. Themodel provides a clear explanation for these features as wellas predicting new features not reported from the experiments.The main one of which is the occurrence of an internal wavepropagating in the reacted part of the system in the directioninduced by the applied field.