A smart gelator as a chemosensor: application to integrated logic gates in solution, gel, and film

A gelator that consisted of one benzimidazole moiety and four amide units was used as a chemosensor. We found that its absorption and emission spectra in solution were sensitive to two complementary chemical stimuli: protons and anions. Thus, YES and INH logic gates were obtained when absorbance was defined as an output. A combination gate of XNOR and AND with an emission output was also obtained. Moreover, wet gels in two solvents were used to construct two more-complicated three-input-three-output gates, owing to the existence of the gel phase as an additional output. Finally, in xerogel films that were formed from two kinds of wet gels, reversible changes in their emission spectra were observed when they were sequentially exposed to volatile acid and NH(3). Another combination two-output logic gate was obtained for xerogel films. Finally, three states of the gelator were used to construct not only basic logic gate, but also some combination gates because of their response to multiple chemical stimuli and their multiple output signals, in which one chemical input could erase the effect of another chemical input.     

An efficient novel synthesis of beta-(azuleno[1,2-b]benzothienyl)- and beta-(azuleno[2,1-b]benzothienyl)-alpha,beta-unsaturated ketones by the tropylium ion-mediated intramolecular furan ring-opening reaction and X-ray investigation of methyl ketone derivative

Intramolecular reaction of 2-tropylio-3-(5-substituted 2-furyl)benzothiophenes (3), prepared from the corresponding 2-cycloheptatrienyl-3-(5-substituted 2-furyl)benzothiophenes (2), afforded the beta-(azuleno[1,2-b]benzothienyl)-alpha,beta-unsaturated ketones (4), which are otherwise difficult to obtain, in moderate yields. The reaction involves a ring-opening process of the furan ring by intramolecular attack of the tropylium ion onto the 2-position of the furan ring. Similarly, beta-(azuleno[2,1-b]benzothienyl)-alpha,beta-unsaturated ketones (8) were obtained from the corresponding 3-tropylio-2-(5-substituted 2-furyl)benzothiophenes (7) albeit in lower yields. The molecular and crystal structures of the methyl ketone derivative, 8a, are discussed on the basis of X-ray structure analysis.     

Cyclopropanation and carbonyl olefination utilizing 2-(Alk-1-yn-1-yl)-2-(trialkylsilyl)-1,3-dithianes via regioselective generation of titanium alkynylcarbene complexes

Cp(2)Ti[P(OEt)(3)](2)-promoted reactions of 2-(alk-1-yn-1-yl)-2-(trialkylsilyl)-1,3-dithianes (RS)(2)C(Si)CCR with terminal olefins and carbonyl compounds produced (trialkylsilylethynyl)cyclopropanes and 1-(trialkylsilyl)alk-3-en-1-ynes, respectively. These compounds were suggest to be produced via the formation of intermediary titanium alpha-(trialkylsilylethynyl)carbene complexes Cp(2)Ti=C(R)CCSi in preference to their regioisomers, alpha-(trialkylsilyl)alkynylcarbene complexes Cp(2)Ti=C(Si)CCR.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone

A simple method has been described for the Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone (SBPBH). In aqueous solution, cobalt(II) reacts with SBPBH to form a yellow complex, which is not destroyed even by the addition of 3.8 M perchloric acid. The absorption maximum of the complex in 1.5 M perchloric acid medium was found to be 400 nm; the molar absorptivity was 2.17 × 10⁴ liters mol⁻¹ cm⁻¹. The proposed method is fairly selective and has been applied to the determination of cobalt in standard alloy steel samples.     

The annealing behavior of hydrogen implanted into Al-1.5 at.% Si alloy

We have studied effects of added elements as well as defects on trap-sites of hydrogen in metals. For the purpose, we observed depth profiles and thermal behaviors of hydrogen implanted into Al-1.5 at.% Si alloy samples in an implantation-temperature range of liquid nitrogen temperature (LNT) to 373 K at different doses. The results were compared with those for pure aluminum samples. It was found that hydrogen is trapped as molecules in grain boundaries of Al/Si.     

Aplyronines D–H from the sea hare Aplysia kurodai: isolation,structures, and cytotoxicity

Five cytotoxic macrolides, aplyronines D–H (4–8), were isolated from the Japanese sea hare Aplysia kurodai. They are new congeners of the antitumor compound aplyronine A (1), which was previously isolated from the same organism. Their structures were determined by spectroscopic analysis (NMR and MS). The cytotoxicity of these new compounds was evaluated in comparison with that of aplyronines A–C (1–3), suggesting the importance of the 7-O-seryl ester group for mediating the potent cytotoxicity of aplyronines.     

Hydrazine (N2H4) adsorption on Ni(1 0 0) – Density functional theory investigation

A theoretical study on the structure and adsorption mechanism of hydrazine (N₂H₄) on Ni(1 0 0) are presented. The hydrazine molecule was found to adsorb on the surface through one of its nitrogen atom in its anti-conformation. The charge transfer from hydrazine lone pair orbitals played a key role in the formation of the bonding. The mechanism involved in the bonding was found to reduce the necessity of hyper-conjugation interaction, that reduces the gauche effect found in hydrazine at the gas-phase. Upon adsorption to the surface, the reduced interaction resulted in the promotion of a more favored conformation through its anti-conformation.     

Magnetic properties of La-Co substituted M-type strontium hexaferrites prepared by polymerizable complex method

Magnetic properties of La-Co substituted M-type strontium hexaferrites were studied. The samples were prepared by polymerizable complex method. Crystal structure of samples has been investigated by powder X-ray diffraction (XRD). Single-phase M-type strontium hexaferrites with chemical composition of Sr_1.05−xLa_xFe_12−xCo_xO₁₉ (x=0-0.4) were formed by heating at 1173 K for 24 h in air. Magnetic properties were discussed by measurements of M-H curves with vibrating sample magnetometer (VSM). La-Co substituted M-type strontium hexaferrites prepared by polymerizable complex method showed typical magnetic hysteresis of hard ferrite. The coercive force increased significantly by La-Co substitution with polymerizable complex method. Maximum coercive force achieved in this study is 8.0 kOe (640 kA/m). Scanning electron microscopy revealed that the prepared ferrite particles have plate-like shape of diameter range between 20 and 500 nm.     

Effect of Alkynyl Group on Reactivity in Photoaffinity Labeling with 2-Thienyl-Substituted α-Ketoamide

Minimalist photo-reactive probes, which consist of a photo-reactive group and a tag for detection of target proteins, are useful tools in chemical biology. Although several diazirine-based and aryl azide-based minimalist probes are available, no keto-based minimalist probe has yet been reported. Here we describe minimalist probes based on a 2-thienyl-substituted α-ketoamide bearing an alkyne group on the thiophene ring. The 3-alkyne probe showed the highest photo-affinity labeling efficiency.