Studies on steroids. CCXXXXV. Determination of 5 beta-cholestanoic acids in human urine by gas chromatography-mass spectrometry with negative ion chemical ionization detection

A method for the determination of 3 alpha,7 alpha-dihydroxy-5 beta-cholestanoic acid (DHCA) and 3 alpha,7 alpha,12 alpha-trihydroxy-5 beta-cholestanoic acid (THCA) in human urine by gas chromatography (GC) in combination with negative ion chemical ionization (NICI) mass spectrometry is described. Unconjugated, glycine- and taurine-conjugated DHCA and THCA labelled with 18O and 2H were used as internal standards. 5 beta-Cholestanoic acids in urine were extracted with a Sep-Pak C18 cartridge, separated into the unconjugated, glycine- and taurine-conjugated fractions by ion-exchange chromatography on piperidinohydroxypropyl Sephadex LH-20 and, following alkaline hydrolysis of conjugated forms, derivatization into the pentafluorobenzyl ester-dimethylethylsilyl ethers. Subsequent resolution of each fraction into DHCA and THCA was attained by GC on a cross-linked 5% phenylmethylsilicone fused-silica capillary column where 5 beta-cholestanoic acids were monitored with a characteristic carboxylate anion [M-181]- in the NICI mode using isobutane as a reagent gas. The method was applied to separation and determination of 5 beta-cholestanoic acids in urine from a patient with Zellweger syndrome and from healthy volunteers.     

Effect of various halide salts on the incompatibility of cyanocobalamin and ascorbic acid in aqueous solution

Combination of cyanocobalamin (VB12) and ascorbic acid (VC) has been widely seen in pharmaceutical products and dietary supplements. However, VB12 has been reported that its behavior in stability in aqueous solution is quite different when VC is mixed. In the present study, we examined the stabilities of these vitamins in acetate buffer (pH 4.8) using high performance liquid chromatography. Degradation of VB12 was not observed in the absence of VC in the buffer. However, when VC was mixed in the VB12 solution, VB12 concentrations decreased in accordance with VC degradation. VB12 and VC degradations were inhibited by adding sodium halides to acetate buffer at pH 4.8. These stabilization effects were also observed in the range from pH 3.5 to 5.3 and by adding potassium, magnesium, and calcium halides. Furthermore, our data demonstrated that increases in the halide anion concentrations and atomic number (Cl-相似文献   

Heterogeneous strong base catalysis in supercritical carbon dioxide by mesoporous alumina and sulfated mesoporous alumina

The development of solid strong base catalysts utilizable in green but acidic medium of scCO₂ is reviewed. The strong base sites on mesoporous alumina and sulfated mesoporous alumina that had been generated by severe treatment at 773 K under vacuum (10^?4 Torr) were not neutralized by the compressed Lewis acidic molecules of CO₂, promoting a representative strong base-catalyzed reaction of the Tishchenko reaction as well as a typical base-catalyzed reaction of the Knoevenagel reaction in scCO₂. Infrared spectroscopy of the adsorbed pyrrole, temperature-programmed desorption of CO₂, and the poisoning by a very weak Brönsted acid of methanol have revealed that the average strengths of the base sites on mesoporous alumina and sulfated mesoporous alumina are weaker than that on conventional γ-alumina like JRC-ALO-4, but that they have a small number of strong base sites which function even in scCO₂ medium. It was found that the addition of a slight amount of THF cosolvent into scCO₂ remarkably accelerates the Tishchenko reaction over sulfated mesoporous alumina; the reaction rate in the scCO₂–THF medium was 1.5-fold and 2-fold faster than those in ordinary organic solvents such as benzene and THF and that in pure scCO₂, respectively. The unique structures of mesoporous alumina and sulfated mesoporous alumina have been fully characterized by N₂ adsorption–desorption measurements and XRD analyses.     

Cover Picture

The cover picture shows a section of the electron charge density of the first metal carbide endohedral metallofullerene (Sc(2)C(2))@C(84) obtained from a synchrotron X-ray powder diffraction study by the maximum entropy method (MEM). The several density maxima, which correspond to scandium and carbon atoms, are clearly seen inside the C(84) carbon cage. The MEM charge density distribution also reveals that the C(84) cage has D(2d) symmetry (no. 23) and that the C(2) axis is parallel to the <100> face-centered cubic (fcc) direction of the unit cell. As a consequence of the site symmetry being 4mm, the C(2) axis of (Sc(2)C(2))@C(84) is oriented to six equivalent <100> directions and shows a merohedral disorder. The resultant Sc small middle dot small middle dot small middle dotSc distances and C-C bond lengths of the Sc(2)C(2) cluster are 0.429(2) and 0.142(6) nm, respectively. The observed C-C bond length is between that of a typical single and a double bond, and is very close to that of the C-C bond (0.143 nm) combining two pentagons in a C(60) molecule. More about this fascinating structure can be found in the contribution by Shinohara and co-workers on p. 397 ff.     

Photocrosslinking of poly(2,3-epithiopropyl methacrylate) by the oxidation of pendant episulfide groups

In the photocrosslinking of poly(2,3-epithiopropyl methacrylate) (PETMA) films the effect of the pendant episulfide group's oxidation on the crosslinking of PETMA was investigated. Thermal crosslinking of PETMA is promoted by peroxides such as benzoyl peroxide and hydrogen peroxide. IR spectrum of the crosslinked PETMA showed that the reaction proceeded through the oxidation of episulfide groups by the peroxides. The anthracene (An) sensitized photocrosslinking of PETMA films also proceeded via the oxidation of episulfide groups by singlet oxygen. It was found that residual tetrahydrofuran (THF) in the films remarkably increased the rate of the photocrosslinking and/or reduced the induction period. From the further investigation concerning casting solvents it was found that residual CS₂, CCl₄, and CHCl₃ in films increased the rate of the photocrosslinking and/or reduced the induction period of the photocrosslinking. The disappearance rate of An in the films was also increased by the presence of residual CS₂, CCl₄, and CHCl₃, differring from the result of THF. These results were explained by a difference in lifetime of singlet oxygen in the films. From the results were explained by a difference in lifetime of singlet oxygen in the films. From the results concerning the effects of hydroperoxides such as THF hydroperoxide and t-butyl hydroperoxide on the photocrosslinking of PETMA films the acceleration effect of the residual THF was deduced to be due to the promotion of singlet oxygen-oxidation of sulfide groups by protic compounds such as THF hydroperoxide and H₂O in the THF.     

Manipulating the Through‐Space Spin–Spin Interaction of Organic Radicals in the Confined Cavity of a Self‐Assembled Cage

We show a new approach to manipulating the through‐space spin–spin interaction by utilizing the confined cavity of a self‐assembled M₆L₄ coordination cage. The coordination cage readily encapsulates stable organic radicals in solution, which brings the spin centers of the radicals closer to each other. In sharp contrast to the fact that the radical in solution in the absence of the cage is in a doublet state, in the presence of the cage through‐space spin–spin interaction is induced through cage‐encapsulation effects in solution as well as in the solid state, resulting in the triplet state of the complex. These results were confirmed by ESR spectroscopy and X‐ray crystallography. The quantity of triplet species generated by encapsulation in the cage increases with increasing affinity of the radicals to the cage. We estimated the affinity between several types of guests and the cage in solution by cyclic voltammetry. We also demonstrate that the through‐space interaction of organic radicals within the self‐assembled coordination cage can be controlled by external stimuli such as heat or pH.     

Unprecedented double nucleophilic addition of a hydride at a central carbon of an eta3-allyl ligand

Treatment of eta(3)-allyl compound [Cp(2)Mo(eta(3)-C(3)H(5))](+)(1; Cp =eta(5)-C(5)H(5)) with MH (M = Li, Na) resulted in reduction of the allyl ligand to give propane. Deuterium-labeling studies were used to trace the origins and fates of the hydrogen atoms. The mechanism is discussed in light of the HSAB principle. The studies showed that the formation of propane can be explained by 1,2-hydrogen migration from the central to the terminal carbon of the allyl ligand, and the subsequent double nucleophilic addition of the hydride at the central carbon.     

Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid)

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.     

Broad spectrum and mode of action of an antibiotic produced byScytonema sp. TISTR 8208 in a seaweed-type bioreactor

A photobioreactor was constructed using anchored polyurethane foam strips (1 x 1 x 40 cm) fixed onto a stainless-steel ring to prevent flotation, as a biomass support material (BSM). This type of reactor was named a seaweed-type bioreactor. A filamentous cyanobacterium, Scytonema sp. TISTR 8208, which produces a novel cyclic dodecapeptide antibiotic, was immobilized in seaweed-type photobioreactor and cultivated with air containing 5% CO₂ sparged at a gas flow rate of 250 mL/min under illumination at a light intensity of 200 μmol photon m^-2s^-1. The antibiotic produced in the seaweed-type photobioreactor was purified by HPLC and examined regarding its spectrum and mode of action. The antibiotic effectively inhibited the growth of Gram-positive bacteria, pathogenic yeasts, and filamentous fungi, but it had only a weak effect on Gram-negative bacteria. Scanning electron micrograph analysis showed that the most characteristic change was swelling of the cells after exposure to the antibiotic. The antibiotic seems to alter the conformation of the microbial cell membrane, thereby changing its permeability, leading to osmotic shock.     

Cross-coupling of alkenyl,aryl or allylic selenides and grignard reagents catalyzed by nickel-phosphine complexes

Alkenyl, aryl or allylic selenides smoothly couple with Grignard reagents in the presence of Ni(II)-phosphine complexes as catalysts to afford the corresponding unsaturated compounds in good yields. The reactivity order of coupling reaction with BuMgBr catalyzed by NiCl₂ [Ph₂PCH₂CH₂CH₂PPh₂] was found to be PhSeMe « PhCl > PhSMe by the competitive reactions.