Dielectric Properties of Colossal-Dielectric-Constant Na1/2La1/2Cu3Ti4O12 Ceramics Prepared by Spark Plasma Sintering

In the current study, we report on the dielectric behavior of colossal-dielectric-constant Na_1/2La_1/2Cu₃Ti₄O₁₂ (NLCTO) ceramics prepared by mechanochemical synthesis and spark plasma sintering (SPS) at 850 °C, 900 °C, and 925 °C for 10 min. X-ray powder diffraction analysis showed that all the ceramics have a cubic phase. Scanning electron microscope observations revealed an increase in the average grain size from 175 to 300 nm with an increase in the sintering temperature. SPS NLCTO ceramics showed a room-temperature colossal dielectric constant (>10³) and a comparatively high dielectric loss (>0.1) over most of the studied frequency range (1 Hz–40 MHz). Two relaxation peaks were observed in the spectra of the electrical modulus and attributed to the response of grain and grain boundary. According to the Nyquist plots of complex impedance, the SPS NLCTO ceramics have semiconductor grains surrounded by electrically resistive grain boundaries. The colossal dielectric constant of SPS NLCTO ceramics was attributed to the internal barrier layer capacitance (IBLC) effect. The high dielectric loss is thought to be due to the low resistivity of the grain boundary of SPS NLCTO.     

New Layered Double Hydroxide, Zn–Ti LDH : Preparation and Intercalation Reactions

The layered double hydroxide (LDH) well known for its abilityto intercalate anionic compounds has been prepared conventionallyonly with bivalent and trivalent cations. In this study, Zn–Ti LDH consisting of bivalent and tetravalent cations was prepared, andreacted with organic monocarboxylic, dicarboxylic and aromatic acidsat high or room temperature. XRD patterns of the prepared LDH(Zn–Ti-CO₃) showed that interlayer spacing of the LDH was 0.67 nm. The value was small compared to the usual LDH (Zn–Al–CO₃)of 0.76 nm in the case of carbonate anion as the guest. Also, DTA,TG and DTG analysis indicated that the electrostatic force betweenthe layers and carbonate anions increased where the carbonate anionsin Zn–Ti LDH decomposed at 255 °C while those inZn–Al–CO₃ decomposed at 230–240 °C.     

Synthesis and characterization of water-soluble palladium(II)-functionalized diphosphine complexes

Water-soluble functionalized bis(phosphine) ligands L (a–h) of the general formula CH₂(CH₂PR₂)₂, where for a: R = (CH₂)₆OH; b–g: R = (CH₂)_nP(O)(OEt)₂, n = 2–6 and n = 8; h: R = (CH₂)₃NH₂ ( Scheme 1), have been prepared photochemically by hydrophosphination of the corresponding 1-alkenes with H₂P(CH₂)₃PH₂. Water-soluble palladium complexes cis-[Pd(L)(OAc)₂] (1–8) were obtained by the reaction of Pd(OAc)₂ with the ligands a–h in a 1:1 mixture of dichloromethane:acetonitrile. The water-soluble phosphine ligands and their palladium complexes were characterized by IR, ¹H and ³¹P NMR. A crystallographic study of complex 1 shows that the Pd(II) ion has a square planar coordination sphere in which the acetate ligands and the diphosphine ligand deviate by less than 0.12 Å from ideal planar.     

Quantitative analysis of two-dimensional gel-separated proteins using isotopically marked alkylating agents and matrix-assisted laser desorption/ionization mass spectrometry

We describe a simple approach for the relative quantification of individual proteins within a mixture. The method is based on the differential labelling of the mixtures by use of a commercially available acrylamide and deuterium-labelled [2,3,3'-d(3)]-acrylamide to alkylate proteins prior to two-dimensional (2-D) gel electrophoresis. The tryptic digests of the separated proteins were subjected to reflector matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) analysis and the relative peak heights of cysteine-containing peptides were used to quantify their precursor proteins. This approach was tested for the relative quantification of proteins within an artificial mixture of standard proteins and for proteins observed in a 2-D map of rat serum. A good correlation was found between the measured ratios derived from MALDI-TOF data and those theoretically calculated prior to 2-D analysis via known mixing ratios of the two alkylating reagents. The described procedure has proved to be effective for comparative measurements of protein abundances within the investigated mixtures.     

Substituted thiazolamide coupled to a redox delivery system: a new gamma-secretase inhibitor with enhanced pharmacokinetic profile

Inhibition of gamma-secretase, one of the enzymes responsible for the cleavage of the amyloid precursor protein (APP) to produce pathogenic A beta peptides, is an attractive approach for the treatment of Alzheimer's disease. We have designed a new gamma-secretase thiazolamide inhibitor bearing a dihydronicotinoyl moiety as Redox Delivery System which allows specific delivery of the drug to the brain. Through, on the one hand, A beta peptide production measurements by specific in vitro assays (gamma-secretase Cell Free assay and Cell Based assay on HEK 293 APP transfected cells) and, on the other hand, pharmacokinetic studies on animal models, the new inhibitor shows a good pharmacokinetic profile as well as a potent gamma-secretase inhibitory activity in vitro. From the obtained results, it is expected that drug will be mainly delivered to the CNS with low diffusion in the peripheral tissues. Consequently the side effects of this gamma-secretase inhibitor on the immune cells could be reduced.     

On the homotopy type of (<Emphasis Type="Italic">n</Emphasis>-1)-connected (3<Emphasis Type="Italic">n</Emphasis>+1)-dimensional free chain Lie algebra

Let R be a subring ring of Q. We reserve the symbol p for the least prime which is not a unit in R; if R ?Q, then p=∞. Denote by DGL _n ^np , n≥1, the category of (n-1)-connected np-dimensional differential graded free Lie algebras over R. In [1] D. Anick has shown that there is a reasonable concept of homotopy in the category DGL _n ^np . In this work we intend to answer the following two questions: Given an object (L(V), ?) in DGL _n ³ⁿ⁺² and denote by S(L(V), ?) the class of objects homotopy equivalent to (L(V), ?). How we can characterize a free dgl to belong to S(L(V), ?)? Fix an object (L(V), ?) in DGL _n ³ⁿ⁺² . How many homotopy equivalence classes of objects (L(W), δ) in DGL _n ³ⁿ⁺² such that H _* (W, d′)?H _* (V, d) are there? Note that DGL _n ³ⁿ⁺² is a subcategory of DGL _n ^np when p>3. Our tool to address this problem is the exact sequence of Whitehead associated with a free dgl.     

Analysis of high-reflectivity metal-dielectric mirrors for edge-emitting lasers

A metal-dielectric mirror is shown as a simple solution for high-reflectivity coatings on cleaved-facet edge-emitting lasers, as well as a means to provide wavelength stabilization and spectral filtering. We show, through the use of a simple SiO2/Ti/Au coating, reflectivities better than 90% and a 25% reduction in the 30-dB linewidth of the output spectrum. Wavelength filtering and varying reflectivities are described as the result of multiple reflections and a coupled-cavity effect.