Analysis of Suzuki, Shanker, and Kumar formulations under strong compressions

A critical analysis of the Suzuki, Shanker, and Kumar formulations is presented by studying different classes of materials under high pressure. A similar trend for all the materials studied in the present work, demonstrates that Suzuki formulation is not capable to yield compression behaviour of solids. The Shanker formulation improves the results obtained by the Suzuki formulation in small compression range (0.9<V/V₀<1). For further compressions Shanker formulation also fails. On the other hand, the Kumar formulation is found to work well for the entire range of pressure. The reasons for the failure of Suzuki and Shanker formulations are discussed.     

Electrochemical characterization of poly(vinylidenefluoride)-zinc triflate gel polymer electrolyte and its application in solid-state zinc batteries

Gel polymer electrolyte (GPE) films comprising of poly(vinylidenefluoride), propylene carbonate, ethylene carbonate and zinc trifluoromethane sulfonate are prepared and characterized. The composition of GPE is optimized to contain minimum liquid components with a maximum specific conductivity of 3.94×10⁻³ S cm⁻¹ at (25±1) °C. A detailed investigation on the properties such as ionic conductivity, transport number, electrochemical stability window, reversibility of Zn/Zn²⁺ couple and Zn/gel electrolyte interfacial stability have been carried out. The ionic conductivity follows a VTF behaviour with an activation energy of about 0.0014 eV. Cationic transport number varies from 0.51 at 25 °C to 0.18 at 70 °C. Several cells have been assembled with GPE as the electrolyte, zinc as the anode, γ-MnO₂ as the cathode and their charge–discharge behaviour followed. Capacity values of 105, 82, 64 and 37 mAh/g of MnO₂ have been achieved at 10, 50, 100 and 200 μA/cm² discharge current densities, respectively. The discharge capacity values are almost constant for about 55 cycles for all values of current densities. Cyclic voltammetric study of MnO₂ electrode in Zn/GPE/MnO₂ cell clearly shows intercalation/deintercalation of Zn²⁺.     

Some inhomogeneous magnetized viscous-fluid cosmological models with varyingΛ

Some cylindrically symmetric inhomogeneous viscous-fluid cosmological models with electromagnetic field are obtained. To get a solution a supplementary condition between metric potentials is used. The viscosity coefficient of bulk viscous fluid is assumed to be a power function of mass density. Without assuming anyad hoc law, we obtain a cosmological constant as a decreasing function of time. The behaviour of the electromagnetic field tensor together with some physical aspects of the model are also discussed.     

Direct and inverse estimates for a new family of linear positive operators

In the present paper we introduce a new family of linear positive operators and study some direct and inverse results in simultaneous approximation.     

An efficient palladium catalyzed synthesis of 2-arylbenzothiazoles

A novel and convergent palladium catalyzed synthesis of 2-arylbenzothiazoles has been investigated. The key step in the synthesis is a Suzuki biaryl coupling of 2-bromobenzothiazole with aryl boronic acids to provide a variety of 2-arylbenzothiazole derivatives in good yield. The synthetic utility of this methodology is demonstrated by the synthesis of 2-(4-aminophenyl)-6-methoxybenzothiazole, a PET probe precursor for the in vivo imaging of Alzheimer's disease.     

Wavelength-scanning Talbot effect and its application for arbitrary three-dimensional step-height measurement

We demonstrate the phenomenon of Talbot self-image plane shift by tuning the wavelength of the broadband light source. A superluminescent diode (SLD) is used as a broad-band light source and an acousto-optic tunable filter (AOTF) as wavelength-scanning device. A periodic grating is illuminated by the wavelength tuned light of SLD using AOTF and Talbot self-image plane is shifted continuously in the longitudinal direction without mechanically moving the grating. The wavelength-scanning Talbot effect is then implemented for the measurement of arbitrary step-height of discontinuous objects with extended range. The main advantages of the proposed system are non-mechanical scanning, high stability because of it’s common-path geometry and compactness. Since the measurement of the phase is not required the system is free from phase ambiguity problem and therefore, the range of measurement is large as compare to interferometric techniques.     

A rapid and sensitive extractive spectrophotometric determination of copper(II) in pharmaceutical and environmental samples using benzildithiosemicarbazone.

Benzildithiosemicarbazone (BDTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of copper(II). BDTSC reacts with copper(II) in the pH range 1.0-7.0 to form a yellowish complex. Beer's law is obeyed in the concentration range 0.5-0.4 microg cm(-3). The yellowish Cu(II)-BDTSC complex in chloroform shows a maximum absorbance at 380 nm, with molar absorptivity and Sandell's sensitivity values of 1.63 x 10(4) dm3 mol(-1) cm(-1) and 0.00389 microg cm(-2), respectively. A repetition of the method is checked by finding the relative standard deviation (RSD) (n = 10), which is 0.6%. The composition of the Cu(II)-BDTSC complex is established as 1:1 by slope analysis, molar ratio and Asmus' methods. An excellent linearity with a correlation coefficient value of 0.98 is obtained for the Cu(II)-BDTSC complex. The instability constant of the complex calculated from Edmond and Birnbaum's method is 7.70 x 10(-4) and that of Asmus' method is 7.66 x 10(-4), at room temperature. The method is successfully employed for the determination copper(II) in pharmaceutical and environmental samples. The reliability of the method is assured by analyzing the standard alloys (BCS 5g, 10g, 19e, 78, 32a, 207 and 179) and by inter-comparison of experimental values, using an atomic absorption spectrometer.     

Diastereoselective formation of 2-aryl-3-arenesulfonyl 4-ethyl-1,3-oxazolidines: An X-ray crystallographic and H NMR study

N-Arylsulfonamides of (R)- and (S)-2-amino-1-butanol, on condensation with aromatic aldehydes produced diastereomerically pure 2-aryl-3-arenesulfonyl 4-ethyl-1,3-oxazolidines. The absolute configurations of one enantiomeric pair have been determined from two fully refined X-ray structures, supplemented by nmr data.     

Quantitative dependence of MR signal intensity on tissue concentration of Gd(HP-DO3A) in the nephrectomized rat.

Cardiac-gated SE 20/224 +/- 20 MR images were obtained from nephrectomized rats before and after intravenously administering 153Gd-Gd(HP-DO3A). The concentration of Gd, [Gd], was linear in dose in myocardium, skeletal muscle, and blood. Under steady-state conditions, where d[Gd]/dt = 0, image intensities (IIN) in regions of interest were compared with the measured [Gd]. IIN was linear in myocardium at less than or equal to 0.61 mumol/g-myocardium (less than or equal to 0.5 mmol/kg dose) and in skeletal muscle at less than or equal to 0.63 mumol/g-muscle (less than or equal to 0.75 mmol/kg). Above 0.6 mumol Gd/g-tissue, IIN did not increase further. The in vivo data were consistent with measured ex vivo and in vivo relaxivities. A 29% greater slope for IIN versus [Gd] in myocardium [14,439 +/- 4350 IIN (mumol/g)] than in muscle [10,258 +/- 5,296 IIN/(mumol/g)] was attributed to a significant difference in blood content: 25% versus 2% weight blood in myocardium and skeletal muscle, respectively. Two components were apparent from plots of ex vivo 1/T1 versus [Gd] in myocardium and muscle, and only one for blood.