Switchable single- and dual-wavelength erbium-doped fiber laser assisted by four-wave mixing with wide and continuous tunability

A widely tunable and stable erbium-doped fiber laser based on four-wave mixing effect in a highly nonlinear fiber is proposed and experimentally demonstrated. By adjusting reflected power from a dual-selective element, the ring laser is switchable between single- and dual-wavelength operations. The tuning range of the single laser is 22.78 nm, from 1,542.07 to 1,564.85 nm, while the wavelength spacing of the dual-wavelength can be continuously tuned from 0.52 to 22.78 nm. The laser is stable with output peak power fluctuation of <1 dB in 30-min interval.     

A continuous vibration theory for rotors with an open edge crack

In this paper a new continuous model for flexural vibration of rotors with an open edge crack has been developed. The cracked rotor is considered in the rotating coordinate system attached to it. Therefore, the rotor bending can be decomposed in two perpendicular directions. Two quasi-linear displacement fields are assumed for these two directions and the strain and stress fields are calculated in each direction. Then the final displacement and stress fields are obtained by composing the displacement and stress fields in the two directions. The governing equation of motion for the rotor has been obtained using the Hamilton principle and solved using a modified Galerkin method. The free vibration has been analyzed and the critical speeds have been calculated. Results are compared with the finite element results and an excellent agreement is observed.     

An investigation of Forex market efficiency based on detrended fluctuation analysis: A case study for Iran

The efficient market hypothesis (EMH) states that asset prices fully reflect all available information. As a result, speculators cannot predict the future behavior of asset prices and earn excess profits at least after adjusting for risk. Although initial tests of the EMH were performed on stock market data, the EMH was soon applied to other markets including foreign exchange (FX). This study uses the detrended fluctuation analysis (DFA) technique to test 01:12:2005–18:04:2010 Iranian Rial/US Dollar exchange rate time series data to see if it can be explained by the weak form of the EMH. Moreover, to determine changes in the degree of inefficiency over time, the whole period has been divided into four subperiods. The study shows that the Iranian Forex market (the Rial/Dollar case) is weak-form inefficient over the whole period and in each of the subperiods. However, the degree of inefficiency is not constant over time. The findings suggest that profitable risk-adjusted trades could be made using past data.     

Structure and Mechanical Properties of 50/50 NR/SBR Blend/Pristine Clay Nanocomposites

A blend/clay nanocomposites of 50/50 (wt%) NR/SBR was prepared via mixing the latex of a 50/50 NR/SBR blend with an aqueous clay dispersion and co‐coagulating the mixture. The structure of the nanocomposite was characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Nanocomposites containing less than 10 phr clay showed a fully exfoliated structure. After increasing the clay content to 10 phr, both nonexfoliated (stacked layers) and exfoliated structures were observed in the nanocomposites. The results of mechanical tests showed that the nanocomposites presented better mechanical properties than clay‐free NR/SBR blend vulcanizate. Furthermore, tensile strength, tensile strain at break, and hardness (shore A) increased with increasing clay content, up to 6 phr, and then remained almost constant.     

Position calculation of the frequency band gap in the finite photonic crystal with multiple alternations using boundary element method

In this paper, the wave transmission from finite photonic crystals with multiple alternations is investigated using boundary element method (BEM). Since that, in these structures the alternation is not in all directions of space; the investigations of the frequency band gap with desired accuracy are not practical by analytical methods. Also, the frequency dispersion of dielectric rods is an effective parameter in photonic crystals, which this effect in our calculations has been considered. Due to the high capabilities of the BEM, the transmitted wave spectrum in the photonic crystal is calculated by changing the geometrical and optical parameters of the photonic crystal and applying more alternation in its structure and the position and width of the frequency band gap is investigated. Then, it is assumed that the photonic crystal with an arbitrary angle is rotated around the axis which is perpendicular on the crystal cross section and then, it is irradiated with a plan wave. The band gap of the photonic crystals with the desired structure, desired rotation angle and multiple alternations have been solved. Very low information volume, high speed and accuracy during the calculation and useable for any desired structures are the characteristics of this method.     

Evaluation of aerodynamic performance enhancement of Risø_B1 airfoil with an optimized cavity by PIV measurement

Journal of Visualization - Airfoils are mostly inefficient in their off-design conditions. In order to improve the aerodynamic performance of airfoils in these conditions, using an optimized cavity...     

High-gain erbium-doped fiber amplifier incorporating a double-pass amplification technique as a preamplifier

We present a high-gain erbium-doped fiber amplifier to be utilized as a preamplifier. A double-pass amplification technique is used in the first-stage amplifier together with a tunable bandpass filter. The secondstage amplifier is a counter-pumped configuration and another tunable bandpass filter is utilized to filter out amplified spontaneous emission from the first-stage amplifier. This design is able to produce a high gain of 55.6 dB and a noise figure of 6.02 dB at 1530 nm with a signal power of ?45 dBm. The receiver sensitivity measurement shows that the proposed amplifier improves the minimum detectable power from ?33.7 to ?40.8 dBm for a bit-error rate of 10^?11 at 155 Mbps.

     

Polyelectrolyte Nanocomposite Membranes Using Imidazole-Functionalized Nanosilica for Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion-exchange capacity, as well as proton conductivity. The Nafion/Im-Si membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, higher selectivity parameter in comparison to the neat Nafion or Nafion/silica membranes. The obtained results indicated that the Nafion/Im-Si membranes could be utilized as promising polyelectrolyte membranes for direct methanol fuel cell applications.     

Perfect valley polarization in MoS<Subscript>2</Subscript>

We study perfect valley polarization in a molybdenum disulfide (MoS₂) nanoribbon monolayer using two bands Hamiltonian model and non-equilibrium Green’s function method. The device consists of a one-dimensional quantum wire of MoS₂ monolayer sandwiched between two zigzag MoS₂ nanoribbons such that the sites A and B of the honeycomb lattice are constructed by the molecular orbital of Mo atoms, only. Spin-valley coupling is seen in energy dispersion curve due to the inversion asymmetry and time-reversal symmetry. Although, the time reversal symmetry is broken by applying an external magnetic field, the valley polarization is very small. A valley polarization equal to 46% can be achieved using an exchange field of 0.13 eV. It is shown that a particular spin-valley combination with perfect valley polarization can be selected based on a given set of exchange field and gate voltage as input parameters. Therefore, the valley polarization can be detected by detecting the spin degree of freedom.     

A novel robust proportional-integral （PI） adaptive observer design for chaos synchronization

In this paper, chaos synchronization in the presence of parameter uncertainty, observer gain perturbation and exogenous input disturbance is considered. A nonlinear non-fragile proportional-integral (PI) adaptive observer is designed for the synchronization of chaotic systems; its stability conditions based on the Lyapunov technique are derived. The observer proportional and integral gains, by converting the conditions into linear matrix inequality (LMI), are optimally selected from solutions that satisfy the observer stability conditions such that the effect of disturbance on the synchronization error becomes minimized. To show the effectiveness of the proposed method, simulation results for the synchronization of a Lorenz chaotic system with unknown parameters in the presence of an exogenous input disturbance and abrupt gain perturbation are reported.