Acoustic radiation force of a Bessel beam on a porous sphere

The possibility of using acoustic Bessel beams to produce an axial pulling force on porous particles is examined in an exact manner. The mathematical model utilizes the appropriate partial-wave expansion method in spherical coordinates, while Biot's model is used to describe the wave motion within the poroelastic medium. Of particular interest here is to examine the feasibility of using Bessel beams for (a) acoustic manipulation of fine porous particles and (b) suppression of particle resonances. To verify the viability of the technique, the radiation force and scattering form-function are calculated for aluminum and silica foams at various porosities. Inspection of the results has shown that acoustic manipulation of low porosity (<0.3) spheres is similar to that of solid elastic spheres, but this behavior significantly changes at higher porosities. Results have also shown a strong correlation between the backscattered form-function and the regions of negative radiation force. It has also been observed that the high-order resonances of the particle can be effectively suppressed by choosing the beam conical angle such that the acoustic contribution from that particular mode vanishes. This investigation may be helpful in the development of acoustic tweezers for manipulation of micro-porous drug delivery carrier and contrast agents.     

Structure and Mechanical Properties of 50/50 NR/SBR Blend/Pristine Clay Nanocomposites

A blend/clay nanocomposites of 50/50 (wt%) NR/SBR was prepared via mixing the latex of a 50/50 NR/SBR blend with an aqueous clay dispersion and co‐coagulating the mixture. The structure of the nanocomposite was characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Nanocomposites containing less than 10 phr clay showed a fully exfoliated structure. After increasing the clay content to 10 phr, both nonexfoliated (stacked layers) and exfoliated structures were observed in the nanocomposites. The results of mechanical tests showed that the nanocomposites presented better mechanical properties than clay‐free NR/SBR blend vulcanizate. Furthermore, tensile strength, tensile strain at break, and hardness (shore A) increased with increasing clay content, up to 6 phr, and then remained almost constant.     

An investigation of Forex market efficiency based on detrended fluctuation analysis: A case study for Iran

The efficient market hypothesis (EMH) states that asset prices fully reflect all available information. As a result, speculators cannot predict the future behavior of asset prices and earn excess profits at least after adjusting for risk. Although initial tests of the EMH were performed on stock market data, the EMH was soon applied to other markets including foreign exchange (FX). This study uses the detrended fluctuation analysis (DFA) technique to test 01:12:2005–18:04:2010 Iranian Rial/US Dollar exchange rate time series data to see if it can be explained by the weak form of the EMH. Moreover, to determine changes in the degree of inefficiency over time, the whole period has been divided into four subperiods. The study shows that the Iranian Forex market (the Rial/Dollar case) is weak-form inefficient over the whole period and in each of the subperiods. However, the degree of inefficiency is not constant over time. The findings suggest that profitable risk-adjusted trades could be made using past data.     

Polyelectrolyte Nanocomposite Membranes Using Imidazole-Functionalized Nanosilica for Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion-exchange capacity, as well as proton conductivity. The Nafion/Im-Si membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, higher selectivity parameter in comparison to the neat Nafion or Nafion/silica membranes. The obtained results indicated that the Nafion/Im-Si membranes could be utilized as promising polyelectrolyte membranes for direct methanol fuel cell applications.     

Multi-scattering in active noise control

This paper follows up on an earlier paper of the author [1] dealing with the issue of multi-scattering in a typical active noise control system. This work concerns the effects of the presence of a neighboring wall on the performance of an active noise cancellation system when the dimension of sources is added to the analysis. Effect of the adjacent wall is taken into account using the image method, and multi-scattering is also allowed for by the spherical harmonic addition theorem. The recognized method of separation of variables and appropriate wave field expansions in spherical coordination are used to derive the required analytical solutions. A primary spherical source radiates at different modes, and a secondary source is modeled as a radially vibrating cap which resembles a real sound speaker. Our particular interest in this work is to investigate effects of multi-scattering at intermediate working frequencies of ANC, e.g., about 100–500 Hz. In addition to emphasizing the importance of multi-scattering, this work endeavors to find the appropriate cap angle of the control source to achieve acceptable noise attenuation for different vibrating modes of the primary source (monopole, dipole). Numerical results reveal that the presence of a rigid wall will considerably change the adequate velocity of the secondary source and also show that using a baffled spherical piston instead of a monopole control source will obviously improve the sound minimization efficiency when the primary source vibrates in the n = 1 mode in a low frequency range. Published in Russian in Akusticheskiĭ Zhurnal, 2008, Vol. 54, No. 1, pp. 5–17. The text was submitted by the author in English.     

High-gain erbium-doped fiber amplifier incorporating a double-pass amplification technique as a preamplifier

We present a high-gain erbium-doped fiber amplifier to be utilized as a preamplifier. A double-pass amplification technique is used in the first-stage amplifier together with a tunable bandpass filter. The secondstage amplifier is a counter-pumped configuration and another tunable bandpass filter is utilized to filter out amplified spontaneous emission from the first-stage amplifier. This design is able to produce a high gain of 55.6 dB and a noise figure of 6.02 dB at 1530 nm with a signal power of ?45 dBm. The receiver sensitivity measurement shows that the proposed amplifier improves the minimum detectable power from ?33.7 to ?40.8 dBm for a bit-error rate of 10^?11 at 155 Mbps.

     

Position calculation of the frequency band gap in the finite photonic crystal with multiple alternations using boundary element method

In this paper, the wave transmission from finite photonic crystals with multiple alternations is investigated using boundary element method (BEM). Since that, in these structures the alternation is not in all directions of space; the investigations of the frequency band gap with desired accuracy are not practical by analytical methods. Also, the frequency dispersion of dielectric rods is an effective parameter in photonic crystals, which this effect in our calculations has been considered. Due to the high capabilities of the BEM, the transmitted wave spectrum in the photonic crystal is calculated by changing the geometrical and optical parameters of the photonic crystal and applying more alternation in its structure and the position and width of the frequency band gap is investigated. Then, it is assumed that the photonic crystal with an arbitrary angle is rotated around the axis which is perpendicular on the crystal cross section and then, it is irradiated with a plan wave. The band gap of the photonic crystals with the desired structure, desired rotation angle and multiple alternations have been solved. Very low information volume, high speed and accuracy during the calculation and useable for any desired structures are the characteristics of this method.     

A continuous vibration theory for rotors with an open edge crack

In this paper a new continuous model for flexural vibration of rotors with an open edge crack has been developed. The cracked rotor is considered in the rotating coordinate system attached to it. Therefore, the rotor bending can be decomposed in two perpendicular directions. Two quasi-linear displacement fields are assumed for these two directions and the strain and stress fields are calculated in each direction. Then the final displacement and stress fields are obtained by composing the displacement and stress fields in the two directions. The governing equation of motion for the rotor has been obtained using the Hamilton principle and solved using a modified Galerkin method. The free vibration has been analyzed and the critical speeds have been calculated. Results are compared with the finite element results and an excellent agreement is observed.     

Evaluation of aerodynamic performance enhancement of Risø_B1 airfoil with an optimized cavity by PIV measurement

Journal of Visualization - Airfoils are mostly inefficient in their off-design conditions. In order to improve the aerodynamic performance of airfoils in these conditions, using an optimized cavity...