Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

Synthesis,Structure and Adsorption of AlPO-21 Prepared by Co-template Method

IntroductionAlPO 2 1isatypeofmicroporousaluminophosphatepreparedbyFlanigenandco workersin 1982 ,andthestructurewasresolvedbySmithetal.1in 1984 .AlmostatthesametimePariseetal.2 preparedAlPO 2 1phasebyanotherrouteandresolvedthestructureindependently .Inthenextyear ,GaPO 2 1phasewasobtainedaswell.3Al thoughAl(Ga)PO 2 1phasespreparedindifferentwayspossesssimilarchannelsystem ,amongthemtherearestillsomedifferencesinlatticeconstants ,indicatingthatdiffer enttemplatemoleculescanaffectlocallythe…     

STUDY ON BIODEGRADABILITY OF POLY (3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE)/ORGANOPHILIC MONTMORILLONITE NANOCOMPOSITES

1. INTRODUCTION Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been recognized as apotential environment-friendly substitute for traditional plastics. The structure, mechanicalproperties and biodegradability of PHBV as biodegradable plastic have been reported by many groups [1-3]. However, PHBV presents some problems, such as high cost, slow crystallization rate, relatively difficult processing and high degree of crystallinity. Therefore, it is difficult to use PHBV widel…     

New Photoluminescence Phenomena of Ge／SiO2 Glass Synthesized by Sol-gel Method

New Ge/SiO2 glasses have been synthesized by heating the GeO2/SiO2 dry gels under H2 gas at 700℃. The resulting fluorescence spectra show that this kind of Ge/SiO2 glasses emit strong photoluminescence at 392 nm (3.12 eV), medium strong photoluminescence at 600 nm (2.05 eV) and weak photoluminescence at 770 nm (1.60 eV) respectively. Possible photoluminescence mechanisms are also discussed based on the results of X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS).     

Synthesis, Structure and Biological Activities of Novel Triazole Compounds Containing N,N-Dialkyldithiocarbamate Moiety

Introduction As an important type of fungicides, triazole compounds are highly efficient, low poisonous and inward absorbent.1-3 At present, the studies on triazole derivatives are mainly concentrated on compounds with triazole as the only active group. The report of triazole compounds that contain both triazole group and other active group in a single molecule has rarely been found. Dialkyl-substituted dithiocarbamate salts have also shown interesting biological effects.4 N,N-Dialkyldithio-…     

X射线荧光分析中熔融制样条件的研究

本文研究了熔融制样时熔融温度、熔融时间和脱模剂的加入量对分析结果的影响。研究结果表明,随着熔融温度的升高和熔融时间的加长,分析结果的总值将随之增大。相反,脱模剂量的增加会使分析结果降低。通过对熔融样品时产生的升华物的研究,发现在熔触过程中,四硼酸锂比样品以更大的比例逸出熔融体,从而造成了样品在分析圆片中的相对浓缩。而且在高温熔融时,钾和钠比样品中的其他元素例如硅、铝、铁、钛、钙、镁等更易于逸失。制样条件的不同引起样品和熔剂逸失的比例会有变化,它直接影响测定的结果,这证明了在X射线荧光光谱分析中保持制样条件一致的重要性。     

弱酸树脂D113对S-腺苷-L-蛋氨酸的交换行为及分离应用研究

考察了S-腺苷-L-蛋氨酸 (S-adenosyl-L-methionine, SAM) 在弱酸树脂争光D113上的静态吸附及分离行为,利用Langmuir等温式对平衡等温线进行了拟合,实验表明,随着pH的提高,平衡交换量增加,提高温度和SAM的初始浓度在一定程度上能促进内扩散过程,利用D113树脂在f 1.7×30.0cm小型柱上从酵母提取液中分离SAM的得率为90%以上,纯度达87%以上。     

微生物合成的β-羟基丁酸酯与β-羟基己酸酯共聚物/聚乳酸共混材料(PHBHHx/PLA)的力学性能与生物降解性研究

通过熔融共混法制备了聚乳酸/微生物产β-羟基丁酸酯与β-羟基己酸共聚物的共混物(PLA/PHBHHx)。采用拉伸力学试验研究了共混物的力学性能。通过土壤悬浊培养降解法和扫描电子显微镜(SEM)分析对共混材料的生物降解性能进行了研究。实验结果表明,随着PHBHHx含量的增加,共混物的拉伸强度和杨氏模量降低,而生物降解速率却显著提高。但是,在175h之前,重量组成比为20/80的共混物降解速率比纯PHBHHx还要快。综合分析表明,共混材料PLA/PHBHHx的重量比为20/80时,具有优良的力学性能和生物降解性。     

Towards Single-component Molecular Conductor [Ni(dmit)_2] by Charge Disproportionation:2[Ni(dmit)_2]~(-0.5)[Ni(dmit)_2]+[Ni(dmit)_2]~-

It was commonly thought that a molecular conductor or semiconductor should be composed of at least two components to make the conducting component in partially charged state. However, this idea became questionable by the recent report of the single-component molecular conductor [Ni(tmdt)2]1 as well as several reports about single-component molecular semiconductors such as [Ni(ptdt)2]2 and [Ni(C10H10S8)2]3. In fact, as early as 1985, [Ni(dmit)2] as a by-product in synthesizing TTF[Ni(dmit…     

Electrochemical Characteristics of Mg0.9Ti0.1-xZrxNi （x=0.02, 0.04, 0.06） Alloys

Mg-based hydrogen storage alloys Mg0.9Ti0.1-xZrxNi (x=0.02, 0.04, 0.06) were successfully prepared by means of mechanical alloying (MA). The effects of Zr addition on the discharge capacity and the cycle performance of the Mg-based electrodes were also studied. It was found that the discharge capacities were improved with addition of a small amount of Zr and the cycle performances of the alloy were stabilized with the addition of Ti. The effects of surface modification or coating on the properties of Mg0.9Ti0.06Zr0.04Ni were also studied. The results indicated that coating with graphite improved both the discharge capacity and cycle life of the amorphous Mg0.9Ti0.06Zr0.04Ni electrode.