Synthesis, conformation and PKC isozyme surrogate binding of indolinelactam-Vs, new conformationally restricted analogues of (−)-indolactam-V

New conformationally restricted analogues of tumor promoter (−)-indolactam-V (1), indolinelactam-Vs (8, 11) and their hexyl derivatives at position 1 or 7 (9, 10, 12, 13), were synthesized from 1. (3R)-Indolinelactam-V (8) adopted a conformation similar to the twist form of 1 with a cis amide, while the conformation of (3S)-indolinelactam-V (11) was close to that of the sofa form of 1 with a trans amide. 7-Hexyl derivatives of 8 and 11 (10, 13) showed binding affinities for C1 domains of protein kinase C (PKC) isozymes compared to 1, but exhibited little selectivity among these PKC isozymes. However, introduction of the hexyl group at position 1 of 8 and 11 significantly enhanced their binding selectivity for novel PKC isozymes. The best selectivity for novel PKC isozymes was observed in (3S)-1-hexylindolinelactam-V (12) with a sofa-like conformation. These results suggest that a sofa-restricted analogue of 1 with a hydrophobic chain at an appropriate position would be a promising lead for designing agents with a high selectivity for novel PKC isozymes.     

Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

Evaluation of postoperative hepatobiliary function by deconvolution analysis of hepatobiliary image data by 99mTc-N-pyridoxyl-5-methyltryptophan

Dynamic hepatobiliary image data were analyzed by the mathematical deconvolution to derive the transfer function (TF) which represents the impulse response function of the liver following direct bolus injection of a tracer into the liver. Biliary flow was evaluated by TF in patients with previous hepatobiliary surgery to detect abnormal flow causing problems such as cholangitis. Serial image data were collected for 60 min after intravenous injection of 37-75 MBq (1-2 mCi) of 99mTc-N-pyridoxyl-5-methyltryptophan (99mTc-PMT). TF was obtained by the matrix algorithm, using regional hepatogram as output and time-activity curve over the heart as input function. Minimum, mean and maximum transit time (Max. TT) were determined from TF. The functional image for each of the transit times was constructed by displaying the distribution of the values for matrix elements with a color scale. In this study, a critical Max. TT of 60 min was used to detect abnormal biliary flow. Of 30 cases, 9 positive cases were discriminated from 21 negative cases on the basis of the finding of presence or absence of areas with Max. TT of more than 60 min anywhere in the liver. Bowel activity overlapping the liver was excluded in the judgment. The validity of this method was evaluated in comparison with the clinical courses after surgery with (8 cases) or without (22 cases) problems. The results were sensitivity of 88%, specificity of 91%, accuracy of 90% and positive predictive value of 78%.(ABSTRACT TRUNCATED AT 250 WORDS)     

On-line measurement of intramolecular carbon isotope distribution of acetic acid by continuous-flow isotope ratio mass spectrometry

Molecular and intramolecular carbon isotope measurements of acetic acid present in natural environments have been performed by off-line procedures. The off-line method is complicated and time-consuming and requires micromolar to millimolar amounts of sample. This limits geochemical isotopic studies, especially at the intramolecular level, on acetic acid present in natural samples. Here, we examine an on-line measurement of intramolecular carbon isotope distribution of acetic acid using continuous-flow isotope ratio mass spectrometry (CF-IRMS) coupled with an on-line pyrolysis system. This is achieved by measurement of the respective carbon isotope ratios of CH4 and CO2 produced by on-line pyrolysis of acetic acid. Results for authentic standards of pure acetic acid demonstrated the practicality of this on-line method, although the carbon isotope ratio of the methyl group could not be determined directly. The precision of the carbon isotope measurements was 0.4 per thousand (1sigma). The carbon isotope distribution determined by the on-line method was identical to that determined by the conventional off-line method within analytical error. The advantages of the on-line method compared with the conventional off-line method are that it is less laborious, requires less analytical time (less than one hour per sample) and, most importantly, uses smaller sample sizes (ca. 10 nanomole). An application of this on-line method to natural geochemical samples will provide an insight into the geochemical cycle of acetic acid.     

UVB irradiation of normal human skin favors the development of type-2 T-cells in vivo and in primary dermal cell cultures

To determine the effect of UVB exposure on the balance of type-1 or type-2 T-cells in skin, we examined the expression of key markers interferon (IFN)-gamma and interleukin (IL)-4 in cryostat sections. IFN-gamma mRNA was clearly detectable in nonirradiated control skin, and IFN-gamma protein was found in 2% of the dermal CD3pos T-cells, whereas IL-4 mRNA was hardly detectable, and no IL-4 protein was found. In contrast, IL-4 mRNA expression increased upon irradiation, and IL-4 was found in 2% of the T-cells at day 2 after UVB-exposure. Concomitantly, IFN-gamma mRNA expression decreased, and IFN-gamma protein became absent. We also analyzed T-cells present in primary dermal cell cultures, which were used as an in vitro equivalent of the in vivo situation. As compared with T-cells from control skin, T-cells in dermal cell cultures from UVB-exposed skin displayed an increased IL-4 and decreased IFN-gamma expression. No such skewing occurred when the T-cells from irradiated skin were cloned in the absence of a dermal microenvironment. Except for an occasional positive T-cell, type-1-associated cell-surface markers (CCR5, CXCR3) or type-2 markers (CCR3, CD30, CRTH2) were undetectable in situ. But these markers were expressed on cultured dermal T-cells from UVB-exposed and control skin at a comparable level, but did not correlate with the IFN-gamma and IL-4 production. Altogether, UVB-induced changes of the dermal microenvironment favor the development of type-2 T-cells.     

Preconcentration and determination of calcium and magnesium in brine with flow-injection systems

On-line preconcentration on a chelating resin (Dowex A-1) and elution with 0.1 M hydorchloric acid is followed by spectrophotometry based on the metal complexes formed with 1- (2-hydroxy-4-diethylamino-1-phenylazo)-2-hydroxynaphthalene-3,6-disulfonic acid. The total concentration of calcium and magnesium is determined; in a second sample, calcium is masked with a ligand buffer containing excess of barium(II) and EGTA, and magnesium is determined. The calcium concentration is measured by difference. Magnesium (1–30 μg l^?1 and calcium (8– 10 μg l^?1) in 2.5 M sodium chloride can be determined. Calcium and magnesium in analytical reagent-grade sodium chloride and potassium chloride and primary standard sodium chloride are aslo determined. The method based on the exchange between calcium ions and Mg(EDTA) is proposed to enchance the sensitivity for calcium.     

1,2-silyl-migrative cyclization of vinylsilanes bearing a hydroxy group: stereoselective synthesis of multisubstituted tetrahydropyrans and tetrahydrofurans(1)

Acid-catalyzed intramolecular addition of a hydroxy group to alpha-alkylated vinylsilanes has been studied. Treatment of (Z)-5-alkyl-5-silyl-4-penten-1-ols 1 (R = alkyl) with 5 mol % TiCl(4) in CHCl(3) gave trans-2-alkyl-3-silyltetrahydropyrans 2 exclusively (trans/cis = >99/1 to 97/3). The cyclization efficiency and rate strongly depended on the geometry of the C-C double bond and the silyl group. The use of (E)-vinylsilanes resulted in lower yields with poor cis-selectivity. In the cyclization of (Z)-1 (R = Bu), the silyl group used, the reaction time, and the yield of 2 were as follows: SiMe(2)Ph, 9.5 h, 75%; SiMe(3), 7.5 h, 66%; SiMePh(2), 24 h, 58%; SiMe(2)-t-Bu, 0.75 h, 85%; SiMe(2)Bn, 1.5 h, 78%. This 1,2-silyl-migrative cyclization could be applied to stereoselective synthesis of trisubstituted tetrahydropyrans. The acid-catalyzed reaction of 1-, 2-, or 3-substituted (Z)-5-silyl-4-nonen-1-ols 8 gave r-2,t-3,c-6-, r-2,t-3,t-5-, or r-2,t-3,c-4-trisubstituted tetrahydropyrans with high diastereoselectivity, respectively. (Z)-4-Alkyl-4-silyl-3-buten-1-ols 5 as well as 1 underwent the 1,2-silyl-migrative cyclization to give 2-alkyl-3-silyltetrahydrofurans 6 with high trans-selectivity. This silicon-directed cyclization was also available for the stereoselective synthesis of tri- and tetrasubstituted tetrahydrofurans.     

Formation process of silver-polypyrrole coaxial nanocables synthesized by redox reaction between AgNO3 and pyrrole in the presence of poly(vinylpyrrolidone)

We have recently demonstrated a one-step process to fabricate silver-polypyrrole (PPy) coaxial nanocables (Chen, A.; Wang, H.; Li, X. Chem. Commun. 2005, 14, 1863). The formation process of silver-PPy coaxial nanocables is discussed in this article. It was found from the results of TEM and SEM images that large numbers of silver atoms were formed when AgNO3 was added to a pyrrole solution. Then silver atoms transform to silver-PPy nanosheets with regular morphology, which will connect together to be more stable. Silver-PPy nanocables will be able to grow at the expense of the silver-PPy nanosheets. Poly(vinylpyrrolidone) (PVP) plays crucial roles in this process: as a capping agent to form silver nanowires, and as a dispersant of pyrrole monomers, which can influence the site at which pyrrole monomer exists. On the basis of experimental analysis, the possible mechanism was proposed. Because of the effect of PVP, silver ions and pyrrole monomers are apt to be adsorbed at the [111] and [100] facets of silver nanosheets, respectively. Obvious polymerization will take place on the boundary of the [111] and [100] facets. The PPy layer stays stable on the [100] facets. Meanwhile, newly formed silver atoms and silver nanosheets will further ripen and grow on the [111] facets. In a word, the morphology of final products and the formation process are determined by the reaction site between AgNO3 and the pyrrole monomer, which is influenced by PVP.     

Self-organized lipid-porphyrin bilayer membranes in vesicular form: nanostructure,photophysical properties,and dioxygen coordination

An amphiphilic tetraphenylporphyrin and its iron complex bearing four phospholipid substituents, in which a trimethylolethane residue connects the two acyl chains (lipid-porphyrins), have been synthesized. The free-base lipid-porphyrin 6a self-organizes in aqueous media to form spherical unilamellar vesicles with a diameter of 100 nm and a uniform thickness of 10 nm, which corresponds to twice the length of the molecule. In the visible absorption spectrum, the porphyrin Soret band was significantly red-shifted (12 nm) relative to that of the monomer in benzene/MeOH solution due to the excitonic interaction of the porphyrin chromophores. The [symbol: see text]-A isotherm of 6a gave an area per molecule of 2.2 nm2, which allowed the estimation of the number of molecules in a single vesicle (2.3 x 10(4)). Double-layered Langmuir-Blodgett (LB) films of 6a on a glass surface exhibited an absorption spectrum identical to that of the 6a vesicles in bulk aqueous solution, and this suggests that they contain similar geometric arrangements of the porphyrin moieties. Exciton calculations on the basis of our structural model reproduced the bathochromic shift of the Soret band well. In the photophysical properties of the 6a vesicles, the characteristics of J-aggregated porphyrins substantially predominate: strong fluorescence and extremely short triplet lifetime. The iron complex 6b with a small molar excess of 1-dodecylimidazole (DIm) also formed spherical unilamellar vesicles (100 nm phi). Scanning force microscopy after evaporation on a graphite surface revealed 6b/DIm vesicles with a vertical height of 19.8 nm, which coincided with the thickness of the double bilayer membranes. The ferrous 6c formed a bis(DIm)-coordinated low-spin FeII complex under an N2 atmosphere. Upon addition of O2 to this solution, a kinetically stable O2 adduct was formed at 37 degrees C with a half-life of 17 h. Distinct gel-phase (liquid-crystal) transitions of the lipid-porphyrin membranes were clearly observed; the free base 6a displayed a higher transition temperature (56 degrees C) than the iron complex. Magnetic circular dichroism and infrared spectroscopic studies proved that molecular O2 coordinates to the self-organized lipid-porphyrinatoiron(II) vesicles in aqueous media.