Semiconductor and Metallic Core–Shell Nanostructures: Synthesis and Applications in Solar Cells and Catalysis

Nano‐heterostructures have attracted great attention due to their extraordinary properties beyond those of their single‐component counterparts. This review focuses on a specific type of hybrid structures: core–shell structures. In particular, we present and discuss the recent wet‐chemical synthesis approaches for semiconductor and metallic core–shell nanostructures, and their relevant properties and potential applications in photovoltaics and catalysis, respectively.     

Cellulosic nanocomposite membranes from hydroxypropyl cellulose reinforced by cellulose nanocrystals

Cellulosic nanocomposite membranes were prepared by incorporation of cellulose nanocrystals (CNCs) into a hydroxypropyl cellulose (HPC) matrix using a mixing/evaporation technique. CNCs were obtained from filter paper using the sulfuric acid hydrolysis method with the aid of ultrasonication. The relationship between the microstructure and mechanical properties of the CNCs/HPC nanocomposite membranes was studied. Scanning electron microscopy showed that the CNCs were well dispersed in the HPC matrix, and the fracture surface demonstrated a fibrous characteristic. With increasing CNCs content, the tensile strength and Young’s modulus of the CNCs/HPC nanocomposite membranes gradually increased. At 5 wt% content of CNCs, the strength was increased by 525 % and the Young’s modulus by 124 % compared with pure HPC membrane. Moreover, the effect of the phase change of HPC on the mechanical properties of the CNCs_5wt%/HPC nanocomposite membranes and the corresponding mechanism were also studied.     

Preparation and characterization of activated carbon from pine cone by microwave-induced ZnCl2 activation and its effects on the adsorption of methylene blue

In this work, activated carbon prepared from pine cone (PCAC) with ZnCl₂ as an activation agent under microwave radiation was investigated. The activation step was performed at the microwave input power of 400 W and radiation time of 5 min. The properties of activated carbon were characterized by N₂ adsorption Brunauer–Emmett–Teller (BET), scanning electron microscopy and Fourier transform infrared spectroscopy. Results showed that the BET surface area, Langmuir surface area, and total pore volume of PCAC were 939, 1,486 m²/g and 0.172 cm³/g, respectively. Adsorption capacity was demonstrated by the iodine numbers. The adsorptive property of PCAC was tested using methylene blue dye. Equilibrium data was best fitted by the Langmuir isotherm model, showing a monolayer adsorption capacity of 60.97 mg/g. The pseudo-first- and pseudo-second-order kinetic models were examined to evaluate the kinetic data, and the rate constants were calculated. Adsorption of the dyes followed pseudo-first order kinetics. Thermodynamic parameters such as free energy, enthalpy and entropy of dye adsorption were obtained.     

盐析剂——氯化钠存在下稀土含量的准确测定

分光光度法(Spectrophotometry)和电感耦合等离子体发射光谱法(ICP-AES)是常用的测定单一稀土含量的方法。但是萃取稀土过程中通常会加入盐析剂NaCl,萃余水相中大量钠离子所产生的光谱背景严重干扰了稀土含量的测定。考察了NaCl对稀土含量测定的影响,实验结果表明:在基体不匹配的情况下,只有当钠盐浓度低于0.08 mol·L-1时,分光光度法可以准确测定萃余液中单一轻稀土(La,Ce,Pr,Nd)及中稀土(Sm,Eu,Gd)的含量,但不能准确测定重稀土的含量;而使用ICP-AES法,在NaCl浓度为0.001~1.0 mol·L-1条件下无法准确测定稀土含量。因此,实验室宜采用分光光度法在基体不匹配的条件下测定轻、中稀土含量,重稀土在基体匹配的条件下用电感耦合等离子体发射光谱法测定。     

ICS–2100型离子色谱仪工作性能检验分析

对淮河流域水环境监测中心新购置的ISC–2100型离子色谱仪进行了工作性能检验。保留时间重现性为0.664%~1.501%(n=10),4种阴离子(F–,Cl–,SO42–,NO3––N)标准曲线的线性相关系数大于0.999。对硝酸盐氮标准物质进行测定,测定结果的相对标准偏差为0.23%(n=8),加标回收率为91.8%~95.9%。实验结果表明,该离子色谱仪仪器性能稳定,各项检验结果满足实际监测工作的要求。     

Catalytic Ethanolysis of Kraft Lignin into High‐Value Small‐Molecular Chemicals over a Nanostructured α‐Molybdenum Carbide Catalyst

We report the complete ethanolysis of Kraft lignin over an α‐MoC_1?x/AC catalyst in pure ethanol at 280 °C to give high‐value chemicals of low molecular weight with a maximum overall yield of the 25 most abundant liquid products (LP25) of 1.64 g per gram of lignin. The LP25 products consisted of C₆–C₁₀ esters, alcohols, arenes, phenols, and benzyl alcohols with an overall heating value of 36.5 MJ kg^?1. C₆ alcohols and C₈ esters predominated and accounted for 82 wt % of the LP25 products. No oligomers or char were formed in the process. With our catalyst, ethanol is the only effective solvent for the reaction. Supercritical ethanol on its own degrades Kraft lignin into a mixture of small molecules and molecular fragments of intermediate size with molecular weights in the range 700–1400, differing in steps of 58 units, which is the weight of the branched‐chain linkage C₃H₆O in lignin. Hydrogen was found to have a negative effect on the formation of the low‐molecular‐weight products.     

Uncovering the Stoichiometry of Pyrococcus furiosus RNase P,a Multi‐Subunit Catalytic Ribonucleoprotein Complex,by Surface‐Induced Dissociation and Ion Mobility Mass Spectrometry

We demonstrate that surface‐induced dissociation (SID) coupled with ion mobility mass spectrometry (IM‐MS) is a powerful tool for determining the stoichiometry of a multi‐subunit ribonucleoprotein (RNP) complex assembled in a solution containing Mg²⁺. We investigated Pyrococcus furiosus (Pfu) RNase P, an archaeal RNP that catalyzes tRNA 5′ maturation. Previous step‐wise, Mg²⁺‐dependent reconstitutions of Pfu RNase P with its catalytic RNA subunit and two interacting protein cofactor pairs (RPP21?RPP29 and POP5?RPP30) revealed functional RNP intermediates en route to the RNase P enzyme, but provided no information on subunit stoichiometry. Our native MS studies with the proteins showed RPP21?RPP29 and (POP5?RPP30)₂ complexes, but indicated a 1:1 composition for all subunits when either one or both protein complexes bind the cognate RNA. These results highlight the utility of SID and IM‐MS in resolving conformational heterogeneity and yielding insights on RNP assembly.     

Lysosomal pH Rise during Heat Shock Monitored by a Lysosome‐Targeting Near‐Infrared Ratiometric Fluorescent Probe

Heat stroke is a life‐threatening condition, featuring a high body temperature and malfunction of many organ systems. The relationship between heat shock and lysosomes is poorly understood, mainly because of the lack of a suitable research approach. Herein, by incorporating morpholine into a stable hemicyanine skeleton, we develop a new lysosome‐targeting near‐infrared ratiometric pH probe. In combination with fluorescence imaging, we show for the first time that the lysosomal pH value increases but never decreases during heat shock, which might result from lysosomal membrane permeabilization. We also demonstrate that this lysosomal pH rise is irreversible in living cells. Moreover, the probe is easy to synthesize, and shows superior overall analytical performance as compared to the existing commercial ones. This enhanced performance may enable it to be widely used in more lysosomal models of living cells and in further revealing the mechanisms underlying heat‐related pathology.     

Enhancement of Solar Hydrogen Evolution from Water by Surface Modification with CdS and TiO2 on Porous CuInS2 Photocathodes Prepared by an Electrodeposition–Sulfurization Method

Porous films of p‐type CuInS₂, prepared by sulfurization of electrodeposited metals, are surface‐modified with thin layers of CdS and TiO₂. This specific porous electrode evolved H₂ from photoelectrochemical water reduction under simulated sunlight. Modification with thin n‐type CdS and TiO₂ layers significantly increased the cathodic photocurrent and onset potential through the formation of a p–n junction on the surface. The modified photocathodes showed a relatively high efficiency and stable H₂ production under the present reaction conditions.     

Molecularly Precise Dendrimer–Drug Conjugates with Tunable Drug Release for Cancer Therapy

The structural preciseness of dendrimers makes them perfect drug delivery carriers, particularly in the form of dendrimer–drug conjugates. Current dendrimer–drug conjugates are synthesized by anchoring drug and functional moieties onto the dendrimer peripheral surface. However, functional groups exhibiting the same reactivity make it impossible to precisely control the number and the position of the functional groups and drug molecules anchored to the dendrimer surface. This structural heterogeneity causes variable pharmacokinetics, preventing such conjugates to be translational. Furthermore, the highly hydrophobic drug molecules anchored on the dendrimer periphery can interact with blood components and alter the pharmacokinetic behavior. To address these problems, we herein report molecularly precise dendrimer–drug conjugates with drug moieties buried inside the dendrimers. Surprisingly, the drug release rates of these conjugates were tailorable by the dendrimer generation, surface chemistry, and acidity.