Effect of mechanical activation of reagents’ mixture on the high-temperature synthesis of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiB<Subscript>2</Subscript> composite powder

A powder mixture of Al/TiO₂/H₃BO₃ = 10/3/6 in molar ratio was used in this study to form the Al₂O₃–TiB₂ ceramic composite via thermite reactions (combustion synthesis). As no combustion synthesis occurred for an unmilled sample in a furnace, the mixture was milled in a planetary ball-mill for various milling times, and the as-milled samples were in situ synthesized in the furnace at a heating rate of 10 °C/min. The differential scanning calorimetry (DSC) measurements were performed with the same heating rate on the unmilled and the as-milled samples to evaluate the influences of the milling on the mechanisms and efficiencies of reactions. Although no combustion synthesis occurred for the unmilled sample in the furnace, two exothermic peaks were detected in its DSC curve after the melting of the Al. For the as-milled samples, significant changes revealed in the DSC curves, suggest that the milling process before the combustion synthesis changed the mechanisms and efficiencies of reactions. In addition, the intensity and the temperature of the exothermic peaks in the DSC curves changed by increasing the milling time. According to the XRD analyses, by enhancing the milling time, the purity of the final products would increase, confirming that the efficiency of the reactions increased. Finally, the microstructures of the as-milled and as-synthesized samples were examined by a SEM, and it was shown that the morphology of the reactant powders was altered by increasing the milling time.     

Identification and characterization of stressed degradation products of metoprolol using LC/Q-TOF-ESI-MS/MS and MS(n) experiments

A rapid, specific and reliable isocratic high-performance liquid chromatography combined with quadrupole time-of-flight electrospray ionization tandem mass spectrometry (LC/Q-TOF-ESI-MS/MS) method has been developed and validated for the identification and characterization of stressed degradation products of metoprolol. Metoprolol, an anti-hypertensive drug, was subjected to hydrolysis (acidic, alkaline and neutral), oxidation, photolysis and thermal stress, as per ICH-specified conditions. The drug showed extensive degradation under oxidative and hydrolysis (acid and base) stress conditions. However, it was stable to thermal, neutral and photolysis stress conditions. A total of 14 degradation products were observed and the chromatographic separation of the drug and its degradation products was achieved on a C(18) column (4.6 × 250 mm, 5 μm). To characterize degradation products, initially the mass spectral fragmentation pathway of the drug was established with the help of MS/MS, MS(n) and accurate mass measurements. Similarly, fragmentation pattern and accurate masses of the degradation products were established by subjecting them to LC-MS/QTOF analysis. Structure elucidation of degradation products was achieved by comparing their fragmentation pattern with that of the drug. The degradation products DP(2) (m/z 153) and DP(14) (m/z 236) were matched with impurity B, listed in European Pharmacopoeia and British Pharmacopoeia, and impurity I, respectively. The LC-MS method was validated with respect to specificity, linearity, accuracy and precision.     

Stimulus-responsiveness and drug release from porous silicon films ATRP-grafted with poly(N-isopropylacrylamide)

In this report, we employ surface-initiated atom transfer radical polymerization (SI-ATRP) to graft a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM), of controlled thickness from porous silicon (pSi) films to produce a stimulus-responsive inorganic-organic composite material. The optical properties of this material are studied using interferometric reflectance spectroscopy (IRS) above and below the lower critical solution temperature (LCST) of the PNIPAM graft polymer with regard to variation of pore sizes and thickness of the pSi layer (using discrete samples and pSi gradients) and also the thickness of the PNIPAM coatings. Our investigations of the composite's thermal switching properties show that pore size, pSi layer thickness, and PNIPAM coating thickness critically influence the material's thermoresponsiveness. This composite material has considerable potential for a range of applications including temperature sensors and feedback controlled drug release. Indeed, we demonstrate that modulation of the temperature around the LCST significantly alters the rate of release of the fluorescent anticancer drug camptothecin from the pSi-PNIPAM composite films.     

Identification and structural characterization of in vivo metabolites of ketorolac using liquid chromatography electrospray ionization tandem mass spectrometry (LC/ESI‐MS/MS)

In vivo metabolites of ketorolac (KTC) have been identified and characterized by using liquid chromatography positive ion electrospray ionization high resolution tandem mass spectrometry (LC/ESI‐HR‐MS/MS) in combination with online hydrogen/deuterium exchange (HDX) experiments. To identify in vivo metabolites, blood urine and feces samples were collected after oral administration of KTC to Sprague–Dawley rats. The samples were prepared using an optimized sample preparation approach involving protein precipitation and freeze liquid separation followed by solid‐phase extraction and then subjected to LC/HR‐MS/MS analysis. A total of 12 metabolites have been identified in urine samples including hydroxy and glucuronide metabolites, which are also observed in plasma samples. In feces, only O‐sulfate metabolite and unchanged KTC are observed. The structures of metabolites were elucidated using LC‐MS/MS and MSⁿ experiments combined with accurate mass measurements. Online HDX experiments have been used to support the structural characterization of drug metabolites. The main phase I metabolites of KTC are hydroxylated and decarbonylated metabolites, which undergo subsequent phase II glucuronidation pathways. Copyright © 2012 John Wiley & Sons, Ltd.     

The highest background radiation school in the world and the health status of its students and their offspring

Although the average effective human dose from natural background radiation is about 2.4 mSv per year, the students of the Saeid Nafisi school in Ramsar received effective doses of about 250 mSv while studying there for over 5 years. The goal of this project was a retrospective study of the health status of former students of this school and their offspring. The list of the students of the Saeid Nafisi school (high background radiation) and Taleghani and Kashani schools (ordinary background radiation) was provided by the Department of Education. After matching sex, age and socioeconomic level and obtaining their consent, part 1 of the specifically designed questionnaire was filled out by interview, and clinical examinations were recorded in part 2 of the questionnaire by a physician. The data were analysed using Statistical Package for the Social Sciences 16. Our study shows that 88.1 % of general examinations of high background radiation school students were normal as compared with 85.7 % for control group. There were no significant differences. This study is interesting and unique. It reveals that there is no health emergency related to these high radiation doses. We recommend continuing the health supervision of this population in the future.     

Tailored polymers by free radical processes

This paper describes a versatile and effective method for the control of free radical polymerization and its use in the preparation of narrow polydispersity polymers of various architectures. Living character is conferred to conventional free radical polymerization by the addition of a thiocarbonylthio compound of general structure S=C(Z)SR, for example, S=C(Ph)SC(CH₃)₂Ph. The mechanism involves Reversible Addition-Fragmentation chain Transfer and, for convenience of referral, we have designated it the RAFT polymerization. The process is compatible with a very wide range of monomers including functional monomers such as acrylic acid, hydroxyethyl methacrylate, and dimethylaminoethyl methacrylate. Examples of narrow polydispersity (≤1.2) homopolymers, copolymers, gradient copolymers, end-functional polymers, star polymers, A-B diblock and A-B-A triblock copolymers are presented.