Amino acid conjugates of 1,1'-diaminoferrocene. Synthesis and chiral organization

1,1'-bis(tert-butoxycarbonylamino)ferrocene (6), a protected derivative of 1,1'-diaminoferrocene, has been synthesized by a very convenient method and serves as a synthon for 1,1'-diaminoferrocene. Its structure in solid state and in solution has been studied by NMR and X-ray crystallography. 1,1'-bis(tert-butoxycarbonylamino)ferrocene serves as starting material for the synthesis of amino acid conjugates of L- and D-alanine. The structures of these bioconjugates have been studied by NMR and CD spectroscopy and X-ray crystallography and reveal that the chiral organization of the podant amino acid chains is controlled by the chirality of the attached amino acid. The substituents engage in strong intramolecular H-bonding generating 14-membered H-bonded rings, a motif previously unrealized in ferrocene-amino acid and peptide conjugates.     

Synthesis,moisture resistance,thermal, chemical and SEM analysis of macro-defect-free (MDF) cements

The results, presented here discusses the Macro-Defect-Free (MDF) cements prepared from the blends of sulfoaluminate ferrite belite (SAFB) clinkers, ordinary Portland cement (OPC), Al₂O₃ and poly(butyl acrylate) (PBA), styrene/acrylonitrile co-polymer (SACP) or sodium polyphosphate (poly-P). Though MDF cements have several attractive properties, their utilization has been limited due to the insufficient moisture resistance. It is a very challenging task for scientists and technologist to improve the moisture resistance of MDF cements. Therefore, the new MDF cements were subjected to various moist atmospheres to investigate their moisture resistance. The most significance of this work is the improvement of moisture resistance of the studied MDF cements. The aim of this work was to understand the effects of polymers, Al₂O₃, OPC and SAFB clinkers in the raw mix and delayed drying on MDF cements and also on their subsequent moisture resistance and thermal stability as well as to discover the new properties of these materials. Their chemical, thermal and scanning electron microscopic (SEM) analysis was also carried out before and after exposure to moisture. PBA was found to be the most suitable polymer for MDF cement synthesis, since the samples containing PBA showed the highest resistance to moisture. There are three main temperature regions on TG curves of both series of MDF cement samples. The significant differences in SEM of MDF cements before and after moisture attack and with different polymers were observed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Interaction of glutathione S-transferase with hypericin: A photophysical study

The photophysics of hypericin have been studied in its complex with two different isoforms, A1-1 and P1-1, of the protein glutathione S-transferase (GST). One molecule of hypericin binds to each of the two GST subunits. Comparisons are made with our previous results for the hypericin/human serum albumin complex (Photochem. Photobiol. 1999, 69, 633-645). Hypericin binds with high affinity to the GSTs: 0.65 microM for the A1-1 isoform and 0.51 microM for the P1-1 isoform (Biochemistry 2004, 43, 12761-12769). The photophysics and activity of hypericin are strongly modulated by the binding protein. Intramolecular hydrogen-atom transfer is suppressed in both cases. Most importantly, while there is significant singlet oxygen generation from hypericin bound to GST A1-1, binding to GST P1-1 suppresses singlet oxygen generation to almost negligible levels. The data are rationalized in terms of a simple model in which the hypericin photophysics depends entirely upon the decay of the triplet state by two competing processes, quenching by oxygen to yield singlet oxygen and ionization, the latter of these two are proposed to be modulated by A1-1 and P1-1.     

The g-value of the 2E state of K3CR(CN)6 and the lower symmetry field

The ⁴A₂ → ²E transition of potassium chromicyanide has been studied under magnetic field. It has been found that the g-value is nearly isotropic, quite unlike the case of ruby. An attempt has been made to explain the zero-field splittings of ^2E, ²T₁ and ²T₂ states and the g-value of the ²E state on the assumption that the distant ions are mainly responsible for lowering of symmetry of the crystal field from O_h. A reasonable choice of parameters can make the calculated values agree with the observed ones.     

Reactivity of ionic liquids

Ionic liquids are becoming widely used in synthetic organic chemistry and yet relatively little attention has been paid to the intrinsic reactivity of these low temperature molten salts. Clues to the non-innocent nature of many ionic liquids are contained in the reports of altered reactivity of dissolved substrates, unexpected catalytic activity and unforeseen by-product formation. In this review, we focus on the reactivity of ionic liquids, as opposed to reactivity in ionic liquids (although discussion of the latter is often included where it aids understanding of the former).     

OPTIMIZATION OF THE SYNTHESIS OF ACRYLAMIDE HYDROGEL BY γ-RAY IRRADIATION

Hydrogels have been synthesized from 10%, 20%, 30%, 40%, 50% and 60% aqueous solutions of acrylamide monomer by gamma radiation employing doses in the range of 0.2-30 kGy from a Co-60 source. The effect of solution concentration, y-ray dose, pH and time was studied in order to observe the optimizing conditions in the characterization of hydrogels. Gel fraction increases with dose for all concentrations indicating hundred-percentage conversion of gel at doses ≥5 kGy for homogenous solutions in the range of 20%-50% concentration. On the other hand, 10% solution provides conversion less than 86% even at 30 kGy, whereas 60% monomer makes an inhomogeneous solution which stile gives about 100% gel fraction. Swelling of hydrogels under water with respect to time varies with both the doses and concentrations due to the change of crosslinking density in the gels. The maximum volume change of hydrogels during swelling and water desorption mainly occurs within 24 h. Swelling is also enhanced with the rise of pH due to change of ionic content of the solvent. Considering the amount of gel fraction and the properties of hydrogel, the samples prepared from 20% solution at 5 kGy show better results. Moreover, the effect of bacteria on hydrogel was found to be nil, suggesting a prohibition of growth of microorganism in it.     

Liquid-liquid extraction of ferric thiocyanate with hexamethyl phosphoramide: Direct spectrophotometric determination in the organic phase

Summary Application of hexamethylphosphoramide (HMPA) in the iron(III)-thiocyanate system gives a simple, sensitive and highly selective method for the spectrophotometric determination of Fe(III) in the organic phase (CHCl₃). The color is stable for more than 24 hours in CHCl₃. The system obeys Beer's law for 7g Fe/ml and the optimum concentration range is found to be 0.5–5g/ml. The molar absorptivity of 1.33×10⁴ l·mole^–1·cm^–1, and Sandell's sensitivity is 0.0044/cm² at 460 nm The composition of Fe(III) to thiocyanate is found to be 13 in the presence of HMPA in CHCl₃. The method is free from interferences of many anions and cations. The method has been used to determine iron in bauxite ore.

---

Flüssig-flüssig-Extraktion von Eisenrhodanid nach Zusatz von Hexatnethyl-pbosphoramid: Direkte spektrophotometrische Bestimmung in der organischen Phase

Zusammenfassung Der Zusatz von Hexamethylphosphoramid (HMPA) zu Eisen(III)-Thiocyanat führt zu einer einfachen, empfindlichen und sehr selektiven Methode der spektrophotometrischen Bestimmung von Fe(III) in organischer Phase (CHCl₃). Die Farbe bleibt in Chloroform mehr als 24 Stunden beständig. Das System entspricht dem Beerschen Gesetz unterhalb 7g Fe/ml. Das Konzentrationsoptimum liegt zwischen 0,5 und 5g/ml. Die molare Extinktion beträgt 1,33·10⁴ l·Mol^–1·cm^–1, die Empfindlichkeit nach Sandell 0,0044g/cm² bei 460 nm. Das Verhältnis Fe(III): Rhodanid in CHCl₃ ist 13 in Gegenwart von HMPA. Die Methode wird von vielen Anionen und Kationen nicht gestört. Sie wurde zur Bestimmung von Eisen in Bauxit verwendet.

     

Red to blue tunable upconversion in Tm3+-doped ZrO2 nanocrystals

The effect of dopant concentration on the blue upconversion (UPC) emission of Tm(3+) -doped ZrO(2) nanocrystals under different excitation wavelengths in the red region is reported. The UPC emissions are due to the f-f electronic transitions from excited states (1)G(4) and (1)D(2) of Tm(3+). We observed a chromatic change in the UPC with tuning the excitation wavelength. The UPC emission bands at 475, 488, and 501 nm are observed under excitation at 649 nm, but bands centered at 454 and 460 nm are observed when the excitation wavelength is tuned to 655 nm. The UPC emission could be tuned from 501 to 454 nm ( approximately 47 nm) by changing the excitation wavelength from 649 to 655 nm ( approximately 6 nm). The pump power dependence of the emission bands at 475, 488, and 501 nm were investigated on excitation intensity at 649 nm, and the emission bands at 454 and 460 nm are investigated on excitation intensity at 655 nm, which confirms that all of these UPC emission lines are a two-photon absorption process.     

Removal of dyes from water by conducting polymeric adsorbent

Chemically synthesized conducting polyaniline (PANI) was investigated as adsorbent for its possible application in the removal of organic dyes, such as methylene blue (MB) and procion red (PR) from their aqueous solution. PANI adsorbent behaves as a charged surface upon post‐synthesis treatment of the polymer with acid and base. The adsorbent thus treated shows a high selectivity for the removal of dyes in the adsorption process. The Langmuir adsorption isotherm was used to represent the experimental adsorption data. The cationic dye, MB can be preferentially removed by the base‐treated PANI while the anionic dye, PR is predominately removed by the acid‐treated one. These observations were further evidenced from the measurements of molar conductance and pH of the dye solutions employed for adsorption. The finding can be explained considering the electrostatic nature of adsorption coupled with the morphology of the PANI surface thus treated. Copyright © 2004 John Wiley & Sons, Ltd.     

Studies on the synthesis, characterization, binding with DNA and activities of two cis-planaramineplatinum(II) complexes of the form: cis-PtL(NH3)Cl2 where L = 3-hydroxypyridine and 2,3-diaminopyridine

Background  

Cis-planaramineplatinum(II) complexes like their trans isomers are often found to be active against cancer cell lines. The present study deals with the synthesis, characterization and determination of activity of new cis-planaramineplatinum(II) complexes.