1-丁基-3-甲基咪唑硫酸氢盐离子液体与含氮化合物相互作用的理论研究

采用密度泛函理论方法研究了1-丁基-3-甲基咪唑硫酸氢盐离子液体[Bmim]HSO_4与氮化物喹啉和吲哚分子的相互作用,并进行了NBO和AIM分析。[Bmim]HSO_4离子对最稳定结构表明,[HSO_4]~-阴离子中的氧原子与咪唑环中正电性较大的C14-H20之间有较强的氢键作用。在分子水平上,NBO和AIM分析证实了喹啉和吲哚分子与[Bmim]HSO_4的阴离子之间有较强的相互作用,其中,喹啉分子中的氮原子与阴离子[HSO_4]~-中氢原子之间的作用以及吲哚分子中N-H的氢原子与[HSO_4]~-中氧原子之间的作用是该离子液体能够有效脱除氮化物的主要动力。     

聚酰亚胺/二氧化硅/银杂化薄膜的制备及其结构与性能研究

采用溶胶-凝胶和原位自金属化相结合方法制备聚酰亚胺(PI)/二氧化硅(SiO2)/银(Ag)三元复合薄膜,通过红外(FTIR)、透射电镜(TEM)、动态粘弹谱仪(DMTA)等系统地考察了热处理过程中杂化薄膜结构形态变化以及SiO2含量对金属银向基体表面迁移情况和杂化薄膜各种性能的影响.实验结果表明,在热处理过程中可以同时完成聚酰胺酸的亚胺化、SiO2粒子的形成及银的还原,并且可以通过改变热处理温度和时间或改变SiO2含量来控制银粒子向聚合物基体表面的迁移.     

水稻中丁草胺残留量的气相色谱分析

本文介绍了丁草胺在水稻中(包括糙米、谷糠和稻草)残留量的分析方法。样品中残留的丁草胺可分别用纯石油醚或丙酮/石油醚混合溶剂提取,经柱色谱预净化,由GC-ECD检测定量。糙米、谷糠和稻草样丁草胺的最低检测浓度分别为3 ppb、6 ppb和6 ppb。丁草胺在0.31 ppm、0.62ppm及1.24ppm标准液添加浓度下,糙米中回收率(X±Sx%)分别为89.5±1.8%、90.3±4.2%和92.4±2.1%,谷糠中回收率分别为80.8±1.9%、81.2±3.4%和87.4±6.1%;稻草样回收率分别为85.0±4.2%、84.3±4.5%和90.4±6.8%。     

煤烟对食物、饮水氟污染的研究

测定了云南滇东“燃煤污染型”氟病区新、陈玉米(皮、饭)、饮用水(自然井水、泉水、室内缸水、开水)的含氟量，并对玉米、豆娄、辣椒进行水洗脱氟试验，结果证明由于用煤方式不当，造成室内食物、饮水的污染，发生氟中毒。     

Relative Length of Longest Paths and Cycles in Graphs

For a graph G, let diff(G) = p(G) − c(G), where p(G) and c(G) denote the orders of a longest path and a longest cycle in G, respectively. Let G be a 3-connected graph of order n. In the paper, we give a best-possible lower bound to σ₄(G) to assure diff(G) ≤ 1. The result settles a conjecture in J. Graph Theory 37 (2001), 137–156.     

Hydrogen bond effect of azido polyurethane elastomer by dynamic mechanical analysis

Hydrogen bond effects in azido polyurethane elastomers (APUE) have been studied by dynamic mechanical analysis (DMA) and the results show that the hydrogen bond effect has stronger temperature dependence. The activation energy of hydrogen bond dissociation (E_a) and the hydrogen bond density (vs/V) have been evaluated from the elastic modulus–temperature relationship. The calculated E_a in this work is much higher than the reported values of normal polyurethane elastomer (PUE). The values of E_a are 81.3, 68.1, 53.3, and 42.3 kJ/mol at 150, 110, 50, and 20 Hz, respectively, for PUE‐1 (CPPB/HDI trimer elastomer); 94.6, 75.8, 48.4, and 36.9 kJ/mol at 150, 110, 50, and 20 Hz, respectively, for PUE‐2 (APPB/HDI trimer elastomer); 82.1, 74.4, 59.8, and 46.5 kJ/mol at 150, 110, 50, and 20 Hz, respectively, for PUE‐3 (APPB/HDI trimer/EG elastomer); 145, 124, 88.0, and 75.5 kJ/mol at 150, 110, 50, and 20 Hz, respectively, for PUE‐4 (APPB/HDI trimer/BD elastomer); and 72.2, 64.3, 49.8, and 39.9 KJ/mol at 150, 110, 50, and 20 Hz, respectively, for PUE‐5 (APPB/HDI trimer/HD elastomer). The DMA estimations are semiquantitative for it ignores other physical crosslinking effects and the results give relative order of vs/V and E_a. The values of vs/V of crosslinked APUE (PUE‐3, PUE‐4, and PUE‐5) are much higher than PUE‐2. The test frequency could affect the values of vs/V and higher frequency would minify the difference of the values of vs/V for two given temperatures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2841–2851, 2006     

动生电动势与感生电动势的统一

利用相对论质能关系、不同参考系中电磁场的变换关系和牛顿第二定律,先研究了一般的电源电动势在不同参考系之间的变换,再推导出相对论中的感生电动势和动生电动势公式,从而使它们达到了定量的统一.     

The (conditional) matching preclusion for burnt pancake graphs

The matching preclusion number of a graph is the minimum number of edges whose deletion results in a graph that has neither perfect matchings nor almost-perfect matchings, and the conditional matching preclusion number of a graph is the minimum number of edges whose deletion leaves a resulting graph with no isolated vertices that has neither perfect matchings nor almost perfect matchings. In this paper, we find these two numbers for the burnt pancake graphs and show that every optimal (conditional) matching preclusion set is trivial.