Tuning the hemilabile behaviour of a thioether–pyrazole ligand on Pd(II) complexes with diphosphines

The coordination mode of thioether–pyrazole ligand, 1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane (bdtp) and 1,8-bis-(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo) ligands, in Pd(II) complexes containing a diphosphine ligand is determined by subtle changes in size of the bridge between the two phosphorus atoms. The ¹H NMR and ³¹P{¹H} NMR at variable temperature in acetonitrile solution prove that the hemilabile character of the bdtp ligand depend on the diphosphine ligand. Thus, while in [Pd(bdtp)(dppe)](BF₄)₂ [1](BF₄)₂ the thioether group not participate in the Pd(II) coordination sphere, two isomers with different coordination (P₂N₂ vs P₂NS) are in equilibrium in [Pd(bdtp)(dppp)](BF₄)₂ [2](BF₄)₂ acetonitrile solution. For complexes [Pd(bddo)(dppe)](BF₄)₂ [3](BF₄)₂ and [Pd(bddo)(dppp)](BF₄)₂ [4](BF₄)₂, only the coordination N,N is observed.     

Headspace solid-phase microextraction-gas chromatography-mass spectrometry applied to quality control in multilayer-packaging manufacture

A method based on headspace solid-phase microextraction-gas chromatography-mass spectrometry is proposed for the quality control of multilayer packaging and its manufacturing process. Volatile organic compounds (VOCs) are produced in the manufacturing process of the packaging. They can cause organoleptic problems or modify the properties of the packaging depending on the nature and the amount of the VOCs formed. The quantification using packaging samples with a known VOC concentration for the calibration is proposed in order to reduce the analysis time, and the method is validated using a statistical test. Finally, the method is applied to the determination of odour-responsible compounds in multilayer packaging samples obtained under different extrusion-coating conditions, i.e. type of extruder, type of polymer and extrusion speed.     

Mass spectrometry detection of minor new meridianins from the antarctic colonial ascidians Aplidium falklandicum and Aplidium meridianum

Taking into account the broad biological activities found in the meridianin indole alkaloids isolated to date, we have re‐examined the organic extracts of an Antarctic collection of the tunicates Aplidium meridianum and A. falklandicum (Chordata: Ascidiacea) by HPLC in conjunction with a high‐resolution mass spectrometer (HPLC‐MS). A new set of analogs of meridianins A–G has been detected, and their structures are proposed on the basis of the molecular formulae identified by LC‐HRMS analysis using a C18 column with a gradient of water/acetonitrile and an LTQ‐FT‐MS Orbitrap detector. Remarkably, dimers derived from meridianin A and from meridianin B or E were also detected. Our findings provide further evidence of the broad variability within the meridianin‐like derivatives of this highly bioactive alkaloid family. Copyright © 2015 John Wiley & Sons, Ltd.     

Sigma-borane complexes of iridium: synthesis and structural characterization

Reaction of NaBH4 with (tBuPOCOP)IrHCl affords the previously reported complex (tBuPOCOP)IrH2(BH3) (1) (tBuPOCOP = kappa(3)-C6H3-1,3-[OP(tBu)2]2). The structure of 1 determined from neutron diffraction data contains a B-H sigma-bond to iridium with an elongated B-H bond distance of 1.45(5) A. Compound 1 crystallizes in the space group P1 (Z = 2) with a = 8.262 (5) A, b = 12.264 (5) A, c = 13.394 (4) A, and V = 1256.2 (1) A(3) (30 K). Complex 1 can also be prepared by reaction of BH3 x THF with (tBuPOCOP)IrH2. Reaction of (tBuPOCOP)IrH2 with pinacol borane gave initially complex 2, which is assigned a structure analogous to that of 1 based on spectroscopic measurements. Complex 2 evolves H2 at room temperature leading to the borane complex 3, which is formed cleanly when 2 is subjected to dynamic vacuum. The structure of 3 has been determined by X-ray diffraction and consists of the (tBuPOCOP)Ir core with a sigma-bound pinacol borane ligand in an approximately square planar complex. Compound 3 crystallizes in the space group C2/c (Z = 4) with a = 41.2238 (2) A, b = 11.1233 (2) A, c = 14.6122 (3) A, and V = 6700.21 (19) A(3) (130 K). Reaction of (tBuPOCOP)IrH2 with 9-borobicyclononane (9-BBN) affords complex 4. Complex 4 displays (1)H NMR resonances analogous to 1 and exists in equilibrium with (tBuPOCOP)IrH2 in THF solutions.     

Analysis of high molecular mass proteins larger than 150 kDa using cyanogen bromide cleavage and conventional 2-DE

Proteomic approaches including high-resolution 2-DE are providing the tools needed to discover disease-associated biomarkers in complex biological samples. Although 2-DE is an extremely powerful approach to analyze the proteome, the separation of proteins with extreme molecular masses still remains an issue requiring improvement. Because high molecular mass (HMM) proteins larger than 150 kDa have already been observed to be differentially expressed in several pathologies such as cancer, we developed an original strategy to analyze this part of the proteome that is not easily separated by 2-DE in polyacrylamide gels. This strategy is based on the 2-DE separation of cyanogen bromide (CNBr) fragments of purified HMM protein fractions, and combines techniques including SEC fractionation, TCA precipitation, CNBr cleavage, 2-DE and MS analysis. The method was first tested on a model protein, the BSA. Preliminary results obtained using colonic tissues led to the identification of six HMM proteins with M(r) comprised between 163 and 533 kDa in their reduced state. These results demonstrated that our CNBr/2-DE approach should provide a powerful tool for identification of new biomarkers larger than 150 kDa.     

Multi-pumping flow system for the determination of dissolved orthophosphate and dissolved organic phosphorus in wastewater samples

A multi-pumping flow system (MPFS) for the spectrophotometric determination of dissolved orthophosphate and dissolved organic phosphorus in wastewater samples is proposed. The determination of orthophosphate is based on the vanadomolybdate method. In-line ultraviolet photo-oxidation is employed to mineralise organic phosphorus to orthophosphate prior to detection. A solenoid valve allows the deviation of the flow towards the UV-lamp to carry out the determination of organic phosphorus.Calibration was found to be linear up to 20 mg P L⁻¹, with a detection limit (3s_b/S) of 0.08 mg P L⁻¹, an injection throughput of 75 injections h⁻¹ and a repeatability (R.S.D.) of 0.6% for the direct determination of orthophosphate. On the other hand, calibration graphs were linear up to 40 mg P L⁻¹, with a detection limit (3s_b/S) of 0.5 mg P L⁻¹, an injection throughput of 11 injections h⁻¹ and a repeatability (R.S.D.) inferior to 2.3% for the procedures involving UV photo-oxidation.     

Correlation of the EPR properties of perchlorotriphenylmethyl radicals and their efficiency as DNP polarizers

Water soluble perchlorinated trityl (PTM) radicals were found to be effective 95 GHz DNP (dynamic nuclear polarization) polarizers in ex situ (dissolution) (13)C DNP (Gabellieri et al., Angew Chem., Int. Ed. 2010, 49, 3360). The degree of the nuclear polarization obtained was reported to be dependent on the position of the chlorine substituents on the trityl skeleton. In addition, on the basis of the DNP frequency sweeps it was suggested that the (13)C NMR signal enhancement is mediated by the Cl nuclei. To understand the DNP mechanism of the PTM radicals we have explored the 95 GHz EPR characteristics of these radicals that are relevant to their performance as DNP polarizers. The EPR spectra of the radicals revealed axially symmetric g-tensors. A comparison of the spectra with the (13)C DNP frequency sweeps showed that although the solid effect mechanism is operational the DNP frequency sweeps reveal some extra width suggesting that contributions from EPR forbidden transitions involving (35,37)Cl nuclear flips are likely. This was substantiated experimentally by ELDOR (electron-electron double resonance) detected NMR measurements, which map the EPR forbidden transitions, and ELDOR experiments that follow the depolarization of the electron spin upon irradiation of the forbidden EPR transitions. DFT (density functional theory) calculations helped to assign the observed transitions and provided the relevant spin Hamiltonian parameters. These results show that the (35,37)Cl hyperfine and nuclear quadrupolar interactions cause a considerable nuclear state mixing at 95 GHz thus facilitating the polarization of the Cl nuclei upon microwave irradiation. Overlap of Cl nuclear frequencies and the (13)C Larmor frequency further facilitates the polarization of the (13)C nuclei by spin diffusion. Calculation of the (13)C DNP frequency sweep based on the Cl nuclear polarization showed that it does lead to an increase in the width of the spectra, improving the agreement with the experimental sweeps, thus supporting the existence of a new heteronuclear assisted DNP mechanism.     

Development of hybrid elution systems for efficient purification of stilbenoids using centrifugal partition chromatography coupled to mass spectrometry

The phytochemical study of the root extract of the stilbenoid-rich Vitis riparia × Vitis berlandieri grapevine was carried out by centrifugal partition chromatography (CPC). For this reason, we developed a new elution mode we named back-step, which allowed us to obtain cleaner fractions and a more efficient separation process when used in conjunction with a classical elution approach. Three hydroxystilbenes: (E)-resveratrol, (E)-?-viniferin and (E)-vitisin C, with greater than 90% purity were thus obtained through such process, with minimal sample handling and purification steps. Online coupling of CPC to ESI mass spectrometry was used for optimization of the separation parameters and to facilitate the characterization of the stilbenoids. This study details the first phytochemical investigation of stilbenoids from the hybrid species together with a new elution mode able to widen the range of ARIZONA biphasic systems.     

Nanoscale characterization of different stiction mechanisms in electrostatically driven MEMS devices based on adhesion and friction measurements

In this work, for the first time different stiction mechanisms in electrostatic micro-electromechanical systems (MEMS) switches were studied. In these devices stiction can be caused by two main mechanisms: dielectric charging and meniscus formation resulting from the adsorbed water film between the switch bridge and the dielectric layer. The effect of each mechanism and their interaction were investigated by measuring the adhesive and friction forces under different electrical stress conditions and relative humidity levels. An atomic force microscope (AFM) was used to perform force-distance and friction measurements on the nanoscale. A novel technique was proposed to measure the induced surface potential over the dielectric surface and was used to explain the obtained adhesive and friction results. The evolution of adhesive force with time was monitored in order to study the charging/discharging processes in the dielectric film. The assessment methodology is employed for application in RF-MEMS switches and could be extended to other electrostatic MEMS devices. The study provides an in-depth understanding of different stiction mechanisms, and explanation for the literature reported device level measurements for electrostatic capacitive MEMS switches.     

New C2-Chiral Bidentate Ligands Bridging the gap between donor phosphine and acceptor carbonyl ligands

Two new C₂ chiral bidentate phosphorous ligands have been prepared in enantiomerically pure form. The two phosphorous centers bear electron-withdrawing groups ((CF₃)₂CH? O, C₆F₅) and are linked by a trans-cyclopentane-1,2-diol-derived bridge. Photolysis of [Cr(η⁶-C₆H₆)(CO)₃] in the presence of these two new ligands and of two previously reported bidentate phosphites, and fluorophosphinites (L) afforded [Cr(η⁶-C₆H₆)(CO)L] complexes. IR Spectral comparison of the complexes shows the new ligands to be intermediate in their bonding properties between alkyl phosphites and CO.