The elimination of fast variables in complex chemical reactions. III. Mesoscopic level (irreducible case)

The master equation for a complex chemical reaction cannot always be reduced to a simpler master equation, even if there are fast and slow individual reaction steps. Nevertheless the elimination of intermediates can be carried out with the help of the-expansion. This is illustrated with a well-known complex reaction: the dissociation of N₂O₅. It is shown that the intrinsic fluctuations in the N₂O₅ decay are larger than those implied by the master equation suggested by the macroscopic rate law.     

The effects of the column pressure drop on retention and efficiency in packed and open tubular supercritical fluid chromatography

The effects of the pressure drop across the column on retention and efficiency in SFC have been studied. Numerical methods are described which enable the prediction of hold-up time and pressure drop in both packed and open tubular columns. Predictions of both hold-up time and pressure drop are in good agreement with experimental data. The density gradient along the column can be calculated using the numerical methods and a procedure is described which enables the calculation of the overall capacity factors of the solutes from the density profile in the column. Significant variations of the capacity factor are observed along the column. The effect of the density gradient along the column on local diffusivity and dispersion is studied. The column efficiency in systems with significant pressure drops is affected by changes in: the linear velocity of the mobile phase; the diffusion coefficients; and the capacity factors of the solutes along the column. The overall efficiency of the chromatographic system can be calculated if, as is the case for open tubular columns, adequate plate height equations are available.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

Development and validation of an analytical method for detection of estrogens in water

An analytical procedure enabling routine analysis of four environmental estrogens at concentrations below 1 ng L^–1 in estuarine water samples has been developed and validated. The method includes extraction of water samples using solid-phase extraction discs and detection by gas chromatography (GC) with tandem mass spectrometry (MS–MS) in electron-impact (EI) mode. The targeted estrogens included 17- and 17-estradiol (aE2, bE2), estrone (E1), and 17-ethinylestradiol (EE2), all known environmental endocrine disruptors. Method performance characteristics, for example trueness, recovery, calibration, precision, accuracy, limit of quantification (LOQ), and the stability of the compounds are presented for each of the selected estrogens. Application of the procedure to water samples from the Scheldt estuary (Belgium – The Netherlands), a polluted estuary with reported incidences of environmental endocrine disruption, revealed that E1 was detected most frequently at concentrations up to 7 ng L^–1. aE2 was detected once only and concentrations of bE2 and EE2 were below the LOQ.Presented at the 9th FECS Conference on Chemistry and the Environment, Bordeaux, France, 29 August–1 September 2004     

Ferromagnetic spin alignment in head-to-tail coupled oligo(1, 4-phenyleneethynylene)s and Oligo(1,4-phenylenevinylene)s bearing pendant p-phenylenediamine radical cations

The intramolecular and long-range ferromagnetic coupling between p-phenylenediamine radical cations in head-to-tail coupled oligo(1, 4-phenyleneethynylene)s and oligo(1,4-phenylenvinylene)s between neighbors and next-nearest neighbors is described. UV/vis/near-IR experiments show that the radical cations are localized in the pendant p-phenylenediamine units of the conjugated oligomers. The ESR spectra of these oligo(1,4-phenyleneethynylene) and oligo(1, 4-phenylenvinylene) di(radical cation)s are consistent with those of a triplet state. A linear behavior is observed for the doubly integrated ESR intensity of the DeltaM(s) = +/-1 and DeltaM(s) = +/-2 signals with the inverse temperature (I approximately 1/T), consistent with Curie's law. This behavior indicates a triplet ground-state diradical with a large triplet-singlet energy gap or possibly a degeneracy of singlet and triplet states.     

Supercritical fluid extraction-capillary gas chromatography: On-line coupling with a programmed temperature vaporizer

A simple and versatile system is described for the on-line coupling of SFE to capillary GC. The interfacing consists of a programmed temperature vaporizer (PTV) injector. With this injector it is possible to combine solute trapping, elimination of a high flow of extraction fluid, and quantitative transfer of solutes to the seperation column. The problems caused by impurities in the extraction fluid in on-line SFE-GC are discussed. Simple methods are described for the purification of commercially available carbon dioxide. The trapping efficiency of the PTV injector is studied. Applications of the SFE-PTV-GC system are given for the analysis of polymer anti-degradants, polar compounds, and samples with environmental relevance.     

The determination of ammonia in flue gas from the selective catalytic reduction of nitric oxide with ammonia

The emission of NO_x from coal-fired boilers can be limited by means of the selective catalytic reduction of NO_x with ammonia. The amounts of unreacted ammonia downstream should be low to avoid processing and environmental problems. Continuous measurement of the ammonia in the flue gas is needed. The determination of ammonia and flue gas sampling techniques are discussed. Measurements of ammonia in exhausts of a laboratory reactor and of a pilot plant for the selective catalytic reduction of NO_x with ammonia are presented. Ammonia was determined by mass spectrometry and chemiluminescence in the gas phase, and by spectrophotometric (Nessler and Berthollet reactions) or potentiometry in aqueous solution, in low (<5 μl l^?1) and high (<1000 μl l^?1) concentration ranges.