Micro-structural characterization of black crust and laser cleaning of building stones by micro-Raman and SEM techniques

Research concerning the formation and removal of black crusts on various historical objects is approached from many different angles. The so-called "yellowing effect", observed after laser treatment for cleaning purposes, has also received a lot of attention. Evidence regarding this phenomenon differs considerably and the actual mechanisms are still speculated on by researchers. In an attempt to elucidate the processes involved in the yellowing effect associated with laser cleaning, a new analytical technique has been used to investigate the black crust, a region of the sample cleaned by laser irradiation at 1064 nm and another region of the same sample subjected to further laser irradiation at 355 nm, on a limestone sample from the cathedral of Seville in Spain. Micro-Raman spectrometry offers the advantage of spatial chemical characterization of the stone, based upon its molecular makeup and was performed on the bulk body of the stone. Raman and scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDXS) results indicate that the surfaces cleaned by irradiation at 1064 nm and by double irradiation at 1064 and 355 nm differed in terms of their calcium sulphate, calcium oxalate and iron oxide content, and that this could contribute to the difference in colour observed.     

Thermogravimetric study of polyacrylamide with evolved gas analysis

Dried samples of polyacrylamide in an He atmosphere have been subjected to thermogravimetric analysis in the 30–600°C range, and the evolved gases were monitored by FTIR. Water, ammonia, and small quantities of carbon dioxide are released in the first stages of decomposition (220–340°C), where the polymer chains remain intact and the reaction occurs on the pendant amide groups. In the second stage of decomposition (340–440°C), the majority of the weight loss occurs, and main chain breakdown occurs, releasing carbon dioxide, water, nitrile compounds, and imides. Trapping of the gases in this stage and analysis by GC–FTIR and GC–MS reveals the presence of more than 20 decomposition products, and confirms that a large proportion of these can be assigned to glutarimide and its substituted analogs. Imidization and dehydration reactions on the amide groups, as well as free radical breakdown of the main chains, with inter- and intramolecular hydrogen transfer, can account for many of the products of the decomposition. © 1993 John Wiley & Sons, Inc.     

The non-linear dielectric effect in liquid xenon

The non-linear dielectric effect (NLDE), that is the increase in the dielectric constant divided by the square of the applied field, is measured for a number of non-polar molecular liquids and for liquid xenon. The values of the NLDE are compared with results in the literature and with values predicted by theory. The agreement with other experiments is quite good, but with theory is very poor, the only exception being Liquid xenon, where agreement is good. A possible explanation is given. The prediction that the NLDE should increase strongly near the critical point due to the divergence of the isothermal compressibility could not be established by experiment. The conclusion is drawn that this failure is due to the reduction by the theory of second-order effects to first-order thermodynamic and molecular properties.     

The reaction of propane sultone with cuanosine,adenosine, and related compounds

Propane sultone (3-hydroxypropanesulfonic acid-γ-lactone) which is a monofunctional directacting alkylating carcinogen, has been shown to react irreversibly with DNA from various sources in vitro. It reacts with guanosine in DMSO to yield the N-7 alkyl nucleoside, while reaction with 2′-deoxyguanosine yields the corresponding N-7 alkyl purine. Evidence for the structure of these products and of one formed when adenosine and propane sultone react is presented.     

Absorptiometric determination of microgram amounts of uranium with Rhodamine B

Uranium (VI) can be extracted as a complex with rhodamine B into a benzeneetherhexone solvent from a benzoate buffered solution. Optimum conditions for the colour development are defined, leading to a molar absorptivity of 102700 mmol^-1 cm² at 555 nm, the highest yet reported for a uranium complex. The determination of uranium in the range 0.02–3 μg/ml in nitrate samples is described. The relative standard deviation ranges from 20 to 0.6%. The interference of several ions is investigated.     

Conformations of luteoskyrin and rugulosin in solution

The pigments Luteoskyrin (Ls) and Rugulosin (Rg) might adopt a priori two extreme conformations, a planar and an angular one. To determine the predominant conformation in solution, the nature of the lowest energy transition of the chromophores and the presence of intramolecular H-bonding have been investigated. The solvent effects on electronic absorption and CD spectra indicated the π-π* nature of the lowest energy transition. Treatments of the electronic absorption results according to McRae and Kosower relations, IR absorption and PMR spectra suggested the presence of strong intra-molecular H-bonds. From these results it was concluded that Ls and Rg adopted in a variety of solvents the most planar conformation.     

International Measurement Evaluation Programme: IMEP-9, trace elements in water

The International Measurement Evaluation Programme (IMEP) is an interlaboratory comparison scheme, founded, owned and coordinated by the Institute for Reference Materials and Measurements (IRMM) since 1988. IMEP-9 is the third round of trace elements in water evaluation following IMEP-3 and IMEP-6. Reference values for 15 elements stating total concentrations and combined uncertainties (according to GUM) were established. The reference values were established mainly by isotope dilution mass spectrometry (IDMS) as a primary method of measurement, and values traceable to the SI were obtained. The four elements that could not be certified by IDMS were assigned values by means of other measurement techniques. Results from 201 laboratories from 35 countries and four continents were evaluated against the reference values and the comparability between the laboratories is presented graphically.     

Influence of the coordination number of nitrogen on the structure of 6aλ4-thia-1,3,4,6-tetraazapentalenic systems. Crystal structure analyses of 3-(2-pyridylimino)-3H-[1,2,4]thiadiazolo[4,3-a]pyridine and its 1-methylated salt

Structural data were obtained by X-ray crystallography for the title compounds which show that they are essentially planar and exhibit an approximately linear N2-S1-N8 arrangement. In compound 3 the separation between the sulfur atom and the pyridine nitrogen atom (2.61 Å) is larger than the Huggins constant energy distance (2.58 Å), suggesting that there is little or no bonding between them. The methylated salt 4 , on the contrary, has a closer S…N(pyridine) distance (2.19 Å) with an estimated bond dissociation energy of 6 kcal/mole.     

SCF,MP2, and CEPA-1 calculations on the OH ‥ O hydrogen bonded complexes (H2O)2 and (H2O-H2CO)

Counterpoise corrected ab initio calculations are reported for (H₂O)₂ and H₂O-H₂CO. Geometry searches were done in the moment-optimized basis DZP' at the SCF, MP2, and CEPA-1 levels of theory, followed by more accurate single-point calculations in basis ESPB, which includes bondfunctions to saturate the dispersion energy. The final equilibrium binding energies obtained are ?4.7 ±0.3 kcal/mol for a near-linear (H₂O)₂ structure and ?4.6 ±0.3 kcal/mol for a strongly bent HOH ‥ OCH₂ structure. The energy difference between these systems is much smaller than in all previous ab initio work. Cyclic (C_2h) and bifurcated (C_2v) transition structures for (H₂O)₂ are located at 1.0 ±0.1 kcal/mol and 1.9 ±0.3 kcal/mol above the global minimum, respectively. A new partitioning scheme is presented that rigorously partitions the MP2 correlation interaction energy in intra and intermolecular (dispersion) contributions. These terms are large (up to 2 kcal/mol) but of opposite sign for most geometries studied and hence their overall effect upon the final structures is relatively small. The relative merits of the MP2 and CEPA-1 approaches are discussed are discussed and it is concluded that for economical reasons MP2 is to be preferred, especially for larger systems.     

Development and validation of an analytical method for detection of estrogens in water

An analytical procedure enabling routine analysis of four environmental estrogens at concentrations below 1 ng L^–1 in estuarine water samples has been developed and validated. The method includes extraction of water samples using solid-phase extraction discs and detection by gas chromatography (GC) with tandem mass spectrometry (MS–MS) in electron-impact (EI) mode. The targeted estrogens included 17- and 17-estradiol (aE2, bE2), estrone (E1), and 17-ethinylestradiol (EE2), all known environmental endocrine disruptors. Method performance characteristics, for example trueness, recovery, calibration, precision, accuracy, limit of quantification (LOQ), and the stability of the compounds are presented for each of the selected estrogens. Application of the procedure to water samples from the Scheldt estuary (Belgium – The Netherlands), a polluted estuary with reported incidences of environmental endocrine disruption, revealed that E1 was detected most frequently at concentrations up to 7 ng L^–1. aE2 was detected once only and concentrations of bE2 and EE2 were below the LOQ.Presented at the 9th FECS Conference on Chemistry and the Environment, Bordeaux, France, 29 August–1 September 2004