Encryption and decryption using a sandwich phase diffuser made by using two speckle patterns and placed in the Fourier plane: Simulation results

In the present paper, we describe the encryption and decryption of two-dimensional images. The encryption is done by employing a sandwich phase diffuser made by using two elongated speckle patterns, and placed in the Fourier plane of a double random phase encoding system. After encryption, the two constituent phase diffusers of such a sandwich diffuser are separated. During decryption, if the conjugate of either of the two elongated phase speckle patterns is used, the image cannot be retrieved. Correct decryption is also not possible if a sandwich diffuser with any of the phase speckle patterns is shifted in position with respect to the other. For decryption, the encrypted image is Fourier transformed and multiplied by the conjugate of the sandwich diffuser, and then the product is further Fourier transformed. It is possible to generate the image only if both the elongated phase speckle patterns are matched point-to-point and then the proper conjugate is made. The use of elongated speckle patterns in constituting a sandwich phase diffuser makes the system less complicated as compared to the use of a sandwich diffuser made with normal speckle patterns, enabling an easy alignment of the random phase diffuser at the time of rejoining the constituent diffusers for making the right key. The ease of alignment is due to the reduction of the requirement of 360° scanning at the time of rejoining these diffusers with little reduction in the security of the system. Simulation results are presented in support of the proposed idea. For optical implementation, the decrypted image may be obtained by generating a phase conjugate wave by the phase conjugation technique, and passing through the same sandwich phase diffuser. To evaluate the reliability of the technique, mean square error (MSE) between the decrypted and original image has been calculated.     

Study of structure and optical luminescence of C+6 (80 MeV) ion irradiated CdS: Fe system

Iron doped CdS nanocrystals have been synthesized by using aqueous solution precipitation method. Samples of CdS:Fe have been subjected to irradiation using C⁺⁶ (80 MeV) under of 1×10¹³ ions/cm². For characterization, X-ray diffraction (XRD), Photoluminescence (PL) and Optical absorption studies have been performed. The system has been found in hexagonal phase having particle size distribution 18–20 nm. Photoluminescence intensity has been found to decrease, while optical band gap has been found to increase in irradiated samples.     

Heat and mass transfer on unsteady three-dimensional convective MHD flow past a porous plate moving in a parallel free stream

The unsteady three-dimensional convective flow of a viscous incompressible, electrically conducting fluid over a vertical, insulated, porous surface moving in a parallel free stream has been investigated, which flows belong to a separate class of problem of boundary layer theory. The effects of heat and mass transfer on this unsteady laminar flow past porous surface with transverse sinusoidal suction and oscillatory wall temperature have been analysed and discussed.     

Stopping power contribution due to target and projectile excitation/ionization: a comparative study

A comparative study of stopping power codes for different ions in compounds has been made by comparing the computed stopping power values using different codes with the corresponding experimental data. Two computer codes, semiempirical SRIM2006.02 and theoretical CasP3.2 have been used to evaluate and compare the stopping powers of different compounds for protons (125 KeV), helium (500 KeV) and lithium ion (175 KeV) projectiles. The energy behaviour of stopping power of various compounds for helium ion in the energy range (0.3–2.0 MeV) has been studied. The merits and demerits of the adopted formulations are highlighted. It has been observed that the calculation based on SRIM2006.02 provides the best agreement with the experimental data as compared to CasP3.2 code. The stopping power contribution due to target and projectile excitation/ionization at low energies has been evaluated and discussed with reference to CasP3.2 code. From these comparative studies it has been concluded that the target and projectile excitation-ionization increases the stopping power (>20%) at lower energies.     

Study of gain dynamics and temporal jitter effects in copper vapor laser oscillator-amplifier chain

Effect of temporal jitter on the performance of copper vapor laser (CVL) master oscillator power amplifier (MOPA) chain using Monte-Carlo techniques was studied. The MOPA chain comprised an oscillator and five amplification stages. Amplification of CVL signal in each amplifier stage was modeled using rate equation based optical model. The effect of temporal jitter on the pulse energy stability in CVL MOPA chain was estimated for various jitter values. Our studies show that the pulse energy spread and the pulse energy instability increases with increase in jitter which in turn depends on the gain pulse width and the jitter considered. Pulse to pulse gain variation in CVL MOPA chain was studied along with temporal jitter. The acceptable tolerance limit on temporal jitter is ±4 ns for a pulse energy stability of 5% of CVL MOPA chain.     

Spectroscopic study of sulforhodamine 640-doped sol-gel silica

The sol-gel process is a technique which provides a low-temperature route for the preparation of organic dye-doped porous silica glass. Extended UV transmission was observed for HCl-catalysed sol-gel silica. Properties of a solute may differ greatly between a free solution and that solution confined in pores of a sol-gel glass. Absorption and fluorescence properties of sulforhodamine 640-doped silica samples prepared by sol-gel process were investigated. In the TEOS-derived gel, the emission of the dye does not shift during aging but exhibits a large change during drying. The emission maximum of sulforhodamine 640 blue shifts was discussed as a function of increasing rigidity of the surrounding matrix.     

String behaviour of magnetic field lines and their rotation in neutron star’s interior

It is found from Maxwell’s equations that the magnetic field lines are good analogues of relativistic strings. The Lorentz force per unit length of magnetic tube is interpretable as Magnus force acting on each individual magnetic tube. It is shown that the superconducting current in pulsar’s interior causes local rotation of magnetic flux tubes carrying quantized flux. Such local rotation remains operative as long as the induced magnetic field of normal electron fluid is above the lower critical field but below the upper. The conservation of magnetic flux leads to a geometrical condition in the form of the Weingarten identity which ensures the existence of family of “magnetic world sheetrdquo;. Each “magnetic world sheet” is a magnetic flux conserving surface. In the process of collapse, a compact spacelike cross-section of a magnetic tube terminates into a trapped surface if the magnetic energy grows faster along the fluid flow lines than that along the magnetic field lines.     

Charged fluid distribution in higher dimensional spheroidal space-time

A general solution of Einstein field equations corresponding to a charged fluid distribution on the background of higher dimensional spheroidal space-time is obtained. The solution generates several known solutions for superdense star having spheroidal space-time geometry. Formerly V. Regional College of Engineering     

Optical emission from laser-produced chromium and magnesium plasma under the effect of two sequential laser pulses

Parametric study of optical emission from two successive laser pulses produced chromium and magnesium plasma is presented. The line emission from chromium and magnesium plasma showed an increase by more than six times for double laser pulse excitation than for single-pulse excitation. An optimum increase in emission intensity was noted for inter-pulse delay of ∼2–3 μs for all the elements. The experimental observations were qualitatively explained on the basis of absorption of second laser pulse in the pre-formed (by first laser) coronal plasma by inverse Bremsstrahlung process, which were found responsible for the excitation of more ions and atoms in the plasma. This process starts as the plasma scale length becomes greater than the laser wavelength. This study further indicated the suitability of this technique in the field of elemental analysis     

Effect of distortion on optical-fiber waveguides

We analyze the modes and coupling efficiency of asymmetric optical-fiber waveguides. We treated the step index-asymmetric optical-fiber waveguide as a boundary-value problem and obtain the expressions for the modes under logical assumptions. Using these expressions, we describe the propagation constants, mode delay, and power distribution of two asymmetric optical-fiber waveguides under consideration. Based on the perturbation theory, we also present the coupling coefficients of these asymmetric optical-fiber waveguides. We show that the waveguide parameters are considerably changed in the presence of distortion, and one can tune these parameters at the desired level by choosing suitable distortions.