Use of xenon as a mobile phase for on–line capillary supercritical fluid chromatography–fourier transform infrared spectrometry

Xenon is investigated as a mobile phase for on-line capillary supercritical fluid chromatography-Fourier transform infrared spectrometry (SFC-FTIR). Polycyclic aromatic hydrocarbons, aromatic isocyanates, and epoxy acrylate oligomers are analyzed as examples to show that xenon has similar selectivities and solvating powe to CO₂. Its optical transparency makes it ideal for IR detection. A stop flow system is constructed to increase the sensitivity of spectra measured from compounds which are weak IR absorbers.     

A generic method to detect electrophilic intermediates using isotopic pattern triggered data-dependent high-resolution accurate mass spectrometry

A need still exists for a liquid chromatography/tandem mass spectrometry (LC/MS/MS) method that can detect broad classes of glutathione (GSH) conjugates and provide characterization of their structures. We now describe the development of a method that multiplexes high-resolution accurate mass analysis with isotope pattern triggered data-dependent product ion scans, for simultaneous detection and structural elucidation of GSH conjugates within a single analysis using a LTQ/Orbitrap. This method was initially developed to detect GSH conjugates generated from incubating 10 microM test compound with pooled human liver microsomes fortified with NADPH-regenerating system and a 2:1 ratio of 5 mM glutathione and [(13)C(2) (15)N-Gly]glutathione. The GSH conjugates were detected by isotope search of mass defect filtered and control subtracted full scan accurate MS data using MetWorks software. This was followed by elucidation of reactive intermediate structures using chemical formulae for both protonated molecules and their product ions from accurate masses in a single analysis. The mass accuracies measured for the precursor and product ions by the Orbitrap were <2 ppm in external mass calibration mode. Successful detection and characterization of GSH conjugates of acetaminophen, tienilic acid, clozapine, ticlopidine and mifepristone validated this method. In each case, the detected GSH conjugates were within the top five hits by isotope search. This method also has a broader detection capability since it is independent of the collision-induced dissociation behavior of the GSH conjugates. Furthermore, this method is amenable to a broad class of reactive intermediate trapping agents as exemplified by the simultaneous detection and structural elucidation of the cyano-N-methylene iminium ion conjugates of verapamil and its O-desmethyl metabolites, which we report for the first time. In addition to the chemically tagged reactive intermediates, this method also provides information on stable metabolites from the full scan accurate MS data.     

Intercompany Study to Evaluate the Robustness of Capillary Isoelectric Focusing Technology for the Analysis of Monoclonal Antibodies

Interlaboratory comparisons are essential to bringing emerging technologies into biopharmaceutical industry practice and regulatory acceptance. As a result, an international team including 12 laboratories from 10 independent biopharmaceutical companies in the United States and Switzerland was formed to evaluate the precision and robustness of capillary isoelectric focusing (CIEF) to assess the charge heterogeneity of monoclonal antibodies. The different laboratories determined the apparent pI and the relative distribution of the charge isoforms of a representative monoclonal antibody (rMAb) sample using the same CIEF method. Statistical evaluation of the data was performed to determine within and between-laboratory consistencies and outlying information. The apparent pI data generated for each charge variant peak showed very good precision between laboratories with percentage of RSD values of ??0.5%. Similarly, the percentage of RSD for the rMAb charge variants percent peak area values are ??4.4% across different laboratories with different analysts using different lots of ampholytes and multiple instruments. Taken together, these results validate the appropriate use of CIEF in the biopharmaceutical industry in support of regulatory submissions.     

Micromechanical models of young's modulus of NR/organoclay nanocomposites

Small strain Young's moduli of natural rubber (NR)/organoclay nanocomposites were estimated using the Guth–Gold, Halpin–Tsai (HT), and Krieger–Dougherty (KD) models, and compared with experimental measurements of NR vulcanizates containing organo‐montmorillonite (OM) or organo‐sepiolite (OS). To account for the effect on modulus of the NR matrix of the vulcanization‐active modifier in the organoclay, a matrix modulus correction (MMC) term was derived from the vulcanization parameters of the nanocomposites. The KD model gave a better empirical fit with the experimental data than the Guth–Gold model, with both giving good agreement with particle shape factors estimated from transmission electron microscope (TEM) images. The HT model gave the best fit with experiment for both types of nanocomposite, and use of the MMC term meant that the empirical shape factor was sufficiently close to that estimated from TEM images that the model could potentially be used to accurately predict the Young's moduli of NR/OM and NR/OS nanocomposites. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1621–1627, 2011     

Flavylium chromophores as species markers for dragon's blood resins from Dracaena and Daemonorops trees

A simple and rapid liquid chromatographic method with diode-array UV-vis spectrophotometric detection has been developed for the authentication of dragon's blood resins from Dracaena and Daemonorops trees. Using this method it was discovered that the flavylium chromophores, which contribute to the red colour of these resins, differ among the species and could be used as markers to differentiate among species. A study of parameters, such as time of extraction, proportion of MeOH and pH, was undertaken to optimise the extraction of the flavyliums. This method was then used to make extracts from samples of dragon's blood resin obtained from material of known provenance. From the samples analysed 7,6-dihydroxy-5-methoxyflavylium (dracorhodin), 7,4'-dihydroxy-5-methoxyflavylium (dracoflavylium) and 7,4'-dihydroxyflavylium were selected as species markers for Daemonorops spp., Dracaena draco and Dracaena cinnabari, respectively. The chromatograms from these samples were used to build an HPLC-DAD database. The ability to discriminate among species of dragon's blood using the single marker compounds was compared with a principal components analysis of the chromatograms in the HPLC-DAD database. The results from the HPLC-DAD method based on the presence of these flavylium markers was unequivocal. The HPLC-DAD method was subsequently applied to 37 samples of dragon blood resins from the historical samples in the Economic Botany Collection, Royal Botanic Gardens, Kew. The method identified anomalies in how samples in this collection had been labelled. It is clear that the method can be used to evaluate the provenance of samples used in different areas of cultural heritage. It also could be used to monitor the trade of endangered species of dragon's blood and the species being used in complex formulations of traditional Chinese medicine.     

Evaluation of direct analysis in real time mass spectrometry for onsite monitoring of batch slurry reactions

Batch slurry reactions are widely used in the industrial manufacturing of chemicals, pharmaceuticals, petrochemicals and polymers. However, onsite monitoring of batch slurry reactions is still not feasible in production plants due to the challenge in analyzing heterogeneous samples without complicated sample preparation procedures. In this study, direct analysis in real time mass spectrometry (DART-MS) has been evaluated for the onsite monitoring of a model batch slurry reaction. The results suggested that automation of the sampling process of DART-MS is important to achieve quantitative results. With a sampling technique of manual sample deposition on melting point capillaries followed by automatic sample introduction across the helium beam, relative standard deviation (RSD) of the protonated molecule signals from the reaction product of the model batch slurry reaction ranged from 6 to 30%. This RSD range is improved greatly over a sampling technique of manual sample deposition followed by manual sample introduction where the RSDs are up to 110%. Furthermore, with the semi-automated sampling approach, semi-quantitative analysis of slurry samples has been achieved. Better quantification is expected with a fully automated sampling approach.     

Synthesis of 2′-deoxyguanosine containing a N2-polyamine

The synthesis of benzylated N²-(4,7,10,13-tetraazatridec-1-yl)-2′-deoxyguanosines 4 was accomplished by a key nucleophilic reaction of the novel unsymmetrical polyamine 2 , with 3′,5′-O-(tetraisopropyldisiloxane-1,3-diyl)-2-chloro-2′-deoxyinosine ( 1 ).     

Synthesis of novel C-2 substituted pyrimidine nucleoside analogs

A series of 2-(2-oxoalkylidene)-4(1H)-pyrimidinone nucleoside analogs were synthesized by the addition of the lithium enolates of methylketones to 2,5′- and 2,2′-anhydrouridines and to 2,5′-anhydrothymidines. Alternatively, 2-thiouridine was alkylated with bromomethyl ketones to yield 2-(2-oxoalkyl)thio-4(1H)-pyrimidinone ribofuranosides in good yields. These intermediates were subsequently transformed into the title compounds via an Eschenmoser sulfur extrusion reaction. The 2-(2-oxoalkylidene)-4-(1H)-pyrimidinone nucleoside analogs exhibit enol proton signals in their ¹H nmr spectra indicative of hydrogen bonding between N-3 and keto oxygen. These structures offer functional groups with potential for Watson-Crick hydrogen bonding.     

Long-lived charge carrier generation in ordered films of a covalent perylenediimide–diketopyrrolopyrrole–perylenediimide molecule

The photophysics of a covalently linked perylenediimide–diketopyrrolopyrrole–perylenediimide acceptor–donor–acceptor molecule (PDI–DPP–PDI, 1) were investigated and found to be markedly different in solution versus in unannealed and solvent annealed films. Photoexcitation of 1 in toluene results in quantitative charge separation in τ = 3.1 ± 0.2 ps, with charge recombination in τ = 340 ± 10 ps, while in unannealed/disordered films of 1, charge separation occurs in τ < 250 fs, while charge recombination displays a multiexponential decay in ∼6 ns. The absence of long-lived, charge separation in the disordered film suggests that few free charge carriers are generated. In contrast, upon CH₂Cl₂ vapor annealing films of 1, grazing-incidence X-ray scattering shows that the molecules form a more ordered structure. Photoexcitation of the ordered films results in initial formation of a spin-correlated radical ion pair (electron–hole pair) as indicated by magnetic field effects on the formation of free charge carriers which live for ∼4 μs. This result has significant implications for the design of organic solar cells based on covalent donor–acceptor systems and shows that long-lived, charge-separated states can be achieved by controlling intramolecular charge separation dynamics in well-ordered systems.