Effects of Li Substitution and Sintering Temperature on Properties of Bi0.5（Na,K）0.5TiO3 Lead-Free Piezoelectric Ceramics

Bi0.5 （Na0.72K0.28- x Lix ）0.5 TiO3 （BNKLT- 100x） lead-free piezoelectric ceramics are synthesized by conventional solid state sintering techniques. The dielectric and piezoelectric properties of the BNKLT-100x ceramics as a function of Li content are systematically investigated. It is found that not only Li content but also the sintering temperature has a strong effect on the piezoelectric properties of BNKLT. The piezoelectric constant d33 Of BNKLT varies from 120 to 252pC/N in the Li content range from 0.03 to 0.16. In the sintering temperature range from 1080 to 1130℃, the d33 value of BNKLT-6 changes from 200pC/N to 252pC/N. The BNKLT-6 sample sintered at 1100℃ has the highest piezoelectric constant d33 of 252pC/N, with the electromechanical coupling factors kp of 0.32 and kt of 0.44.     

Effect of Aspect Ratio Distribution on Localized Surface Plasmon Resonance Extinction Spectrum of Gold Nanorods

Gold nanorods with different aspect ratios are prepared in micells using a seeded growth method. Their extinction spectra are observed with an UV-visible spectrophotometer and analysed theoretically. It is known that there are two plasmon resonance peaks for gold nanorod corresponding to transverse and longitudinal plasmon resonance respectively. Moreover, the longitudinal plasmon resonance peak shifts to long wavelength when we increase the aspect ratio determined from TEM. Especially, we model the extinction spectrum using Gans' theory and compare it with our experimental result. Considering the aspect radios distribution of gold nanorods, it is found that longitudinal plasmon resonance peak will be wider than the nanorods with single aspect ratio, which is consistent with our experimental result. In addition, the effect of dielectric constant of surrounding medium is considered.     

Photonic Crystal Fibre SERS Sensors Based on Silver Nanoparticle Colloid

A photonic crystal fibre （PCF） surface enhanced Raman scattering （SERS） sensor is developed based on silver nanoparticle colloid. Analyte solution and silver nanoparticles are injected into the air holes of PCF by a simple modified syringe to overcome mass-transport constraints, allowing more silver nanoparticles involved in SERS activity. This sensor offers significant benefit over the conventional SERS sensor with high flexibility, easy manufacture. We demonstrate the detection of 4-mercaptobenzoic acid （4-MBA ） molecules with the injecting way and the common dipping measurement. The injecting way shows obviously better results than the dipping one. Theoretical analysis indicates that this PCF SERS substrate offers enhancement of about 7 orders of magnitude in SERS active area.     

Upconversion in Highly Doped Er~(3 )-Yb~( 3 ) Fiber Pumped by Ti∶Sapphire Laser at 800 nm

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｔｈｅｉｎｆｒａｒｅｄｔｏｖｉｓｉｂｌｅｕｐｃｏｎｖｅｒｓｉｏｎｐｒｏｃｅｓｓｅｓｉｎｒａｒｅｅａｒｔｈｄｏｐｅｄｆｉｂｅｒｈａｖｅｂｅｅｎａｔｔｒａｃｔｉｎｇｇｒｅａｔｉｎｔｅｒｅｓｔｂｅｃａｕｓｅｏｆｉｔｓａｐｐｌ?..     

配位多面体的群重叠积分

本文讨论了配位多面体的群重叠积分计算问题, 给出了这种群重叠积分的一般形式以及它们满足的一些关系, 用第一类点群将群重叠积分的计算化简, 由此定义了有关的几何参数并研究了它们的性质, 以正六面体为例说明了这些参数的具体计算。     

硫氰酸铀铣(18-冠-6)铵(或钾)配合物的合成, 特性和结构

本文报导了硫氰酸铀铣(18-冠-6)铵和硫氰酸铀酰(18-冠-6)钾两种固体配合物的合成。由测定其物理常数及谱学数据, 确定了配合物的组成为[(C12H24O6)M]2UO2(NCS)4H2O(M=NH4, K)。X射线结构分析确定了二种单晶的结构。铵配合物属正交晶素, 空间群为Fdd2, 钾配合物属单斜晶系, 空间群为C2/c。     

NAD(P)H辅酶模型还原碳正离子反应的研究: 动力学、热力学及反应机理

本文对NAD(P)H模型物BNAH同xanthylium正离子反应的动力学进行了较为详尽的测定。同位素效应,自由基抑制剂对反应的影响以及对不同机理模式中各基元步骤的热力学趋动力的研究均表明,反应由决速的电子转移引发,随后通过快速的氢原子转移而形成产物。动力学活化参数的分析指出,电子转移前反应底物间首先形成一个预配合平衡。本文还对BNAH还原9-苯基xanthylium正离子和三苯甲烷正离子的机理进行了较合理的估测。     

(Ba,Pb)TiO~3的水热合成

以醋酸钡和钛酸四丁酯为原料, 在温和的水热条件下成功地制备出四方结构BaTiO~3和纯钙钛矿结构PbTiO~3, 以及固溶体(Ba, Pb)TiO~3。与氯离子和硝酸根离子比较, 醋酸根离子更有利于BaTiO~3晶粒的增大。以活性的钛酸四丁酯作为钛源, 200℃-240℃的碱液中, 即会有四方相BaTiO~3的形成, 高填充度也能促进四方相BaTiO~3的形成。     

层状液晶中水溶性超微粒子材料[Co(NH~3)~6]Cl~3的制备

利用溶剂在层状液晶中的渗透性和层状液晶中溶剂厚度的限定性, 在TritonX-100/C~10H~21OH/H~2O体系层状液晶中, 以4%Co(NH~3)~6]Cl~3水溶液组分水制备水溶性超微粒子材料[Co(NH~3)~6]Cl~3, 粒径约为3~6nm。     

水溶液中芘的荧光被核酸碱基猝灭的研究

众所周知,稠环芳烃是一类具有致癌性的物质.虽然对其致癌机理的认识尚未形成一致的看法,但一般都认为同稠环芳烃与DNA,蛋白质等生物活性物质的相互作用有关.因为致癌物后的致癌作用最终都是通过损伤细胞中的DNA而实现的.