衡量网络可靠性的新模型

本文分析了传统的网络可靠性优化设计方法所存在的问题 ,给出了网络的通信通路数的定义 ,并基于网络的通信通路数给出了更能反映网络运行的实际情况的网络可靠性的定量模型 ,从而解决了传统网络可靠性优化设计方法所存在的问题 .     

非谐振腔型KTP光参变振荡器

研究了双晶体走离补偿、非谐振腔型KTP光参变振荡器，利用一套膜片实现了KTP相位匹配所允许的全波段调谐，信号光调谐范围0.698μm-1.026μm，闲频光调谐范围1.105μm-2.237μm。5倍阈值处，信号光840nm最高输出能量53mJ，能量转换效率25.8%，量子转换效率40％，闲频光的量子郊率也达到32％。     

考虑流体湿润性影响的核沸腾RohsenoW修正模型

添加界面活性剂的核沸腾在改变蒸气泡生长特性的同时，主要是强化了对流换热．本文考虑流体湿润性影响，对核沸腾换热沿用最广的对流类比模型－Ｒｏｈｓｅｎｏｗ模型进行了修正．通过对实验数据的检验，表明修正后的模型预示值与实测结果吻合很好．     

管肋式辐射器排热特性的数值分析与优化设计

为得到按单面辐射方式布置的管肋式空间辐射器的排热特性，建立了相应的数学模型．采用数值模拟方法分析了管内流体温度、肋片几何尺寸和等效热沉温度对辐射器排热特性的影响，得到了不同参数值下辐射器单位面积排热量以及特定参数范围内的辐射器肋片最佳宽度和肋片效率．数值模拟结果对辐射器的工程结构设计以及空间站热管理方案的优化分析具有一定的参考价值．     

NON-DESTRUCTIVE EVALUATION OF HORIZONTAL CRACK DETECTION IN BEAMS USING TRANSVERSE IMPACT

Numerical and experimental studies for crack detection in beam employing transverse impact are presented. In the numerical study, a beam model of wave propagation is developed to calculate the time history of beam response before, over and after the crack region. It is expected that the resulting wave in the beam will be scattered by the crack and will carry information on the location and geometry of the crack. Experiments using a scanning laser vibrometer on specimens containing simulated crack are then conducted to verify the numerical results. Comparison study between the numerical results and experimental observations are conducted; good correlation between theory and experiment is observed. The beam model of wave propagation and adaptive multilayer perceptron networks (MLP) are then used for inverse identification of crack parameters (i.e., crack location, depth and length) in the beams. Time-domain displacement responses calculated using the present beam model containing predetermined crack parameters are used as training data for the MLP. Once the MLP is trained, the MLP networks are then employed for inverse determination of an unknown crack in a beam using experimental displacement responses measured with a scanning laser vibrometer. Examples show that the procedure performs well for the determination of a wide range of values for the location, depth and length of the crack.     

Electro-optical performance of polymer stabilized cholesteric texture cell: The influence of chiral dopant and monomer concentration

Reverse-mode polymer stabilized cholesteric texture (PSCT) cells with various chiral dopant and monomer concentrations were fabricated. Experimental results indicate that the chiral dopant concentration and the monomer concentration significantly influence the threshold voltage and hysteresis of the cells. The chiral dopant and monomer deform the hysteresis loop. Increasing the monomer concentration reduces the width of the hysteresis loop of the reverse-mode PSCT cell.     

基于专家动态权重的群组AHP交互式决策方法

为了能在群组决策中得到更为客观和准确的决策结果,在把专家权重划分为静态权重和动态权重的基础上,研究了在交互式决策中专家动态权重的确定方法,给出了共识度的一个定义.在此基础上,研究了群组AHP交互式决策方法中的一致性和相容性检验,给出了基于专家动态权重的群组AHP交互式决策方法流程,最后用一个示例说明了该方法的应用步骤.     

Hopf代数上的扭曲模和(斜)余配对Hopf模

本文第一部分主要把扭曲的方法运用到模上,从而得到扭曲模．作为特例,我们构造了H  M的Smaush模和量子模．当K是有限维Hopf代数,证明K*  M是一个右D(K)-Hopf模,因此得到了一个基本同构定理．第二部分主要把斜余配对双代数进行推广,得到了斜余配对Hopf模,并且给出判断斜余配对Hopf模的一个充要条件．     

应用马尔科夫状态转移链的作战航空综合体效能评估

文章阐述了作战航空综合体的相关概念及组成,应用马尔科夫状态转移链建立了作战航空综合体完成典型作战任务时的数学模型,确定了作战效能的评估指标,最后通过具体算例检验了模型的正确性和可行性.     

k-边覆盖对策及其核心

本文针对从图的k-边覆盖问题引出的合作对策模型，利用线性规划对偶理论得到了其核心非空的一个充分条件和构造核心分配的多项式时间算法，并将这一结果推广到了一般的k-集合覆盖对策模型中．