（Ti,Al）N Film on Normalized T8 Carbon Tool Steel Prepared by Pulsed High Energy Density Plasma Technique

Under optimized operating parameters, a hard and wear resistant （Ti,Al）N film is prepared on a normalized T8 carbon tool steel substrate by using pulsed high energy density plasma technique. Microstructure and composition of the film are analysed by x-ray diffraction, x-ray photoelectron spectroscopy, Auger electron spectroscopy and scanning electron microscopy. Hardness profile and tribological properties of the film are tested with nano- indenter and ring-on-ring wear tester, respectively. The tested results show that the microstructure of the film is dense ahd uniform and is mainly composed of （Ti,Al）N and A1N hard phases. A wide transition interface exists between the film and the normalized T8 carbon tool steel substrate. Thickness of the film is about lO00nm and mean hardness value of the film is about 26 GPa. Under dry sliding wear test conditions, relative wear resistance of the （Ti, Al）N film is approximately 9 times higher than that of the hardened T8 carbon tool steel reference sample. Meanwhile, the （Ti,Al）N film has low and stable friction coefficient compared with the hardened T8 carbon tool steel reference sample.     

Quantum Stackelberg Duopoly of Continuous Distributed Asymmetric Information

The minimal quantization structure is employed to investigate the quantum version of the Stackelberg duopoly with continuous distributed asymmetric information, i.e a continuous distribution while the second mover has the first mover has incomplete information that obeys complete information. It is found that the effects of the positive quantum entanglement on the outcomes exhibit many interesting features due to the information asymmetry. Moreover, although the first-mover advantage is counteracted by the information asymmetry, the positive quantum entanglement still enhances the first-mover advantage and improves the first-mover tolerance of the information asymmetry beyond the classical limit.     

连续锁模Nd∶YVO4激光器实现1 GHz高频输出

LD抽运全固体Nd∶YVO4激光器在连续锁模状态运转下获得了高达1 GHz的重复频率.实验中采用半导体可饱和吸收镜作为锁模元件.利用透过率只有0.8%的输出镜以及可获得较小抽运光斑的2 WLD作为抽运源来优化激光器设计,有效地抑制了调Q锁模状态的运转.低的激光器振荡阈值(35 mW)和连续锁模阈值(0.8 W)显示了饱和吸收体低的插入损耗和激光器合理的设计.在最大抽运1.6 W 时获得了210 mW的平均输出功率.     

Diode End-Pumped Passively Q-Switched Nd^3＋：GdVO4 Self-Raman Laser at 1176 nm

A compact diode-end-pumped passively Q-switched Nd^3＋ ：GdVO4/C^r4＋ ：YAG self-Raman laser at 1176 nm is demonstrated. When the To = 80% Cr^4＋：YAG saturable absorber is inserted into the cavity, the maximum Rtaman laser output reaches 175 mW with 3.8 W incident pump power. The optical conversion from incident to the Raman laser is 4.6% and the slope efficiency is 6.5%. The pulse energy, duration, and repetition frequency of the first stokes laser are 4.5μJ, 1.8 ns, and 38.5 kHz, respectively. There is strong blue emission （about 350- 400nm） can be observed in the Nd^3＋ ：GdVO4 crystal when the process of stimulated Raman scattering occurs, which is induced by the upconversion of the Nd^3＋ ions.     

Theoretical Investigation of Femtosecond-Resolved Photoelectron Spectrum of Na2 Molecules

Effect of laser fields on Na2 interaction potentials is studied by calculating the time-resolved photoelectron spectrum （TRPES） with the time-dependent wave-packet method. It is shown that the photoelectron spectrum at different delay times reflects the population in different electronic states. We inspect the periodicity of vibrational motion in neutral states, and map the vibrational wave-packet propagation in corresponding internuclear coordinate.     

利用改进型衍射理论对直边衍射效应的解释

利用改进型衍射理论MTPO（Modified Theory of Physics Optics）对直边衍射现象做出了解释．用数值模拟方法得出了直边衍射场强随衍射角度的变化曲线，并与广泛采用的菲涅耳近似衍射方法结果进行比较，发现在很大的角度空间上，二者所得出的衍射场强与精确解吻合较好．但在入射波的几何传播方向上，即边缘上的衍射场强分布，MTPO方法则具有更高的准确度．     

A位具有混合价态的钙钛矿氧化物Eu1-xKxTiO3(x＝0.2,0.32)的高温高压合成

以TiO2 和Eu2 O3为原料 ,利用固相反应法在 4.0GPa和 10 90℃下合成了钙钛矿氧化物Eu1-xKxTiO3(x =0 .2 ,0 .32 )。XRD测量表明样品为立方结构。151EuMo　¨ssbauer谱测试给出同质异能移位分别为～ 0mm/s和～ - 13mm/s的两个吸收峰 ,表明Eu离子为 2和 3混合价。在 480和64 80G的磁场范围内只观察到一个线宽为 314 0G、g因子为 2 .0 0的信号 ,这是由Eu2 产生的。在EPR谱上没有观察到Ti3 和A位缺位的信号 ,说明在样品中的Ti在B位是 4价的。在固态反应中 ,Eu3 离子比Ti4 离子更容易被还原。     

R/S统计量的中偏差

在某种弱于标准大偏差条件下,甚至不需要二阶矩假设,给出了R/S统计量的中偏差原理.     

“吕”字形巷道布置的卸压机理分析

利用有限元法分析了综放采场瓦斯巷和回风巷或运输巷采用“吕”字形布置后的卸压机理，得到了上部瓦斯巷宽度对下部回风巷或运输巷卸压效果的定量关系，为改革综放采场巷道布置并提高瓦斯巷抽放效果提供了新的设计思路和可靠依据。     

大口径氘化磷酸二氢钾晶体离线亚纳秒激光预处理技术

大口径氘化磷酸二氢钾(DKDP)晶体抗激光损伤性能偏低严重地制约着大型高功率激光装置输出水平.本研究利用离线亚纳秒激光预处理技术有效地提升了大口径DKDP晶体抗激光损伤性能.实际使用情况表明,采用离线亚纳秒激光预处理后,DKDP晶体在9 J/cm²激光通量辐照下的表面平均损伤密度得到大幅下降,由未处理前的5.02 pp/cm²(1pp表示1个百分点)降至0.55 pp/cm²,降幅为一个数量级.同时,激光预处理对晶体损伤尺寸具有一定的抑制作用,预处理后晶体损伤点尺寸分布曲线向尺寸减小的方向平移,尺寸分布峰值由预处理前的25μm降至预处理后的18—20μm.