Luminescent Di‐ and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis,Characterization, and Application in OLEDs

New bis‐ and tris(iminopyrrole)‐functionalized linear (1,2‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 2 ), 1,3‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 3 ), 1,4‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 4 ), 4,4′‐(HNC₄H₃‐C(H)?N)₂‐(C₆H₄‐C₆H₄) ( 5 ), 1,5‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 6 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 7 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₄H₈ ( 8 )) and star‐shaped (1,3,5‐(HNC₄H₃‐C(H)?N‐1,4‐C₆H₄)₃‐C₆H₃ ( 9 )) π‐conjugated molecules were synthesized by the condensation reactions of 2‐formylpyrrole ( 1 ) with several aromatic di‐ and triamines. The corresponding linear diboron chelate complexes (Ph₂B[1,3‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 10 ), Ph₂B[1,4‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 11 ), Ph₂B[4,4′‐bis(iminopyrrolyl)‐biphenyl]BPh₂ ( 12 ), Ph₂B[1,5‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 13 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 14 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐anthracenyl]BPh₂ ( 15 )) and the star‐shaped triboron complex ([4′,4′′,4′′′‐tris(iminopyrrolyl)‐1,3,5‐triphenylbenzene](BPh₂)₃ ( 16 )) were obtained in moderate to good yields, by the treatment of 3 – 9 with B(C₆H₅)₃. The ligand precursors are non‐emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π‐conjugation length. The photophysical properties of the luminescent polyboron compounds were measured, showing good solution fluorescence quantum yields ranging from 0.15 to 0.69. DFT and time‐dependent DFT calculations confirmed that molecules 10 and 16 are blue emitters, because only one of the iminopyrrolyl groups becomes planar in the singlet excited state, whereas the second (and third) keeps the same geometry. Compound 13 , in which planarity is not achieved in any of the groups, is poorly emissive. In the other examples ( 11 , 12 , 14 , and 15 ), the LUMO is stabilized, narrowing the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO–LUMO), and the two iminopyrrolyl groups become planar, extending the size of the π‐system, to afford green to yellow emissions. Organic light‐emitting diodes (OLEDs) were fabricated by using the new polyboron complexes and their luminance was found to be in the order of 2400 cd m^?2, for single layer devices, increasing to 4400 cd m^?2 when a hole‐transporting layer is used.     

Graphene Oxide Nanosheets Modified with Single‐Domain Antibodies for Rapid and Efficient Capture of Cells

Peripheral blood can provide valuable information on an individual’s immune status. Cell‐based assays typically target leukocytes and their products. Characterization of leukocytes from whole blood requires their separation from the far more numerous red blood cells. 1 Current methods to classify leukocytes, such as recovery on antibody‐coated beads or fluorescence‐activated cell sorting require long sample preparation times and relatively large sample volumes. 2 A simple method that enables the characterization of cells from a small peripheral whole blood sample could overcome limitations of current analytical techniques. We describe the development of a simple graphene oxide surface coated with single‐domain antibody fragments. This format allows quick and efficient capture of distinct WBC subpopulations from small samples (～30 μL) of whole blood in a geometry that does not require any specialized equipment such as cell sorters or microfluidic devices.     

General Variable Neighborhood Search for computing graph separators

Computing graph separators in networks has a wide range of real-world applications. For instance, in telecommunication networks, a separator determines the capacity and brittleness of the network. In the field of graph algorithms, the computation of balanced small-sized separators is very useful, especially for divide-and-conquer algorithms. In bioinformatics and computational biology, separators are required in grid graphs providing a simplified representation of proteins. This papers presents a new heuristic algorithm based on the Variable Neighborhood Search methodology for computing vertex separators. We compare our procedure with the state-of-the-art methods. Computational results show that our procedure obtains the optimum solution in all of the small and medium instances, and high-quality results in large instances.     

Influence of the purification process on the stability of <Emphasis Type="Italic">Jatropha curcas</Emphasis> biodiesel

The aim of this work was to evaluate the influence of the purification process on the stability of Jatropha curcas biodiesel. The biodiesel was obtained using a variety of purification processes: three wet methods with different drying processes (vacuum oven, conventional oven and anhydrous sodium sulfate) and one dry method (purification with adsorbent magnesium silicate). Biodiesel was characterized through the analysis of carbon residue, acidity index, infrared and gas chromatography. The composition J. curcas oil indicated 56.3 % of unsaturated fatty acids and 43.7 % of saturated fatty acids. Jatropha oil presented high quantity of saturated acids, which are less susceptible at oxidation. The biodiesel sample that was chemically purified (PUsq) presented better purity, indicating be the process more efficient in remove the residues of synthesis. Thermogravimetric curves of purified biodiesel by wet method, PUsq, with chemical drying using anhydrous sodium sulfate, and PUsv, with vacuum drying, showed the highest initial decomposition temperatures, indicating higher thermal stability. The carbon residue and infrared analyses suggested that contamination by catalyst residue is a determining factor in reduction of the oxidative stability of biodiesel. The oxidative stability was evaluated using Rancimat and pressure differential scanning calorimetry. Biodiesel samples showing better oxidative stability were purified using PUsq and PUsv, which obtained stability of 6 h using the Rancimat technique, the minimum limit set by Brazilian legislation, without the addition of antioxidant, suggesting that these methods least influenced the stability of biodiesel.     

Performance of biodegradable microcapsules of poly(butylene succinate), poly(butylene succinate-co-adipate) and poly(butylene terephthalate-co-adipate) as drug encapsulation systems

Poly(butylene succinate) (PBSu), poly(butylene succinate-co-adipate) (PBSA) and poly(butylene terephthalate-co-adipate) (PBTA) microcapsules were prepared by the double emulsion/solvent evaporation method. The effect of polymer and poly(vinyl alcohol) (PVA) concentration on the microcapsule morphologies, drug encapsulation efficiency (EE) and drug loading (DL) of bovine serum albumin (BSA) and all-trans retinoic acid (atRA) were all investigated. As a result, the sizes of PBSu, PBSA and PBTA microcapsules were increased significantly by varying polymer concentrations from 6 to 9%. atRA was encapsulated into the microcapsules with an high level of approximately 95% EE. The highest EE and DL of BSA were observed at 1% polymer concentration in values of 60 and 37%, respectively. 4% PVA was found as the optimum concentration and resulted in 75% EE and 14% DL of BSA. The BSA release from the capsules of PBSA was the longest, with 10% release in the first day and a steady release of 17% until the end of day 28. The release of atRA from PBSu microcapsules showed a zero-order profile for 2 weeks, keeping a steady release rate during 4 weeks with a 9% cumulative release. Similarly, the PBSA microcapsules showed a prolonged and a steady release of atRA during 6 weeks with 12% release. In the case of PBTA microcapsules, after a burst release of 10% in the first day, showed a parabolic release profile of atRA during 42 days, releasing 36% of atRA.     

A miniature and field-applicable multipumping flow analyzer for ammonium monitoring in seawater with fluorescence detection

In this article, a simple, economic, and miniature flow analyzer for ammonium in seawater based on the solenoid micropumps is presented. A single reagent of sodium tetraborate, ortho-phthaldialdehyde (OPA), and sodium sulfite was used and optimized applying the modified SIMPLEX method. A special-made detection cell for fluorescence detection of the reaction product isoindol-1-sulfonat was made and combined with a commercial photomultiplier tube, a long-pass optical filter, and an UV-LED as excitation light source. A LOD down to 13 nmol/L was achieved. The fabrication and application of a miniature reaction coil heating device for reaction rate enhancement is further described. The system featured an injection frequency of 32 h⁻¹ at average standard deviation of 3%.     

Azidoacetone as a complexing agent of transition metals Ni2+/Co2+ promoted dissociation of the C-C bond in azidoacetone

The relevance of metal interactions with azides has led us to the study of the complexation of some transition metals, nickel and cobalt, by azidoacetone by means of electrospray ionization mass spectrometry (ESI-MS). Complexes were obtained from solutions of NiCl(2) and CoCl(2) , in methanol/water. Nickel was electrosprayed with other counter ion, bromide (Br), as well as other solvent (ethanol/water). For nickel and cobalt, the complexes detected were single positively charged, with various stoichiometries, some resulted from the fragmentation of the ligand, the loss of N(2) being quite common. The most abundant species were [Ni(II)Az(2)X](+) where X = Cl, Br and Az = azidoacetone. Some of the complexes showed solvation with the solvent components. Metal reduction was observed in complexes where a radical was lost, resulting from the homolytic cleavage of a metal coordination bond. Collision-induced dissociation (CID) experiments followed by tandem mass spectrometry (MS-MS) analysis were not absolutely conclusive about the coordination site. However, terminal ions of the fragmentation routes were explained by a gas-phase mechanism proposed where a C-C bond was activated and the metal inserted subsequently. Density functional theory calculations provided structures for some complexes. In [Ni(II)Az(2)X](+) species, one azidoacetone ligand is monodentate and the dominant binding location is the alkylated nitrogen and not the carbonyl group. The other azidoacetone ligand is bidentate showing coordination through alkylated nitrogen and the carbonyl group. These are also the preferential binding sites for the most stable isomer of [Ni(II)AzX](+) species.     

Alkyl group effect on the conformational isomerism of trans-2-bromoalkoxycyclohexanes analyzed by nmr spectroscopy and theoretical calculations

Suitable (3)J(H,H) coupling constants and theoretical calculations were used to define the conformational preferences of trans-2-bromoalkoxycyclohexanes (alkoxy = OMe, OEt, O(i)Pr, and O(t)Bu) for the isolated molecule and as a function of the medium. The diaxial conformer was preponderant, or at least similarly populated to the diequatorial form, for the tert-butoxy derivative only, while the diequatorial conformer was prevalent for the remaining alkoxy derivatives (except for the OMe derivative in CCl(4) solution). The conformational behavior of these compounds was analyzed on the basis of classical steric effects and attractive electron delocalizations, by means of natural bond orbital analysis.