�͹��ʵ绡�ŵ縨������ȼ�յ�ʵ���о�

Different ratios of methane/air in the low power arc discharges assisted methane combustion were studied at atmospheric pressure. Plasma emission spectroscopy was recorded by an optical emission spectrometer. The possible physical and chemical reaction process and mechanisms were discussed. With a plasma in the on or off state, the physical appearances of the methane combustion flame were observed and compared, the temperature of the flame in the main combustion zone was investigated. The gas compositions of CH₄, CO and O₂ were analyzed by the gas chromatography and flue gas analyzer. The results showed that when plasma was in the on state, the temperature of flame increased and the combustion efficiency enhanced in stable combustion due to decrease of CH₄, CO and O₂; the combustion enhancement was more obvious at low ratio of methane/air; the rich combustion limits in terms of the ratio of methane/air was extended from 16% to 21%.     

LDI学生成绩评价方法的构建——以精细化学品化学课程为例

根据我院化工专业精细化学品化学课程改革的实际，围绕以评促学、以评助教，构建了LDI学生课程成绩评价方法。该方法以教师和学生为评价主体，从3个环节（理论学习、课内实验、创新实践）、4个维度（课前自学、课堂学习、课内实验与创新实践、期末考试）入手，将评价内容分为多个项目来引导学生学习、实践，并全面考核学生的知识与能力。该法不仅能提高学生学习的主动性，还能潜移默化地培养学生的创新意识和团队精神。     

多孔软硬磁Ni0.5Zn0.5Fe2O4/SrFe12O19复合纤维制备及吸波性能

通过静电纺丝技术制备了多孔软硬磁Ni_0.5Zn_0.5Fe₂O₄/SrFe₁₂O₁₉复合纤维,利用综合热重分析仪（TG-DSC）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线能谱仪（EDS）和矢量网络分析仪（VNA）等对复合纤维的晶体结构、微观形貌和电磁性能进行了表征,研究了不同软硬磁质量比对纤维结构和性能的影响。结果表明：900℃下制备的复合纤维具有立体多孔结构,软硬磁质量比为1∶3时,复合纤维的比表面积达到55 m²·g^-1。吸波性能测试结果显示,当吸波剂涂层厚度为3.5 mm时,复合纤维在10.6 GHz处反射损失（R_L）值达到-31.9 dB,在2~18 GHz频率范围内,R_L值小于-10 dB的吸收带宽达到10.5 GHz,覆盖了整个X波段（8.2~12.4 GHz）和Ku波段（12.4~18 GHz）,显示出优异的宽波段吸收性能。     

载银sod基纳米分子筛的合成及抗菌性能

采用两步法合成了 sod 基系列分子筛(EMT、FAU、SOD),并通过离子交换法引入 Ag⁺得到载银分子筛,通过 X 射线衍射(XRD)、扫描电子显微镜(SEM)证明离子交换前后分子筛骨架结构和晶粒尺寸没有发生明显变化;通过红外光谱(IR)、热重(TG)证明制得的载银分子筛具有良好的稳定性;对获得的载银分子筛进行了Ag⁺释放实验与抗菌能力测试,考察了分子筛种类和晶粒尺寸对抗菌性能的影响。结果表明具有笼状结构的FAU与EMT分子筛因可储存更多的Ag⁺而具有更好的抗菌性能,而具有超笼结构的 FAU 分子筛抗菌性能最优。通过对比不同晶粒尺寸载银 FAU 分子筛抗菌数据发现,晶粒尺寸为 100 nm 的载银FAU分子筛因外表面丰富的抗菌活性位点以及其内部可以储存并不断释放 Ag⁺而具有最优的抗菌性能和抗菌寿命。而晶粒尺寸为10 nm的载银FAU分子筛由于晶粒尺寸较小、外比表面积大、扩散路径短,Ag⁺的释放速率最快,抗菌效率最高。     

3-吲哚乙酸印迹聚合物的制备及其分子识别性能

以IAA为模板分子,4-乙烯基吡啶(4-Vpy)为功能单体,乙腈为致孔剂,采用本体聚合方法,制备了IAA的印迹聚合物P(4-Vpy),用色谱法评价了其分子识别性能,并且与同样条件下以丙烯酰胺(AA)为功能单体合成的IAA印迹聚合物P(AA)进行了比较。结果表明,乙腈为流动相时,P(4-Vpy)比P(AA)对IAA具有更高的印迹效率,对IAA表现出了更好的分子识别能力。流动相对P(4-Vpy)分子识别能力的影响实验证明,静电作用在其分子识别过程中起重要作用。两种不同用量的乙腈为致孔剂制备所得IAA印迹聚合物P(4-Vpy)和P`(4-Vpy)的色谱测定结果表明,致孔剂的加入量对其印迹效率有显著影响。     

CATALASE MIMIC WITH Fe (II) METALLOMICELLE

The effect of Fe (II) metallomicelle as a model of catalase, which was formed by adding surfactants (CTAB, SDS, LSS, Brij35) in Fe (II) -trien complex of molar ratios 1: 500 on the decomposition of hydrogen peroxide was investigated at 20°C and 30°C in pH 10 using KI-color and UV Spectrophotometry. A kinetic model for metallomicellar catalysis was proposed. The association constant of the ternary complex K and the rate constant of the decomposition of hydrogen peroxide k3 were obtained. The results indicate that the metallomicelles making up of Fe (II) metal complex and cationic or nonionic surfactants have obvious catalysis on the decomposition of hydrogen peroxide, but the metallomicelles making up of Fe (II) metal complex and anionic or zwitterionic surfactants have inhibition on this reaction.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

Explanation of Theoretical Mechanism of Isomerization of L-Alanine Conformation for Experimental Results

B3LYP/6-31＋＋G＊＊ method was applied to investigate the mechanism of alanine isomerization.12 minima and 22 transition states were obtained after optimization and several paths of isomerization were found.It is found that intramolecular single-bond rotation and proton transfer might lead to isomerization.The energy barrier of C–N bond rotation was lower than 2.52 kcal·mol 1,while the energy barrier ranges of the rotation of C–C and C–O were separately 0.43~ 7.01 and 4.69~12.19 kcal·mol 1,and the minimum energy barrier of proton transfer was 30.76 kcal·mol 1.The most probable isomerization path and mechanism for the two most stable conformations was discussed to find that the highest energy barrier to be crossed in this path was 11.87 kcal·mol 1.In order to understand the microscopic nature why only 4 conformations were detected in the experiment,thermodynamic properties of all conformations at the experimental temperature of 391 K was calculated.It is found that conformations XII,XI,X and IX can only unidirectionally convert into conformations rapidly with low energy and vanish immediately.The other conformations were distributed according to Maxwell-Boltzman＇s law,and the distribution probabilities of conformations I,II,III,IV,V,VI,VII and VIII were respectively 27.2%,26.5%,25.8%,6.4%,5.2%,4.8%,2.5% and 1.6%.Conformations I,II and III with bigger probability and stronger absorption peak were easy to detect in the experiment.Conformation IV had a relatively smaller probability（6.4%） and weak absorption peak which,however,could also be identified.The other conformations had too small probability to identify in the spectrum.     

十二烷基硫酸钠水溶液的动态表面吸附性质

利用MPTC型气泡压力张仪研究了十二烷基硫酸钠(SDS)溶液在不同NaCl 浓度下的动态表面吸附性质, 分析了离子型表面活性剂在表面吸附层和胶束中形成双电层结构产生表面电荷对动态表面扩散过程和胶束性质的影响. 结果表明, SDS在表面吸附过程中, 表面电荷的存在会产生5.5 kJ·mol^-1的吸附势垒(E_a), 显著降低十二烷基硫酸根离子(DS^-)的有效扩散系数(D_eff). 十二烷基硫酸根离子的有效扩散系数与自扩散系数(D)的比值(D_eff/D)仅为0.013, 这表明SDS与非离子型表面活性剂不同, 在吸附初期为混合动力控制吸附机制. 加入NaCl可以降低吸附势垒. 当加入不小于80 mmol·L^-1 NaCl后, E_a小于0.3 kJ·mol^-1, D_eff/D在0.8-1.2之间, 表现出与非离子型表面活性剂相同的扩散控制吸附机制. 同时, 通过分析SDS胶束溶液的动态表面张力获得了表征胶束解体速度的常数(k₂). 发现随着NaCl 浓度的增大, k₂减小, 表明SDS胶束表面电荷的存在会增加十二烷基硫酸根离子间的排斥力, 促进胶束解体.     

谷氨酸功能胶束温和催化水解甲基-β-D-纤维二糖苷

合成了一种含有谷氨酸残基的长链烷基表面活性剂N^α-十二烷基-L-谷氨酸. 研究了表面活性剂所形成的胶束体系在较温和条件下催化纤维素模型物甲基-β-D-纤维二糖苷(MCB)水解的反应. 研究表明此功能胶束对MCB水解为葡萄糖的反应在较低的温度(90℃)下就表现出明显的催化作用, 在pH 5.0附近具有最佳的催化水解效果.根据胶束催化的相分离模型获得MCB水解的一级反应速率常数(km).研究了胶束与组氨酸(His)或谷氨酸(Glu)所组成的复配体系对MCB的催化水解作用. 结果表明: 氨基酸小分子的加入极大地促进了水解反应的进行, 而胶束与氨基酸在1:1的摩尔浓度配比时催化效果最好. 温度对水解反应速率以及副产物的产生有明显的影响. 在130℃, pH 5.0的水溶液中, 胶束与谷氨酸的复配体系催化MCB水解反应1.5 h后的葡萄糖收率可达到36.6%. 本文也对此催化体系催化MCB水解反应动力学进行了研究, 获得了催化反应的表观一级速率常数(k_obsd), 计算得到催化水解反应生成葡萄糖的活化能(E_a)为97.18 kJ·mol^-1.