剪切对玻璃珠填充聚丙烯结晶行为的影响

应用Linkam CSS450剪切仪、广角X射线衍射仪(WAXD)和小角X射线散射仪(SAXS)等研究了剪切对玻璃珠填充聚丙烯结晶行为的影响, 结果表明, 与纯聚丙烯相比, 填加玻璃珠的聚丙烯体系中, 玻璃珠起到成核剂的作用, 不利于β晶的生成. 玻璃珠直径较小(4 μm)时, 剪切对聚丙烯β晶的生成影响较小; 当玻璃珠直径增加到35 μm时, 剪切速率为20 s-1左右最有利于β晶生成; 剪切速率和玻璃珠直径的增加, 有利于聚丙烯片晶的取向, 而且玻璃珠含量越高, 片晶的取向程度越大.     

微滴液相微萃取技术用于气相色谱-质谱法分析药品中的酞酸酯和对羟基苯甲酸酯

用微滴液相微萃取(SDME)与气相色谱-离子阱质谱联用测定药品中的酞酸酯和对羟基苯甲酸酯。考察了萃取溶剂的种类及用量、微液滴在样品溶液中的深度、萃取时间及搅拌子的搅拌速度对微滴液相微萃取效果的影响。优化的萃取条件:萃取溶剂为1.5 μL甲苯,微液滴在样品溶液中的深度为0.8 cm,搅拌子的搅拌速度为1000 r/min,萃取时间为20 min。该方法的线性范围为0.032~80 mg/L,检出限为0.6 μg/L~1.28 mg/L,加标回收率为95.85%~148.85%,相对标准偏差为3.9%~14.9%。     

A biomass carbon material with microtubule bundling and natural O-doping derived from goldenberry calyx and its electrochemical performance in supercapacitor

A promising biomass carbon material,manufactured by the carbonation of Physalis peruviana L.calyx at 700℃,is presented in this wo rk.Morphology characterization shows that the carbon material possesses long microtubule bundling and above 30%natural O-atom component on the surface.After KOH chemical etching,the materials maintain the oxygen content but exhibit more micropores and higher specific surface area up to 1732.6 m^2/g.Using as an electrode material for supercapacitor,the active carbon material exhibits high specific capacitance up to 339.7 F/g at 0.5 A/g in 3 mol/L KOH aqueous solution through three-electrode system.The active carbon material also exhibits excellent cycling stability(97%retention)by 10,000 cycles at 10 A/g.The outstanding electrochemical performances are attributing to the unique long microtubule bundling with much more pores and the abundant Oelement on the surface.This biomass carbon material with excellent electrochemical properties could be a useful material for multiple applications.     

五氧化二钒催化环己烯烯丙位氧化

 研究了以五氧化二钒为催化剂,以过氧化氢水溶液为氧源氧化环己烯. 考察了溶剂种类、溶剂用量、催化剂用量和反应温度等因素对催化剂性能的影响. 结果表明,常温下环己烯在此催化体系中主要发生烯丙位氧化反应生成环己烯酮. 溶剂的种类对催化活性和烯丙位酮式氧化的选择性具有较大的影响,丙酮是该反应的合适溶剂. 在丙酮与环己烯的体积比为4, 五氧化二钒与环己烯的质量比为1∶40, 过氧化氢与环己烯的摩尔比为3和反应温度为20 ℃的条件下,反应24 h后的环己烯转化率可达60%以上,环己烯酮选择性可达85%. 催化反应过程中丙酮可能与过氧化氢作用生成过氧化酮,从而进行氧转移,催化剂则经过V5+/V4+物种的循环使环己烯氧化成为环己烯酮等产物.     

可溶性聚硅酸铝铁的制备及其在废水处理中的应用

以赤泥为原料,制备了高效无机高分子絮凝剂——聚硅酸铝铁(PSAF),并将该絮凝剂用于处理工业废水．研究絮凝剂的使用效果与投加量、投加方式、pH值、搅拌条件及水样本身性能间的关系．     

快速扫描量热法研究聚对苯二甲酸-1,4-环己烷二甲醇酯的结晶和熔融行为

采用快速扫描量热法(FSC)结合传统的差示扫描量热仪(DSC)考察了聚对苯二甲酸-1,4-环己烷二甲醇酯(PCT)聚酯在接近玻璃化转变(T_g)和熔融温度(T_m)范围(100~270 ℃)的结晶和熔融行为。 较大过冷度时PCT聚酯结晶较快,FSC有效地抑制降温过程结晶的发生,而较低过冷度下传统DSC可以避免样品降解对实验结果的影响,二者的结合能很好地对PCT聚酯结晶动力学进行测量,实验结果表明在175 ℃时结晶速率最快。 并且利用Flash DSC对等温结晶温度下形成的片晶熔点进行加热速率的相关测量,在熔融动力学建模的基础上进行校准,以确定零加热速率下片晶的熔点。 Hoffman-Weeks方程中T_m与结晶温度(T_c)的线性关系与T_c=T_m的交点给出了PCT晶体的平衡熔融温度$T_m^o$为315 ℃。     

碳纳米管原子力显微镜针尖在结构生物学研究中的应用

碳纳米管以其较小的半径、较高的纵横比和高的柔韧性成为原子力显微镜对结构生物学进行研究的理想针尖。新的制备方法获得了亚纳米级半径的碳纳米管针尖,运用它们得到了生物大分子及其复合物的生物结构,并获得了新的生物信息,这用传统的原子力显微镜针尖是无法实现的。     

Facile Synthesis of 1, 2-Diazepine Derivatives under Microwave Irradiation

An efficient and convenient synthesis of 3, 5, 7-triaryl-4H-1, 2-diazepine from 2, 4,6-triarylpyrylium salts and hydrazine in water under microwave irradiation is reported. The same reaction can be conducted using 2, 4, 6-triarylthiopyrylium salts and hydrazine.     

微波辐射下LaNaY沸石的水热交换反应

报道微波辐射应用于ＮａＹ沸石与Ｌａ（ＮＯ＿３）＿３溶液的离子交换反应，结果表明微波辐射可提高Ｌａ￣＋的交换度，缩短交换时间。     

Magic microfluidic T-junctions: Valving and bubbling

We develop and characterize a simple microfluidic component: a T-junction of two microfluidic channels conveying a gas and a liquid into the junction. It can either microvalve the two fluids or microbubble the gas with its functions switchable and controlled by the inlet pressure ratio of the two fluids. For the microvalving, it requires no actuating, moving and sealing components. Instead, the flow channels and the mechanisms of supplying the two fluids into them provide all these functions automatically. For microbubbling, it generates indistinguishable (monodispersed) bubbles steadily and stably with their size and generation frequency well-controlled.