Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.     

Fluorescence resonance energy transfer in doubly-quantum dot labeled IgG system

The mouse immunoglobulin G (mouse IgG) as a kind of bio-molecule was labeled with two different luminescent colloidal semiconductor quantum dots (QDs), green-emitting CdTe quantum dots and red-emitting CdTe quantum dots in this work. As a result of the fluorescence resonance energy transfer (FRET) between the two different sizes nanoparticles with mouse IgG as the binding bridge, a significant enhancement of the emission of the red-emitting CdTe quantum dots and the corresponding quenching of the emission of green-emitting CdTe quantum dots were observed. The relationship between the concentration of the mouse immunoglobulin G and the fluorescence intensity ratio (I_a/I_d) of acceptors and donors was studied also. Under optimal conditions, the calibration graph is linear over the range of 0.1–20.0 mg/L mouse IgG.     

碳纳米管担载PtSn阳极催化剂对乙醇的电催化氧化性能研究

以多壁碳纳米管(MWNTs)为载体制备了担载型PtSn纳米催化剂,对其微观形貌和电催化性能进行了表征.透射电镜(TEM)及X射线衍射(XRD)测试结果表明,以MWNTs为载体提高了PtSn金属粒子的分散度,粒径分布范围在1.5-6.5nm之间,PtSn/MWNTs催化剂的平均粒径为3.6nm.循环伏安、计时电流及DEFC单池的实验结果表明,由于MWNTs具有独特的结构及丰富的表面基团和较高的导电率,PtSn/MWNTs催化剂对乙醇的催化氧化表现出比PtSn/XC-72更高的活性.     

Organic Reactions in Ionic Liquids： An Efficient Method for the Synthesis of Phenacyl Esters by Reaction of Carboxylic Acids with α-Bromoacetophenone Promoted by Potassium Fluoride

An efficient method is reported for the synthesis of phenacyl esters by reaction of carboxylic acids with a-bromoacetophenone promoted by potassium fluoride in ionic liquid [Bmim]PF6, the yield of the reaction is almost quantitative and the products are essentially pure.     

新型罗丹明型荧光探针的合成及其对Cu(Ⅱ)的识别性能

罗丹明B-酰肼和8-羟基-7-喹啉醛经缩合反应合成了一个新型的荧光探针(L),其结构经1H NMR,MS和元素分析表征。考察了L对金属离子的识别性能,结果表明:在乙腈溶液[V(MeCN)∶V(H2O)=19∶1,pH7.0]中,L可高选择性的识别Cu(Ⅱ)。Cu(Ⅱ)能诱导L内酰胺结构开环并形成1∶2型的配合物L-Cu(Ⅱ),这一过程是可逆的。     

HPLC-AFS联用测定海产品中砷的形态

建立了高效液相色谱-原子荧光分光光度法测定海产品中无机砷(As V,AsⅢ)、有机砷(DMA,MMA,AsB)含量的方法.样品经含10％(体积分数)HC1的提取液振荡提取、离心分离、二路形态分析预处理、高效液相色谱分离,用原子荧光光度计检测As(Ⅲ),DMA,MMA,As(v);四路条件(过氧化氢氧化和开启紫外灯)形态分析预处理装置处理,高效液相色谱分离,原子荧光光度计测定AsB.As(Ⅲ)线性范围为0～100.00 μg/L,r2=0.9997;DMA线性范围为0～100.00 μg/L,r2=0.9993;MMA线性范围为0～100.00 μg/L,r2=0.9990;As(Ⅴ)线性范围为0～100.00 μg/L,r2=0.999 1;AsB线性范围为0～200.00 μg/L,,r2=0.9994.3个样品加标回收率为As(Ⅲ)86.7％～89.4％,DMA 111.2％～117.0％,MMA 109.7％～111.6％,As(Ⅴ) 83.8％～90.7％,AsB 88.3％～90.4％.用该方法测定虾仁(干)5个价态测定结果的相对标准偏差为3.07％～9.93％(n=6).5个价态的检出限(S/N=2)为As(Ⅲ)0.29 μg/L,DMA 0.36 μg/L,MMA 0.27 μg/L,As(V) 0.56 μg/L,AsB l.46 μg/L.该方法适用于海产品中As(Ⅲ),DMA,MMA,As(V),AsB含量的测定.     

Extraction of tributyltin by magnetic molecularly imprinted polymers

We have prepared core-shell magnetic molecularly imprinted polymer nanoparticles for recognition and extraction of tributyl tin (TBT). The use of particles strongly improves the imprinting effect and leads to fast adsorption kinetics and high adsorption capacities. The functional monomer acrylamide was grafted to the surface of Fe₃O₄ nanospheres in two steps, and MIP layers were then formed on the surface by creating a MIP layer on the surface consisting of poly(ethyleneglycol dimethacrylate) with a TBT template. The particles were characterized in terms of morphological, magnetic, adsorption, and recognition properties. We then have developed a method for the extraction of TBT from spiked mussel (Mytilidae), and its determination by liquid chromatography-tandem mass spectrometry. The method has a limit of detection of 1.0 ng?g^?1 (n?=?5) of TBT, with a linear response between 5.0 and 1,000 ng?g^?1. The proposed method was successfully applied to the determination of trace TBT in marine food samples with recoveries in the range of 78.3–95.6 %.

Preparation and characterization of an active catalyst

As an active catalyst to promote thermolysis of ammonium perchlorate (AP), potassium lead hexanitrocobaltate(II) complex (K₂Pb[Co(NO₂)₆]) was synthesized by the direct deposition method and inverse microemulsion method. Its submicron, size, cube morphology, and crystal structure were investigated by SEM, TEM, and XRD analysis, respectively. Thermal decomposition of K₂Pb[Co(NO₂)₆] was studied by the TG/DSC-IR online system and XRD analysis. The catalyst was decomposed at about 300 °C; its gaseous products were NO₂, NO, and N₂O and its solid products were Pb₃O₄, Co₃O₄, PbO, CoO, and KNO₂. Because thermal decomposition of the catalyst was synchronous with low temperature decomposition of AP, thermolysis of AP was promoted remarkably. In particular, the gaseous products (NO _x ) could directly oxidize the absorbed NH₃. As a result, compared to the data of pure AP, the integral heat of AP added 3.0 wt% of the catalyst multiplied by 280 %, the maximum rate of heat release increased by 634 %. The decomposition of catalyzed AP ended at about 317 °C, at which only less than 30 % of pure AP decomposed.     

新型磺酸盐型Gemini表面活性剂的合成及其与聚合物相互作用

以溴代正烷烃、乙二胺、1,3-丙磺内酯合成了一系列新型磺酸盐型Gemini表面活性剂(SGS-8、SGS-10、SGS-12、SGS-14);采用IR、1H NMR及元素分析等手段对合成产物进行结构表征,并研究了其表面活性,采用等温滴定微量热技术、表面张力法和稳态荧光光谱法研究了SGS-12与聚丙烯酰胺(PAM)的相互作用规律及热力学参数。结果表明,合成的产物纯度较高,具有较低的cmc值和较好的表面活性;SGS-12/PAM混合体系的表面张力曲线和芘探针在体系中微极性的变化表明,二者发生相互作用且形成混合胶束;SGS-12与PAM结合是一个由焓驱动的自发过程,△H和△S均小于0,表明相互作用力以氢键和范德华力为主,合成产物在聚丙烯酰胺分子上的平均结合数为287。     

基于巯基-烯点击反应制备有机-无机杂化硼酸亲和整体柱用于糖蛋白的选择性富集

发展了以巯基-烯点击反应制备有机-无机杂化硼酸亲和整体柱的新方法。首先以四甲氧基硅烷(TMOS)和巯丙基三甲氧基硅烷(MPTMS)作为反应单体,采用溶胶-凝胶反应制备表面含巯基的硅胶整体柱。然后利用巯基-烯(thiol-ene)的点击反应在整体柱上修饰硼酸配基3-丙烯酰胺基苯硼酸(AAPBA),制成AAPBA-硅胶杂化亲和整体柱。对影响硼酸亲和整体柱性能的条件如TMOS与MPTMS的比例、聚乙二醇和甲醇的用量等进行了优化。并采用扫描电镜、红外光谱等分析仪器对整体柱形貌和机械稳定性能进行了表征。研究了AAPBA-硅胶杂化亲和整体柱的分离性能,结果表明,其在中性条件下对含有顺式二醇的生物小分子核苷具有良好的特异亲和能力,并已成功地应用于卵清蛋白、辣根过氧化物酶等糖蛋白的分离。基于巯基-烯反应的制备方法新颖、可靠,可用于制备多种不同类型的硼酸亲和整体柱,具有较大的应用前景。