基于非线性最小二乘法的多光谱拟合程序：应用于12CH4谱线参数分析

精确的甲烷分子实验光谱参数在大气科学和天文探测等领域有着广泛的应用,特别是谱线的展宽系数及其温度依赖系数对于甲烷分子浓度廓线的研究尤为重要。精密的实验测量是获得准确谱线参数的重要手段。采用实验测量获取谱线参数时,需要在已知实验条件（浓度,温度,总压力,吸收光程以及气体分子种类的混合比等）的情况下,多次扫描同一波段范围得到多组实验室吸收光谱,然后利用基于非线性最小二乘法的拟合程序处理这些光谱,反演获得所需要的光谱参数。然而,一般常用的单光谱拟合程序处理实验光谱既费时又容易引起拟合过程中的误差传递。针对此问题,采用最小二乘拟合技术和Levenberg-Marquardt迭代算法编写了一款适用于处理由可调谐半导体激光吸收光谱技术（TDLAS）所获得的吸收光谱的多光谱拟合程序。该程序可同时处理多张实验光谱,并基于全局拟合方法获得一套光谱参数。详细介绍了该程序的原理、使用方法及数据处理过程。利用多光谱拟合程序中的Voigt线型处理了2 958～2 959 cm-1波数内甲烷（12CH₄）分子6条跃迁谱线的实验光谱,获得了296.0,251.0,223.0,198.0和173.0 K共5组温度下12CH₄分子6条谱线的空气展宽系数。与之前文献报道的该波段内采用单光谱拟合程序得到的相应数据对比结果表明：获得的各温度下的空气展宽系数与参考文献中相应数据差值的百分比处在-4.97%~1.58%之间,两者数据整体符合较好,并且在30组对比数据中,有4组由单光谱拟合程序得到的空气展宽系数的误差值小于由多光谱拟合程序得到的相应数值,有2组数据显示由两种方法获得的误差值相等,其余24组由多光谱拟合程序获得的数据拟合误差小于由单光谱拟合程序获得的相应数值,表明多光谱拟合程序具有良好的可靠性,适用于气体分子吸收光谱的处理。     

ZnMgO/ZnO异质结构中二维电子气的研究

论文根据ZnMgO/ZnO异质结构二维电子气的能带结构及相关理论模型, 采用一维Poisson-Schrodinger方程的自洽求解, 模拟计算了ZnMgO/ZnO异质结构中二维电子气的分布及其对ZnMgO势垒层厚度及Mg组分的依赖关系. 研究发现该异质结构中ZnMgO势垒层厚度存在一最小临界值: 当垒层厚度小于该临界值时, 二维电子气消失, 当垒层厚度大于该临界值时, 其二维电子气密度随着该垒层厚度的增加而增大; 同时研究发现ZnMgO势垒层中Mg组分的增加将显著增强其二维电子气的行为, 导致二维电子气密度的明显增大; 论文对模拟计算获得的结果与相关文献报道的实验结果进行了比较, 并从极化效应和能带结构的角度进行了分析和讨论, 给出了合理的解释. 关键词： 氧化锌 二维电子气 异质结构 理论计算     

Two-dimensional nutation exchange NQR spectroscopy: direct determination of rotational angles

A new method for the direct determination of rotational angles based on 2-dimensional nutation exchange NQR spectroscopy is proposed. The method involves the detection of exchange processes through NQR nutation spectra recorded after the mixing interval. The response is analysed of a system of spins I = 3/2 in zero applied field, experiencing electric quadrupole couplings, to the three-pulse sequence with incrementing pulse widths. The systems investigated here were hexachloroethane and tetrachloroethylene, which show threefold and twofold reorientational jumps about the carbon-carbon axis, respectively. It is shown that the 2D nutation exchange NQR spectrum exhibits characteristic ridges, which reveal the motional mechanism in a model-independent fashion. The angles through which the molecule rotates can be read directly from elliptical ridges in the 2D spectrum, which are also sensitive to the value of asymmetry parameter of the electric field gradient tensor.     

强流ECR离子源引出系统研究

为了提高强流ECR 离子源的引出束流品质,分别设计了1# 和2# 引出系统,利用束流引出模拟软件PBGUNS 对1# 和2# 引出系统进行了质子束流引出与传输的模拟计算,结合实际测得的发射度数据分析引出系统,发现2# 引出系统比1# 引出系统引出束流品质高。对ECR 离子源引出系统的电势等位线分布等参数引起的球差进行了简单数学推导及MATLAB 绘图,并结合1# 和2# 引出系统束流相图模拟结果证明了球差会使引出束流品质有效发射度增长,通过适当加大电极孔径可改善束流聚焦情况,得到了束流光学聚焦较好的束流引出系统设计。To improve the quality of extracted ion beam from a high current ECR ion source, 1# and 2# extraction systems were designed and tested. The PBGUNS code was used to simulate the 1# and 2# extraction systems of proton ion beam. The emittance measurement results with the two different extraction systems were compared and analyzed with the simulation, the conclusion that more high quality beam extracted from 2# system than 1# system was got. The formula derivation of ECR ion source extraction system spherical aberration and MATLAB drawing was done by the analyzing on the distribution of extraction field equipotentials, effective emittance increasing caused by spherical berration was proved by 1# and 2# extraction systems beam phase space simulation result, beam focusing would be improved if electrode hole size increasing appropriately and a general concept on good optics focusing of ion beam extraction system was proposed finally.     

Selection of optimal combinations of inputs in a partial least squares model for prediction of soil organic matter

Abstract

Partial least squares model is widely used in estimation of soil physical and chemical parameters such as soil organic matter and moisture content, due to its advantages in dealing with collinearity of variables like hyperspectral reflectance. However, it is hard to determine optimal combination of partial least squares model input for soil organic matter prediction since there are lots of possibilities such as, different mathematical transformation of spectral reflectance, wavelength ranges, and spectral resolution. Laboratory hyperspectral reflectance of soils in Songnen plain were analyzed in this study, and the orthogonal experimental design method for deriving optimal combination of input variables for soil organic matter prediction models was introduced. For intercalating orthogonal experimental design table, five different levels which commonly used by researchers were assigned to factors. Results show that the optimal combination input for single black soil is using the derivative logarithmic reciprocal reflectance in the wavelength range selected by multiple stepwise regression at a spectral resolution of 5?nm (R²=?0.95, RMSE?=?0.21, and RPD?=?4.49), and different soils is using continuum removed in the wavelength range selected by MSR at a spectral resolution of 5?nm (R²?=?0.77, RMSE?=?0.74, and RPD?=?2.08). With optimal combination input, the partial least squares model prediction ability was evaluated as excellent for single black soil, possible for different soils. This study illustrates the orthogonal experimental design method can be an effective way to identify the optimal input variables of a partial least squares model for soil organic matter prediction, and multiple stepwise regression can be a preprocessing step to reduce hyperspectral data redundancy before using partial least squares to predict soil organic matter. Overall, this study provides a new approach for determining optimal input of partial least squares predicting model.     

透射电子显微镜样品的电解抛光制备方法

在电解抛光过程中用透射和反射光作显微镜观察,借以监视抛光样品,使获得最佳抛光条件。电路中采用了间歇电流装置,使抛光条件更易于控制。样品制备的成功率和重复性有所提高。制备了一些超导材料和非晶质材料的透射电子显微镜样品,拍摄了透射电子显微镜和选区电子衍射照片。 关键词：     

纳米金属氧化物：复合分散法制备及分散性

通过采用水热晶化与荷电复合分散法制备γ-AlOOH、R-TiO₂和α-Al₂O₃纳米晶体粉末,利用TEM和激光粒度分析仪等手段研究了纳米颗粒水热晶化与荷电复合分散的分散效果及其工艺条件,并探讨了金属氧化物纳米颗粒水热晶化与荷电复合分散机理。结果表明,晶化与荷电复合分散可明显改善金属氧化物纳米颗粒在液相中的分散稳定性,所制得的AlOOH、TiO₂和Al₂O₃纳米颗粒在水中分散放置24 h后的透光率的变化率D₂₄还可分别保持为94.1%、87.7%和82.2%;在水中分散后的粒径分布统计的平均粒径分别为67、70和143 nm。     

关于全图补图的完美匹配

G是一个简单图,变换图G---是G的全图的补图.证明了对于给定的一个图G,G K1 K2,G---有一个完美匹配的充要条件是V(G) E(G)是偶数.     

基于多线程技术的智能小区管理服务系统构建

设计并实现了一个由485网络构成的智能小区数据采集、控制及管理服务系统,该系统能实现抄表、安防和物业管理等功能,对该系统的整体结构做了介绍,并讨论了中心主机管理服务系统软件的两大模块——通信引擎和管理平台,其中详细分析了多线程技术在通信引擎中的重要作用．