Structure–electrical property study of anisotropic polyaniline films

The relationships of the structure and electrical properties of anisotropic HCl‐doped polyaniline (PANI) films cast from N,N′‐dimethylpropylene urea (DMPU) solutions and stretched to different draw ratios were studied. The anisotropic structure of the stretched PANI films was examined by X‐ray diffraction, near‐infrared wave‐guide coupling, and polarized infrared measurements. The PANI emeraldine base (EB) films cast from DMPU solutions had a single‐phase noncrystalline structure, and stretching of the films did not cause crystallization to occur. The transition moment angles of two weakly absorbing infrared bands were determined, and the Hermans' orientation functions for the PANI EB films were calculated. The PANI films were then doped with HCl, and the electrical properties were determined by impedance spectroscopy. With a specially designed test fixture, the in‐plane and through‐plane impedance was obtained. The conductivity along the stretch direction increased with orientation. The in‐plane conductivity was significantly higher than the through‐plane conductivity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 823–841, 2003     

Magnetic properties of lanthanum orthoferrite fine powders prepared by different chemical routes

Fine powders of lanthanum iron oxide, LaFeO₃, have been prepared by solid state reaction as well as sol-gel synthesis and nebulized spray pyrolysis. Structures, morphologies and magnetic susceptibility measurements of these powders have been examined. The powders prepared by all the three low-temperature routes contain nearly spherical particles with an average diameter of 40 nm. These samples show a lower Neel temperature than the powder prepared by solid state reaction besides showing much lower magnetic susceptibility at low temperatures. Dedicated to Professor C N R Rao on his 70th birthday     

Novel route to synthesis of allyl starch and biodegradable hydrogel by copolymerizing allyl‐modified starch with methacrylic acid and acrylamide

Maize starch was modified by allyl chloride adopting an interfacial reaction technique with cetyltrimethyl ammonium bromide as a phase‐transfer catalyst and pyridine as an acid acceptor. The degree of substitution was determined from an increasing carbon content of the modified starch. The percentage of carbon and hydrogen of the allyl‐modified starch was estimated by elemental analysis (C, H, and N), and the product characterization was done through ¹H NMR and ¹³C NMR analyses. The allyl‐modified starch was then copolymerized with methacrylic acid and a combination of methacrylic acid and acrylamide at 50 and 70 °C with potassium persulfate as an initiator. The copolymer thus formed swelled in distilled water after neutralization with sodium carbonate. The percentage of absorption capacity of the hydrogels was determined with distilled water and 0.9% NaCl solution. The highest percentage of absorption, 6500%, was achieved for the developed hydrogel containing allyl starch and acrylic monomer in a 1.7:1 w/w ratio and acrylic monomer, namely, methacrylic acid and acrylamide in a 3.2:1 w/w ratio. The study on biodegradability of the developed hydrogel showed that the hydrogel is degradable in the presence of diastase (amylase). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1650–1658, 2003     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

On Linear Chains of Blow-Ups Related to the Jacobian Conjecture

Mathematical Notes -     

Crystallographic report: Crystal structure of 1‐bromo‐1′‐[(2S)‐N‐(1‐hydroxy‐3‐methylbutane‐2‐yl)]‐ferroceneamide

For the unsymmetrical title compound, 1‐bromo‐1′‐[(2S)‐N‐(1‐hydroxy‐3‐methylbutane‐2‐yl)]‐ferroceneamide, two independent molecules were found in the asymmetric unit. Copyright © 2003 John Wiley & Sons, Ltd.     

Energy and Acid-Base Characteristics of the Surface of Nitramine Fillers for Polymeric Composites

Single crystals of nitramine fillers for special-purpose polymeric composites are characterized by the surface energy and its constituents and also by the acidity of their surface.     

Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

Ionization of two-electron atom in ultrashort laser pulse

The method of numerical integration of the classical equations of motion was used to study interaction of a model two-electron atom with ultrashort laser pulses. Mechanisms and specific features of the ionization process were analyzed in a broad range of laser-field parameters.