Condensation film on an inclined rotating disk

The three dimensional problem of steady fluid deposition on an inclined rotating disk is solved by similarity transform. For a given spraying rate there may be one, two or no steady state solution. The inclination causes a downward draining flow and a lateral flow. Perturbation solutions compare well with exact similarity solutions when the fluid film is thin.     

Einstein relation in chemically doped organic semiconductors

Based on the assumption of Gaussian energy distributions of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO), analytical expressions of generalized Einstein relation in chemically doped organic semiconductor are developed, by approximation of Coulomb traps with a rectangle potential well. Numerical calculations show that traditional Einstein relations do not hold for chemically doped organic semiconductors. Similar to physical doping, the dependence of diffusion coefficient to mobility D/μ ratio on the carrier concentration has a maximum. An essential difference between chemical doping and physical doping is that, the D/μ ratio in chemically doped organic semiconductors depends not only on carrier concentration and doping concentration, but also on the applied electric field. PACS 71.20.Rv; 72.90.+y; 73.50.-h     

System dependence of the correlation function of IMFs in Ar + Sn at 35 MeV/u

The inclusive reduced velocity correlation functions of the intermediate mass fragments were measured in the reactions of ³⁶Ar + ^112,124Sn at 35 MeV/u. The anti-correlation is observed to be stronger in ³⁶Ar + ¹²⁴Sn system than that in ³⁶Ar + ¹¹²Sn. The difference of the correlation functions between the two reactions is mainly contributed by the particle pairs with high momenta. A three body Coulomb repulsive trajectory model is employed to calculate the emission time scale of the IMFs for the two systems. The time scale is 150 fm/c in ³⁶Ar + ¹¹²Sn and 120 fm/c in the ³⁶Ar + ¹²⁴Sn, respectively.     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

Convergence rates for Markov chain order estimates using EDC criterion

The Efficient Determination Criterion (EDC) generalizes the AIC and BIC criteria and provides a class of consistent estimators for the order of a Markov chain with finite state space. In this note, we derive rates of convergence for the EDC estimates. *Partially supported by CNPq, CAPES/PROCAD, FAPDF/PRONEX, FINATEC and FUNPE/UnB. **Partially supported by CAPES.     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.     

Laser-sintered mesoporous TiO2 electrodes for dye-sensitized solar cells

Low-temperature laser sintering has been successfully demonstrated to improve the overall conversion efficiency of dye-sensitized solar cells. Mesoporous TiO₂ electrodes were prepared from a colloidal solution of TiO₂ nanopowders by a laser direct-write technique and then sintered by a quasi-continuous-wave UV laser (λ=355 nm) for the fabrication of dye-sensitized solar cells. The overall conversion efficiency of the cells based on the laser-sintered TiO₂ electrodes was double that of the devices with non-laser-treated TiO₂ electrodes. This enhancement is attributed to both the removal of organic additives and the improved inter-nanoparticle electrical contacts induced by the laser-sintering process, which led to an increase in porosity and dye-absorption sites in the TiO₂ electrodes. PACS 61.80.Ba; 61.46.+w; 73.22.-f; 84.60.Jt     

Asymmetric responses of international stock markets to trading volume

The major goal of this paper is to examine the hypothesis that stock returns and return volatility are asymmetric, threshold nonlinear, functions of change in trading volume. A minor goal is to examine whether return spillover effects also display such asymmetry. Employing a double-threshold GARCH model with trading volume as a threshold variable, we find strong evidence supporting this hypothesis in five international market return series. Asymmetric causality tests lend further support to our trading volume threshold model and conclusions. Specifically, an increase in volume is positively associated, while decreasing volume is negatively associated, with the major price index in four of the five markets. The volatility of each series also displays an asymmetric reaction, four of the markets display higher volatility following increases in trading volume. Using posterior odds ratio, the proposed threshold model is strongly favored in three of the five markets, compared to a US news double threshold GARCH model and a symmetric GARCH model. We also find significant nonlinear asymmetric return spillover effects from the US market.     

Re-hardening of hadron transverse mass spectra in relativistic heavy-ion collisions

We analyze the spectra of pions and protons in heavy-ion collisions at relativistic energies from 2 A GeV to 65+65 A GeV by using a jet-implemented hadron-string cascade model. In this energy region, hadron transverse mass spectra first show softening until SPS energies, and re-hardening may emerge at RHIC energies. Since hadronic matter is expected to show only softening at higher energy densities, this re-hardening of spectra can be interpreted as a good signature of the quark-gluon plasma formation