Interaction between model poly(ethylene terephthalate) thin films and weakly ionised oxygen plasma

Model films of poly(ethylene terephthalate) were treated by oxygen plasma in order to quantify the etching rate and estimate the contribution of charged and neutral particles to the reaction probability. Model films with a thickness of 50 nm were deposited on a quartz crystal of a microbalance (QCM) by spin‐coating technique. The samples were exposed to oxygen plasma with the positive ion density of 4 × 10¹⁵ m^?3 and neutral oxygen atom density of 6 × 10²¹ m^?3. The etching rate was determined from the QCM signal and was 4.7 nm s^?1. The etching was found rather inhomogeneous as the atomic force microscopic images showed an increase of the surface roughness as a result of plasma treatment. The model films were completely removed from the surface of the quartz crystals in about 12 s. Knowing the etching rate and the flux of oxygen atoms to the surface allowed for calculation of the reaction probability which was found to be rather low at the value of 1.6 × 10^?4. Copyright © 2011 John Wiley & Sons, Ltd.     

Wettability of pristine and alkyl-functionalized graphane

Graphane is a hydrogenated form of graphene with high bandgap and planar structure insensitive to a broad range of chemical substitutions. We describe an atomistic simulation approach to predict wetting properties of this new material. We determine the contact angle to be 73°. The lower hydrophobicity compared to graphene is explained by the increased planar density of carbon atoms while we demonstrate that the presence of partial charges on carbon and hydrogen atoms plays only a minor role. We further examine the effects of graphane functionalization by alkyl groups of increasing chain lengths. The gradual increase in contact angle with chain length offers a precise control of surface wettability. A saturated contact angle of 114° is reached in butylated form. We find the saturation of contact angle with respect to the length of the functional groups to coincide with the loss of water's ability to penetrate the n-alkyl molecular brush and interact with carbon atoms of the underlying lattice. Since no experimental data have yet become available, our modeling results provide the first estimate of the wettability of graphane. The results also show how its alkyl functionalization provides the basis for a variety of chemical modifications to tune hydrophilicity while preserving the planar geometry of the substrate.     

Etching of polyethylene terephthalate thin films by neutral oxygen atoms in the late flowing afterglow of oxygen plasma

Films of polyethylene terephthalate were deposited on quartz crystals and exposed to oxygen atoms to study their etching characteristics and quantify the etching rate. Oxygen (O) atoms were created by passing molecular oxygen through plasma created in a microwave discharge. The discharge power was fixed at 250 W, while the pressure of oxygen was 50 Pa. Before exposure to oxygen atoms, a thin polymer film of polyethylene terephthalate (PET) was deposited uniformly over a crystal with a diameter of 12 mm. The crystal was mounted on a quartz crystal microbalance to accurately determine the thickness of the polymer film. The polymer film was exposed to O atoms in the flowing afterglow. The density of O atoms was measured with a cobalt catalytic probe mounted next to the sample and was determined to be 1.2 × 10²¹ m^–3. Samples were treated with O atoms for different periods of up to 120 min. The thickness of the film decreased linearly with treatment time. After 90 min of treatment, a 65‐nm‐thick polymer film was completely removed. Therefore, the etching rate was 0.5 nm/min, so the interaction probability between an O atom and an atom in the sample was extremely low, just 1.4 × 10^–6. Samples treated for different periods were investigated by atomic force microscopy and X‐ray photoelectron spectroscopy to examine the etching characteristics of O atoms in the flowing afterglow. Copyright © 2012 John Wiley & Sons, Ltd.     

Theoretical and fuzzy modelling of a pharmaceutical batch reactor

This paper deals with the development of a batch-reactor model with a theoretical and a locally affine fuzzy model. The batch reactor is used in the pharmaceutical industry for the production of drugs, where a rapid and precise temperature control is necessary. The model has to be built to include all the main features necessary for the purposes of modelling. The development of the model for the reactor is designed for further control development and simulation purposes, without doing any further experiments on the real process. In our case we use the model for simulating the reactor’s jacket temperature and the reactor’s core temperature. The theoretical model describes all the nonlinearities of the process of heating and cooling the content of the batch reactor. The main contribution of the theoretical model is in the modelling of the heat transfer between the reactor’s jacket and the reactor’s core, mainly caused by the change in the overall heat transfer, which also covers the main nonlinearity. Because of the complexity of the theoretical model a locally affine fuzzy model is also developed.     

Analytical Uncertainty in Modern Quantitative TLC

JPC – Journal of Planar Chromatography – Modern TLC - Experiments and calculations show the importance of analytical management to reliable analytical results. A method with a...     

The effect of plasma treatment on structure and properties of poly(1-butene) surface

This paper is focused on the chemical and morphology changes in the surface of poly(1-butene) (PB-1) generated by plasma treatment. The radio frequency capacitively coupled plasma (air, argon, argon then allylamine, argon containing ammonia and argon with octafluorocyclobutane) was used. Modified surface of PB-1 was characterized by contact angle measurements, X-ray photoelectron spectroscopy, and atomic force microscopy. The surface hydrophilization by air and argon with ammonia plasmas was evaluated as most sufficient. Oppositely, a high level of hydrophobicity of PB-1 surface was reached by combination of argon with octafluorocyclobutane plasma. Upon plasma modification, hydrophilicity/hydrophobicity of treated surfaces remained stable within three days under air atmosphere and then values of contact angle slowly recovered to those of unmodified PB-1. However, morphology and surface chemical composition of plasma-modified samples remained generally unchanged during observed time. Changes in surface hydrophilicity/hydrophobicity of plasma-treated PB-1 were attributed to variance of conformation of the surface molecules.     

Mechanisms Involved in the Modification of Textiles by Non-Equilibrium Plasma Treatment

Plasma methods are often employed for the desired wettability and soaking properties of polymeric textiles, but the exact mechanisms involved in plasma–textile interactions are yet to be discovered. This review presents the fundamentals of plasma penetration into textiles and illustrates mechanisms that lead to the appropriate surface finish of fibers inside the textile. The crucial relations are provided, and the different concepts of low-pressure and atmospheric-pressure discharges useful for the modification of textile’s properties are explained. The atmospheric-pressure plasma sustained in the form of numerous stochastical streamers will penetrate textiles of reasonable porosity, so the reactive species useful for the functionalization of fibers deep inside the textile will be created inside the textile. Low-pressure plasmas sustained at reasonable discharge power will not penetrate into the textile, so the depth of the modified textile is limited by the diffusion of reactive species. Since the charged particles neutralize on the textile surface, the neutral species will functionalize the fibers deep inside the textile when low-pressure plasma is chosen for the treatment of textiles.     

Recombination of hydrogen atoms on fine-grain graphite

The probability of recombination of hydrogen atoms on surfaces of fine-grain graphite EK98 was investigated as a function of surface roughness. The source of hydrogen atoms used in this experiment was weakly ionised plasma created with an inductively coupled radiofrequency generator at pressures from 30 Pa to 175 Pa in hydrogen. Hydrogen atom density was measured by means of fibre optic catalytic probes. The recombination coefficient of the graphite samples was determined by observing their impact on the spatial distribution of the atom density in a closed side-arm of the reactor. Smith's diffusion model was used to calculate the values of the recombination coefficient. The measured recombination coefficient was found to increase much faster than the measured effective surface. This discrepancy is explained by the fact that on a surface which is not perfectly flat, there is a finite probability for multiple collisions. Impinging atoms collide more than once with the surface before they are reflected into the surface, which results in a larger probability of recombination.