氧化藏红T褪色催化荧光法测定痕量钒

研究了在酸性介质中柠檬酸存在下，痕量钒（Ｖ）催化溴酸钾氧化藏红Ｔ的褪色反应及其动力学条件，建立了催化荧光测定痕量钒的新方法。催化反应在沸水浴中进行８ｍｉｎ，为假零级反应，反应的表观活化能力为９９．２１ｋＪ／ｍｏｌ，反应速度常数为０．１２／ｓ；该方法的检出限为２．２×１０＾－８ｇ／Ｌ；线性范围为０．２￣２．４μｇ／Ｌ研究了共存离子的影响，用于人发和煤灰中痕量钒的测定，结果令人满意。     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

The pH-dependent role of superoxide in riboflavin-catalyzed photooxidation of 8-oxo-7,8-dihydroguanosine

[reaction: see text]. The riboflavin-catalyzed photooxidation of 2',3',5'-tri-O-acetyl-8-oxo-7,8-dihydroguanosine generates a radical intermediate that is competitively trapped by H(2)O, O2(-)(*), or O(2). The products of H(2)O trapping have been previously described as the spiroiminodihydantoin (pH >or= 7) and iminoallantoin/guanidinohydantoin (pH < 7) nucleosides. Trapping by O2(-)(*) leads to the oxaluric acid (pH or= 8.6) pathways (R' ', R' ' = H or 2,3,5-tri-O-Ac-ribofuranosyl). The pH-dependent role of superoxide was probed using Mn-SOD and compared to guanosine and 8-methoxyguanosine photooxidation.     

The research on the high quality TiO2, MoO3-doped WO3 electrochromic film

The high quality TiO2, MoO3-doped WO3 electrochromic film was prepared by the sol–gel method for the first time. The sol, which has hydrogen peroxide (H2O2) and oxalic acid (H2C2O4), was very stable at room temperature and quite suitable for the deposition of films. The WO3 electrochromic film prepared from this doped sol had excellent performance, such as short response time, no cracks, good adhesion to the substrate, high coloring efficiency and longevity of service.     

有机锗（Ge—132）对交警健康作用的研究

初步观察了给交警服用Ｇｅ－１３２的效果，表明Ｇｅ－１３２有一定保健作用。     

聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

N—乙基—α—甲基—间（三氟甲基）苯乙胺的合成

本文报道了一种新的简便的合成Ｎ－乙基α－甲基－间苯乙胺的方法。方法以三氟甲苯为原料，经氯甲基化，Ｇｉｇｎａｒｄ及Ｌｅｕｃｋａｒｔ反应后得目标物，具有原料价廉易得，毒性较小，反应条件温和，工艺流程较短等特点。     

Parallel solution combustion synthesis for combinatorial materials studies

A parallel solution combustion synthesis technique was developed for combinatorial materials studies. The vigorous combustion reactions were successfully limited in the microreactors by using a substrate-net-mask microreactor system and the lowest adoptable furnace temperature. Using this technique, a luminescent materials library of Y3Al5O12/Tb(chi) was synthesized with the aid of an ink-jet delivery system. Structure and luminescence characterizations were implemented using X-ray diffraction and UV/X-ray spectroscopies, respectively. The results show that this technique is reliable and applicable to combinatorial study of powder materials with high synthesis temperature.     

纳米多孔双金属氧化物在镍钛合金纤维上的原位生长及其对多环芳烃的选择性固相微萃取

采用阳极氧化法在镍钛合金(NiTi)纤维上原位生长了双金属氧化物纳米孔(NiTiONPs)涂层,通过扫描电镜(SEM)和能谱(EDS)考察了电解质组成和电压对形貌的影响。将NiTiONPs涂层的NiTi纤维与高效液相色谱-紫外检测器联用,研究了4种典型芳香分析物的萃取性能。结果表明,富含TiO2的NiTiONPs涂层对多环芳烃(PAHs)具有良好的萃取效率,尤其对苯并[a]芘的萃取选择性优于市售聚二甲基硅氧烷纤维和聚丙烯酸酯纤维。在优化条件下,PAHs的线性范围为0.05~200μg/L,相关系数均大于0.999,检出限为0.012~0.134μg/L。对单支纤维日内和日间分析的相对标准偏差(RSDs)分别为4.0%~5.5%和6.0%~6.8%,使用分批组装的5支纤维分析的RSDs为6.4%~7.6%。实际水样分析的加标回收率为84.5%~111.5%。所制备NiTi纤维至少可重复使用250次以上,重现性好。     

二氧化碳同环氧丙烷交替共聚用催化剂的研究

探讨了有机金属催化剂的组成及其对二氧化碳同环氧丙烷交替共聚产物结构的影响,发现二乙基锌—助剂体系的催化活性按如次顺序递降:二乙基锌—连苯三酚>二乙基锌—间苯二酚>二乙基锌—对苯二胺>二乙基锌—亚乙基脲。若用三异丁基铝代替二乙基锌同连苯三酚构成催化剂,则失去对二氧化碳同环氧丙烷交替共聚反应的活性同时,著者发现二乙基锌—二元芳胺催化体系与二乙基锌—二元酚催化体系的催化活性规律完全不同。