New Approaches to the Creation of Nanocomposite Anode Materials Based on PbO2: A Review

Theoretical and Experimental Chemistry - An original approach to the creation of new nanocomposite anode materials based on PbO2 and to the processes of composite formation due to the influence of...     

Nitroxide‐Mediated Polymerization of Bio‐Based Farnesene with a Functionalized Methacrylate

Farnesene (Far) is a bio‐based terpene monomer that is similar in structure to commercially used dienes like butadiene and isoprene. Nitroxide‐mediated polymerization (NMP) is adept for the polymerization of dienes, but not particularly effective at controlling the polymerization of methacrylates using commercial nitroxides. In this study, Far is statistically copolymerized with a functional methacrylate, glycidyl methacrylate (GMA), by NMP using N‐succinimidyl modified commercial BlocBuilder (NHS‐BB) initiator. Reactivity ratios are determined to be r _Far = 0.54 ± 0.04 and r _GMA = 0.24 ± 0.02. The ability of the poly(Far‐stat‐GMA) chains to reinitiate for chain extension with styrene showed a clear shift in molecular weight and monomodal distribution. Copolymerizations using a new alkoxyamine, Dispolreg 007 (D7), is explored as it is shown to homopolymerize methacrylates, but not yet reported for statistical copolymerizations. Bimodal molecular weight distributions are observed when an equimolar ratio of Far and GMA is copolymerized with D7 due to slow decomposition of the initiator, but chain ends are active as shown by successful chain extension with styrene. Both NHS‐BB and D7 initiators are used to synthesize poly[Far‐b‐(GMA‐stat‐Far)] and poly(Far‐b‐GMA) diblock copolymers. While the NHS‐BB initiated polymer chains have lower dispersity, D7 exhibits more linear polymerization kinetics and maintains more active chain ends.     

Analysis of cement and cement raw meal by atomic absorption spectrophotometry using a new fusion agent

A new fusion agent is proposed for the analysis of cement and cement raw meal using AAS. In the described method, 0.8 g of the fusion agent, consisting of equal portions of oxalic acid, lithium carbonate and lithium tetraborate, was mixed with 0.2 g of the sample, and the mixture was fused for 10 min at 925 degrees C in a platinum crucilbe. The fusion cake was dissolved with dilute hydrochloric acid (1 + 10) and diluted to 500 ml for the determination of Si, Al, Fe, Ti, Na and K expressed as SiO(2), Al(2)O(3), Fe(2)O(3), TiO(2), Na(2)O, and K(2)O respectively. For the determination of Ca and Mg (expressed as CaO and MgO respectively), 10 ml of the previous sample solution were mixed with 4 ml of 6% (m/v) lanthanum nitrate solution and the solution was diluted to 100 ml. The method was found to have good accuracy and precision. The time required to determine the eight elements was around 80 min for each sample.     

An efficient palladium-benzimidazolyl phosphine complex for the Suzuki-Miyaura coupling of aryl mesylates: facile ligand synthesis and metal complex characterization

A new class of easily accessible hemilabile benzimidazolyl phosphine ligands has been developed. The ligand skeleton is prepared from commercially available and inexpensive o-phenylenediamine and 2-bromobenzoic acid. With catalyst loading down to 0.5 mol% palladium, excellent catalytic activity towards the Suzuki-Miyaura coupling of aryl mesylates is still observed. This represents the lowest catalyst loading achieved so far for this reaction in general. X-Ray crystallography shows that new ligand L2 is coordinated with Pd in a κ(2)-P,N fashion.     

Average orientation of a molecular rotor embedded in a Langmuir-Blodgett monolayer

A molecular rotor in which a naphthalene rotator is attached through a silicon atom to three fatty acid chains has been synthesized, and Langmuir-Blodgett techniques were used to deposit on silica surfaces monolayers of its calcium salt, both neat and diluted with stearic acid salts. The monolayer films have been characterized by ellipsometry and Fourier transform infrared (FT-IR) grazing-incidence attenuated total internal reflection (GATR) spectroscopy on Si-SiO(2) and by UV-vis absorption spectroscopy on SiO(2). The measurements were combined with calculations of the electronic (INDO/S) and vibrational (DFT) transition moment directions to deduce the average orientation of the rotor molecules, including the naphthalene ring, relative to the surface. In both neat and mixed films, the naphthalene ring is found to preferentially tilt toward the surface, enough that its rotation is most likely hindered. A comparable picture was obtained from molecular mechanics calculations on a mixed film of the naphthalene rotor and stearic acid.     

Identification of wine provenance by ICP-AES multielement analysis

We have estimated the possibility of identifying the provenance of some natural wines produced in the Krasnodar region. The macro- and microelement composition of wines and soils from the place of grape origin has been used as the classification criterion. The main elements indicating the wine provenance, Al, Co, Cu, Mn, Ti, Zn, Ba, and Rb have been determined by inductively coupled plasma atomic emission spectroscopy. We have revealed the possibility of distinguishing wines by their brand and provenance using pair-wise comparison of the classification function parameters for soils and wines produced from grape grown on those soils.     

Synthesis and properties of macrocyclic diazene switch with binaphthalene unit attached via acrylamide linkers

2,2′-Diiodo-1,1′-binaphthalene undergoes a tandem Heck reaction with methyl acrylate to afford methyl 2-(7H-dibenzo[c,g]fluoren-7-ylidene)acetate. As a consequence, the target macrocyclic diazene with binaphthalene unit attached via acrylamide linker was prepared by the stepwise building of acrylamide at a binaphthalene moiety, including the Doebner modification of the Knoevenagel condensation, and completed by oxidative macrocyclisation of aniline end-groups. Despite being an equimolar mixture of monomer and dimer, it exhibited remarkable changes in CD spectra due to reversible (E/Z) isomerisation of N=N diazene bonds upon irradiation at 365/465 nm. Although the dimer isomerises from (E) to (Z) isomer 7.4 times faster than the monomer, the latter’s contribution to the change in ellipticity at 307 nm in the photostationary state is 2.4 times greater.     

Applicability of photochemically generated pendant benzoyl peroxides in both “grafting from” and “grafting to” techniques

Methyl methacrylate and styrene copolymers containing pendant benzil groups, such as 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-methyl metacrylate (BzMA/MMA), 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-styrene (BzMA/S), and 1-phenyl-2-(4-propenoylphenyl)-1,2-ethanedione-co-styrene (PCOCO/S), were prepared and used as precursors for photochemically generated pendant benzoyl peroxides. Decomposition of the pendant benzoyl peroxides was subsequently used in grafting processes. Either irradiation or a combination of irradiation with subsequent thermal treatment was adopted for grafting a thin layer of BzMA/MMA copolymer onto the surface of LDPE films. The grafting resulted in a significant decrease in contact angle of the film surface. The same activation strategy was successfully adopted to initiate the polymerisation of acrylic or methacrylic acids from the surface of styrene copolymer films containing the initiator precursor in the polymer side chains (BzMA/S and PCOCO/S). The successful surface grafting was proved by contact angles measurement as well as by infrared spectroscopic analysis.     

Detection of acetaminophen using cyclic voltammetry on MnFe2O4/polyaniline

A novel sensing material, MnFe₂O₄/polyaniline (PANI), was fabricated by doping PANI to MnFe₂O₄ on a modified glassy carbon electrode (GCE). This sensing material was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), and high‐resolution transmission electron microscopy (HR‐TEM). Using a cyclic voltammetry electrochemical‐sensing method, we tested MnFe₂O₄/PANI, and an acetaminophen concentration of 0.0625–5 mM was recorded. Furthermore, the sensor responses were 2.05–22.44. The detection limit was 2.23 × 10^?7 M. Strong selectivity was observed for MnFe₂O₄/PANI, which is a possible sensing mechanism.