Copper-catalyzed dimerization of chromium Fischer carbene complexes: synthesis of dialkoxytrienes and their Nazarov-type cyclization to 2-alkoxy-2-cyclopentenones

Fischer carbene complexes 1 underwent a clean ligand dimerization reaction yielding functionalized olefins and trienes 4 in the presence of copper (I) catalysts. If treated with trifluoroacetic acid (TFA), trienes 4c, d, f undergo a cyclization process (Nazarov reaction) which furnishes cyclopentenone derivatives 6c, d, 7c, d and 8 in good yields. Finally, the Fischer aminocarbene 9 efficiently cyclodimerizes to the substituted arene 10 in the presence of CuBr.     

Role of anions on the crystal structures of copper(II) and zinc(II) complexes of a tunable butterfly cyclophane macrocycle

Three crystal structures of a ditopic cyclophane ligand (L) in which two 1,5,8,12-tetraamine molecules have been attached through methylene spacers to the ortho positions of a benzene ring are reported. The first one (1) corresponds to the tetraprotonated free macrocycle (H4L4+) having two tetrachlorozincate(II) counteranions (C24H54O2N8Cl8Zn2, a = 9.1890(2) A, b = 14.0120(3) A, c = 15.3180(3) A, alpha = 89.2320(7) degrees , beta = 82.0740(6) degrees , gamma = 83.017(1) degrees , Z = 2.00, triclinic, P); the second one (2) is of a binuclear Cu2+ complex having coordinated chloride anions and perchlorate counteranions (C24H58O14N8Cl4Cu2 a = 9.9380(2) A, b = 30.2470(6) A, c = 53.143(1) A, orthorhombic, F2dd, Z = 18), and the third one (3) corresponds to an analogous Zn2+ complex that has been crystallized using triflate as counteranion (C26H(51.2)O(6.6)N8Cl2F6S2Zn2 a = 8.472(5) A, b = 9.310(5), c = 13.745(5) A, alpha = 84.262(5) degrees , beta = 77.490(5) degrees , gamma = 73.557(5) degrees , triclinic, P, Z = 2). The analysis of the crystallographic data clearly shows that the conformation of the macrocycle and, in consequence, the overall architecture of the crystals are controlled by the anions present in the moiety, pi-pi-stacking associations, and hydrogen bonding interactions. The protonation and stability constants for the formation of the Cu2+ and Zn2+ complexes in aqueous solution have been determined potentiometrically in 0.15 mol dm(-3) NaClO4 at 298.1 K. Intramolecular hydrogen bonding defines the protonation behavior of the compound. Positive cooperativity is observed in the formation of the Cu2+ complexes.     

Synthesis, characterization, biocide and toxicological activities of di-n-butyl- and diphenyl-tin(IV)-salicyliden-beta-amino alcohol derivatives

The one pot reaction of salicylaldehyde 1, beta-amino alcohols 2a-2c, and di-n-butyltin(IV) oxide 3a or diphenyltin(IV) oxide 3b produced five diorganotin(IV) compounds, 4a-4c, 5a, and 5c, in good yields. All compounds were characterized by IR, (1)H, (13)C, and (119)Sn NMR spectroscopy, and elemental analysis; furthermore, compounds 4b, 4c, 5a, and 5c were characterized by X-ray diffraction analysis. After the structural characterization, all of the compounds were tested in vitro against Bacillus subtilis (Gram-positive, strain ATCC 6633), Escherichia coli (Gram-negative, strain DH5alpha), Pseudomonas aeruginosa (Gram-negative, strain BH3), Desulfovibrio longus (strain DSM 6739), and Desulfomicrobium aspheronum (strain DSM 5918) to assess their antimicrobial activity. Compounds 4 and 5 demonstrated a wide range of bactericidal activities against the tested aerobic (one Gram-positive and two Gram-negative subtypes) and anaerobic bacteria (two sulfate-reducing bacteria, SRB). Compound 5 had better bactericidal performances than compound 4. For all of the compounds, the acute toxicity was measured using luminescent bacteria toxicity (LBT-Microtox) tests to track their further environmental impact. According to these results and in order to fulfill environmental regulations, the toxicity of the compounds studied herein can be modulated through the proper selection of the disubstituted tin(IV) moiety.     

Constituents of labiatae—XIV: Vierol and powerol,two new diterpenes from Sideritis canariensis

The two new diterpenes, vierol (1) [(?)kaurane-16α,18-diol] and powerol (3) [(?)kaurane-7β,16α-diol] have been isolated from Sideritis canariensis Ait. 1 was obtained by partial synthesis from epicandicandiol (7), and 3 was related with (?)kauranol (6) and (?)kauren-7β-ol acetate (11). Reduction of the acetoxy-aldehyde 14 by the method of Huang-Minlon and posterior acetylation gave 11, (?)isokauren-7β-ol acetate (17) and (?)kauran-7β-ol acetate (18).     

Soluble and polymer-supported 2- and 3-benzylated furans for the preparation of α,β-ethylenic carbonyl compounds

Soluble and polymer-supported 2- and 3-benzylated furans were subjected to a sequence involving a Diels-Alder reaction with α,β-acetylenic carbonyl compounds, a Michael addition, and a subsequent retro-Diels-Alder reaction to yield olefinic compounds. On solid support, this traceless strategy is advantageous since pure compounds were released in the thermal cycloreversion step. The fur-2-ylated resin allowed a highly diastereoselective synthesis.     

Adhesion and debonding of soft elastic films: crack patterns, metastable pathways, and forces

We study the phenomenon of debonding in a thin soft elastic film sandwiched between two rigid plates as one of the plates is brought into intimate contact and then pulled away from contact proximity by application of a normal force. Nonlinear simulations based on minimization of total energy (composed of stabilizing elastic strain energy and destabilizing adhesive interaction energy) are employed to address the problems of contact hysteresis, cavitation, crack morphology, variation of contact area, snap-off distance, pull-off force, work done, and energy loss. Below a critical distance (d(c)) upon approach, simulations show the formation of columnar structures and nonrandom, regularly arranged nanocavities at the soft interface at a length scale of approximately 3h (h being the thickness of the film). The persistence of such instability upon withdrawal (distance >d(c)) indicates a contact hysteresis, which is caused by an energy barrier that separates the metastable states of the patterned configuration and the global minimum state of the flat film. The energy and the pull-off force are found to be nonequilibrium and nonunique properties depending on the initial contact, defects, noise, etc. Three broad pathways of debonding leading to adhesive failure of the interface, depending on the stiffness of the film, step size of withdrawal, and the imposed noise, are identified: a catastrophic column collapse mode, a peeling mode involving a continuous decrease in the contact area, and a column splitting mode. The first two modes are caused by a very high stress concentration near the cavity edges. These metastable patterned configurations engender pull-off forces that are orders of magnitude smaller than that required to separate two flat surfaces from contact.     

Construction of triangular metallomacrocycles: [M3(1,2-bis(2,2':6',2''-terpyridin-4-yl-ethynyl)benzene)3][M = Ru(II), Fe(II), 2Ru(II)Fe(II)

Complexation of a predesigned (1,2-bis(2,2':6',2'-terpyridin-4-yl-ethynyl)benzene) ligand possessing a 60 degrees angle between two terpyridines with transition metals [Fe(II) and Ru(II)] afforded the self-assembled, triangular metallomacrocycles.     

Datura stramonium hairy roots tropane alkaloid content as a response to changes in Gamborg’s B5 medium

Hairy roots are less susceptible to manipulation by changes in medium composition than callus and cell suspension cultures. However, when the individual components of the Gamborg’s B₅ medium were modified one by one, several of them modified the yield of root cultures. Nitrogen (N) source changes, the absence of phosphorus (P), calcium (Ca), and cobalt (Co), and the increase in the sucrose content of the medium increased the level of alkaloids inDatura stramonium hairy root cultures. The use of ammoniun as N source provoked the alkaloid excretion into the medium. The addition of different auxins inhibited the alkaloid accumulation, but the addition of abscisic acid (ABA) did not change the alkaloid content of the cultures. The use of MeJa increased the content of hyoscyamine to 100%.     

Tetranuclear [Rh4(mu-PyS2)2(diolefin)4] complexes as building blocks for new inorganic architectures: synthesis of coordination polymers and heteropolynuclear complexes with electrophilic d8 and d10 metal fragments

The reaction of [Rh4(mu-PyS2)2(cod)4] (PyS2 = 2,6-pyridinedithiolate, cod = 1,5-cyclooctadiene) with CF3SO3Me gave the cationic complex [Rh(4)(mu-PyS(2)Me)(2)(cod)4][CF3SO3]2 (1) with two 6-(thiomethyl)pyridine-2-thiolate bridging ligands from the attack of Me+ at the terminal sulfur atoms of the starting material. Under identical conditions [Rh4(mu-PyS2)2(tfbb)4] (tfbb = tetrafluorobenzobarrelene) reacted with CF3SO3Me to give the mixed-ligand complex [Rh(4)(mu-PyS2)(mu-PyS2Me)(tfbb)4][CF3SO3] 2. The nucleophilicity of the bridging ligands in the complexes [Rh4(mu-PyS2)2(diolefin)4] was exploited to prepare heteropolynuclear species. Reactions with [Au(PPh3)(Me2CO)][ClO4] gave the hexanuclear complexes [(PPh3)2Au2Rh4(mu-PyS2)2(diolefin)4][ClO4]2 (diolefin = cod (3), tfbb (4)). The structure of 4, solved by X-ray diffraction methods, showed the coordination of the [Au(PPh3)]+ fragments to the peripheral sulfur atoms in [Rh4(mu-PyS2)2(diolefin)4] along with their interaction with the neighbor rhodium atoms. Neutral coordination polymers of formula [ClMRh4(mu-PyS2)2(diolefin)4]n (M = Cu (5, 6), Au (7)) result from the self-assembly of alternating [Rh4(mu-PyS2)2(diolefin)4] ([Rh4]) blocks and MCl linkers. The formation of the infinite polymetallic chains was found to be chiroselective for M = Cu; one particular chain contains exclusively homochiral [Rh4] complexes. Cationic heterometallic coordination polymers of formula [MRh4(mu-PyS2)2(diolefin)4]n[BF4]n (M = Ag (8, 9), Cu (10, 11)) and [Rh5(mu-PyS2)2(diolefin)5]n[BF4]n (12, 13) result from the reactions of [Rh4] with [Cu(CH2CN)4]BF4, AgBF4, and [Rh(diolefin)(Me2CO)2]BF4, respectively. The heterometallic coordination polymers exhibit a weak electric conductivity in the solid state in the range (1.2-2.8) x 10(-7) S cm(-1).     

Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.