Analysis of beers from Brazil with synchrotron radiation total reflection X-ray fluorescence

Summary In this study the concentrations of P, S, Cl, K, Ca, Mn, Fe, Zn and Br in twenty-nine brands of national and international beers were determined by synchrotron radiation total reflection X-ray fluorescence analysis (SR-TXRF). The results were compared with the limits established by the Brazilian legislation and the nutritional values established by National Agricultural Library (NAL, USA). The measurements were performed at the X-Ray Fluorescence Beamline at Brazilian National Synchrotron Light Laboratory, in Campinas, S?o Paulo, Brazil, using a polychromatic beam for excitation. A small volume of 5 ml of beers containing an internal standard used to correct geometry effects was analyzed without pretreatment. The measuring time was 100 seconds and the detection limits obtained varied from 1 mg ^. l^-1 for Mn and Fe to 15 mg ^. l^-1 for P.     

Lupane Pentacyclic Triterpenes Isolated from Stems and Branches of Maytenus imbricata (Celastraceae)

Four lupane pentacyclic triterpenes were isolated from the hexane extract of stems and branches of Maytenus imbricata Mart. ex Reissek : 3‐oxolup‐20(30)‐en‐29‐al ( 1 ), 30‐hydroxylup‐20(29)‐en‐3‐one ( 2 ), (11α)‐11‐hydroxylup‐20(29)‐en‐3‐one ( 3 ), and (3β)‐lup‐20(30)‐ene‐3,29‐diol ( 4 ). The structural identification of 1 – 4 was achieved by ¹H‐ and ¹³C‐NMR techniques, including 2D experiments (HSQC, HMBC, and NOESY).     

Solid state separated-local-field NMR spectroscopy on half-integer quadrupolar nuclei: principles and applications to borane analysis

New multidimensional NMR methods correlating the quadrupolar and heteronuclear dipolar interactions affecting a half-integer quadrupolar spin in the solid state are introduced and exemplified. The methods extend separated-local-field magic-angle spinning (SLF MAS) NMR techniques that have been used successfully in spin-(1)/(2) spectroscopy to the study of S >/= (3)/(2) nuclei. In our implementation, these techniques avoid homonuclear proton decoupling requirements by relying on moderately fast MAS rates (6-15 kHz) and use rotor-synchronized constant-time pulse sequences to achieve nearly arbitrary amplifications of the apparent dipolar coupling strengths. The result is a suite of simple 2D NMR experiments, whose line shapes carry valuable information about the structure and dynamics of solids containing quadrupolar and proton nuclei. The potential of these sequences was exploited to gather new insight into the structure and dynamics of a variety of boron-containing samples. These experimental SLF schemes were also extended to 3D NMR experiments that incorporate multiple-quantum MAS, thus enabling the resolution needed to study multiple chemical sites in a solid and providing a useful tool for the assignment of inequivalent sites.     

Methylation of Chitosan with Iodomethane: Effect of Reaction Conditions on Chemoselectivity and Degree of Substitution

N,N,N‐trimethylchitosan (TMC) was prepared by reacting purified chitosan with iodomethane, in the presence of sodium hydroxide, water and sodium iodide, at room temperature. The reaction medium was N‐methyl‐2‐pyrrolidone. Different samples of TMC were obtained by adding to the reaction medium a fixed volume (5.5 mL) of aqueous NaOH solutions at different concentrations (15, 20, 30 and 40 wt.‐%) and carrying out the reactions for 9 or 24 h. The features observed in the ¹H and ¹³C NMR spectra of these chitosan derivatives, in respect of the chemical shift, number and relative intensity of the signals, depended strongly on the excess of NaOH and H₃CI added to the reaction medium, but when the lowest excess was employed, the characteristics of the derivative were not affected by the reaction time to the same extent. The average degree of quaternization of these N‐methylated derivatives of chitosan ranged from 10.5% to 44.8%, according to the reaction conditions. Increasing the excess of NaOH, in reactions carried out for 9 h, resulted in TMC samples with progressively higher content of trimethylated sites however, the reaction yields were correspondingly lower and O‐alkylation was favored in these cases.

¹H NMR spectrum of sample [A_X]^24h dissolved in D₂O (C_p = 10 g/L).     

Extraction of Pb(II), Cd(II), and Hg(II) from aqueous solution by nitrogen and thiol functionality grafted to silica gel measured by calorimetry

The reaction of ethylene sulfide with 3-aminopropyltrimethoxysilane gave a new silylating agent, which was anchored onto a silica surface via the sol–gel procedure. This surface displayed a chelating moiety containing nitrogen and two sulfur basic centers potentially capable of extracting cations from aqueous solutions. The process of metal extraction was followed by a batch method, and fitted to a modified Langmuir equation. The maximum adsorption capacities found were: 2.06 ± 0.01, 3.72 ± 0.02, and 5.14 ± 0.02 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The enthalpies of bending are: −1.16 ± 0.04, −3.60 ± 0.10, and −8.94 ± 0.03 kJ mol⁻¹ for Cd(II), Pb(II), and Hg(II), respectively. The Gibbs free energies of binding agree with the spontaneity of the proposed reactions between cations and basic centers.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Molecular distillation

Molecular distillation was studied for the separation of tocopherols from soya sludge, both experimentally and by simulation, under different operating conditions, with good agreement. Evaporator temperatures varied from 100°C to 160°C and feed flow rates ranged from 0.1 to 0.8 kg/h. The process pressure was maintained at 10⁻⁶ bar, the feed temperature at 50°C, the condenser temperature at 60°C, and the stirring at 350 rpm. For each process condition, samples of both streams (distillate and residue) were collected and stored at −18°C before tocopherols analyses. Owing to the differences between molecular weights and vapor pressures of free fatty acids and tocopherols, tocopherols preferentially remained in the residue at evaporator temperatures of 100°C and 120°C, whereas for higher temperatures (140°C and 160°C) and lower feed flow rate, tocopherols tended to migrate to the distillate stream.     

Accurate redetermination of the X-ray structure and electronic bonding in adenosylcobalamin

The electronic structure of adenosylcobalamin (B12 coenzyme, AdoCbl) has been calculated by a density functional method, using the orthogonalized linear combination of the atomic orbital method (OLCAO). Since a fixed accurately determined geometry was needed in such calculations, the crystal structure of adenosylcobalamin has been redone and refined to R = 0.065, using synchrotron diffraction data. Comparison with the recently reported electronic structures of cyano- (CNCbl) and methylcobalamin (MeCbl) shows that the net charges and bond orders vary only on the axial donors. The values in the three cobalamins suggest that the Co-C bond in MeCbl has a strength similar to that in AdoCbl, but it is significantly weaker that that in CNCbl. Present results are compared with those previously reported for the analogous corrin derivatives; i.e., simplified cobalamins with the side chains a-f replaced by H atoms. Despite a qualitative agreement, a discrepancy in the calculated HOMO-LUMO gap is found.     

NMR characterization of new 10-membered-ring macrolactones and dihydrobenzophenazine-5-one, oxidized derivatives of benzo[a]phenazines

Peroxidation of the phenazine of beta-lapachone using m-ClC6H4CO3H-CH2Cl2 furnished a macrolactone with a rigid 10-membered ring, and the corresponding N-oxide, along with a dihydrobenzophenazine-5-one. All of the new compounds were fully characterized by spectroscopic methods, with the unambiguous assignment of the hydrogens and carbon NMR signals for the N-oxide, with the aid of 2-D NMR, mainly COSY, HMQC, HSQC and HMBC. For the other two compounds some signals could not be assigned owing to their own intrinsic features.     

Mössbauer study of Brazilian soapstone

Steatite mineral rocks, soapstone, have been studied by X-ray diffraction, optical microscopic analysis (modal analysis), electron probe micro analysis and Mössbauer spectroscopy for characterization, mineral percentages and chemical composition. Mössbauer spectra show both, magnetic interactions corresponding to magnetite and doublets corresponding to talc. chlorite, dolomite and tremolite. The temperature dependence of the quadrupole splitting in dolomite has been explained in terms of crystal field interaction.