Melt Extrusion Encapsulation of Flavors: A Review

Encapsulation of flavor and aroma compounds has been largely explored in order to meet appraisal demands from consumers by improving the impact of flavor during the consumption of food products. Even though several techniques have been used for encapsulating volatile compounds, i.e., spray drying, fluidized bed coating, coacervation, and melt extrusion, those most frequently used in the food industry are spray drying and melt extrusion. In this article, the different techniques of encapsulation of flavors and fragrances in polymer-based matrices by extrusion are reviewed and partly re-defined, emphasizing the differences between the various techniques reported so far and the role of matrix types, additives, and operative conditions. Also, the role of water as a key parameter for controlled release and shelf stability of the delivery system will be discussed.     

APplication of Continuous Thermodynamics to the Stability of Polymer Systems. II

A determinant criterion for the critical state in solutions and mixtures of polydisperse polymers is established within the general framework of Gibbs theory. The treatment continues an earlier paper by considering more general Gibbs free energy relations: The function replacing the x-term in the classic Flory-Huggins equation is permitted to depend on a finite number of moments of the polymer distribution(s) so as to embrace most Gibbs free energy relations of practical use. The new criterion leads to a very large reduction of computer time and of needed storage capacity compared to the traditional Gibbs determinant criterion. Some relations known from the literature are shown to be special cases of the established new criterion.     

Comparison of direct mass spectrometry methods for the on‐line analysis of volatile compounds in foods

For the on‐line monitoring of flavour compound release, atmospheric pressure chemical ionization (APCI) and proton transfer reaction (PTR) combined to mass spectrometry (MS) are the most often used ionization technologies. APCI‐MS was questioned for the quantification of volatiles in complex mixtures, but direct comparisons of APCI and PTR techniques applied on the same samples remain scarce. The aim of this work was to compare the potentialities of both techniques for the study of in vitro and in vivo flavour release. Aroma release from flavoured aqueous solutions (in vitro measurements in Teflon bags and glass vials) or flavoured candies (in vivo measurements on six panellists) was studied using APCI‐ and PTR‐MS. Very similar results were obtained with both techniques. Their sensitivities, expressed as limit of detection of 2,5‐dimethylpyrazine, were found equivalent at 12 ng/l air. Analyses of Teflon bag headspace revealed a poor repeatability and important ionization competitions with both APCI‐ and PTR‐MS, particularly between an ester and a secondary alcohol. These phenomena were attributed to dependency on moisture content, gas/liquid volume ratio, proton affinities and product ion distribution, together with inherent drawbacks of Teflon bags (adsorption, condensation of water and polar molecules). Concerning the analyses of vial headspace and in vivo analyses, similar results were obtained with both techniques, revealing no competition phenomena. This study highlighted the equivalent performances of APCI‐MS and PTR‐MS for in vitro and in vivo flavour release investigations and provided useful data on the problematic use of sample bags for headspace analyses. Copyright © 2013 John Wiley & Sons, Ltd.     

Conduction calorimetric studies of ternary binders based on Portland cement, calcium aluminate cement and calcium sulphate

Different binders of Portland cement, calcium aluminate cement and calcium sulphate (PC/CAC/C $ {\bar{\text{S}}} $ ) have been investigated to determinate the influence the CAC and C $ {\bar{\text{S}}} $ amount in the reactions mechanism. Several mixtures were studied, ratios of 100, 85/15 and 75/25 of PC/CAC with 0, 3 and 5 % of C $ {\bar{\text{S}}} $ . Conduction calorimetric technique was used to follow the hydration during 100 h. The XRD and FTIR techniques were used as support in the analysis of the hydration products. The results have shown that the studied ternary systems form an extra amount of ettringite, and changes in the reactions mechanism with respect to a PC. The reactions mechanism depends on the CAC and C $ {\bar{\text{S}}} $ amount present in the different binders.     

Synthesis,Photophysics and Nonlinear Optical Properties of Stilbenoid Pyrimidine‐Based Dyes Bearing Methylenepyran Donor Groups

The nonlinear properties and the photophysical behavior of two π‐conjugated chromophores that incorporate an electron‐deficient pyrimidine core (A) and γ‐methylenepyrans as terminal donor (D) groups have been thoroughly investigated. Both dipolar and quadrupolar branching strategies are explored and rationalized on the basis of the Frenkel exciton model. Even though a cooperative effect is clearly observed if the dimensionality is increased, the nonlinear optical (NLO) response of this series is moderate if one considers the nature of the D/A couple and the size of the chromophores (as measured by the number of π electrons). This effect was attributed to a disruption in the electronic conjugation within the dyes’ scaffold for which the geometry deviates from planarity owing to a noticeable twisting of the pyranylidene end‐groups. This latter structural parameter also has a strong influence on the excited‐state dynamics, which leads to a very efficient fluorescence quenching.     

Comparison of various silica‐based monoliths for the analysis of large biomolecules†

In the present study, three types of silica‐based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide‐pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first‐generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3–5.8 kDa). In contrast, the wide‐pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide‐pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica‐based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).     

Lipophilic phthalocyanines for their potential interest in photodynamic therapy: synthesis and photo-physical properties

Several phthalocyanines with different peripheral substituents were prepared and characterized by MALDI-TOF, ¹H NMR, UV–vis, fluorescence, and singlet oxygen quantum yields and retention time in HPLC normal phase. Zinc was used as a central metal ion to increase the photodynamic therapy efficiency. Phthalonitrile or 4-nitro phthalonitriles were used as starting materials. The influence of lipophilicity on the photophysical and photochemical properties was evaluated.     

CZE study on adsorption processes of aliphatic and aromatic amines on PMMA chip

Adsorption processes on a PMMA chip linked with CZE separations of a group of 13 aliphatic and aromatic mono‐ and di‐amines were studied. Due to the lack of chromophores within aliphatic amines, contact conductivity detection implemented directly onto the chip was used for monitoring of cationic CZE separations. To prevent an adsorption of studied amines to the chip channels, the surface of PMMA chip was modified by dynamic coating. Different surface modifiers, such as aliphatic oligoamines (diethylenetriamine and triethylenetetramine), were added to the BGE solutions filling the chip channels. The effect of various concentrations of surface modifiers on peak profiles and separation parameters of amines was monitored. Of these, mainly, aliphatic di‐amines and aromatic mono‐amines adversely affected the CZE resolution of a whole group of analytes by their strong adsorption to the chip channels. A propionate BGE with pH 3.2 containing 100 μM triethylenetetramine and 25 mM 18‐crown‐6‐ether was found suitable for CZE resolution of 12 from a total of 13 amines studied. Simple dynamic modification of the surface of PMMA chip enabled fast (analysis time lasted 9 min), sensitive (sub‐μM LODs reached) and reproducible (1–3% RSD of the peak areas) CZE analysis of the aliphatic and aromatic amines.     

Magnetic Hyperthermia Enhancement in Iron-based Materials Driven by Carbon Support Interactions

Magnetic hyperthermia (MH) shows great potential in clinical applications because of its very localized action and minimal side effects. Because of their high saturation magnetization values, reduced forms of iron are promising candidates for MH. However, they must be protected in order to overcome their toxicity and instability (i. e., oxidation) under biological conditions. In this work, a novel methodology for the protection of iron nanoparticles through confinement within graphitic carbon layers after thermal treatment of preformed nanoparticles supported on carbon is reported. We demonstrate that the size and composition of the nascent confined iron nanoparticles, as well as the thickness of their protective carbon layer can be controlled by selecting the nature of the carbon support. Our findings reveal that a higher nanoparticle–carbon interaction, mediated by the presence of oxygen-containing groups, induces the formation of small and well-protected α-Fe-based nanoparticles that exhibit promising results towards MH based on their enhanced specific absorption rate values.