A 2D Wavy Parquet Architecture Based on the Biphenyl-3,3’,4,4’-tetracarboxylic Acid and Bis(2-benzimidazole)alkanes Ligands

A double-T-shaped ligand (H4BPTC) and bis(2-benzimidazole)alkanes as the spacers have been firstly used to direct the assembly of a 2D coordination polymer with wavy parquet network topology, [Zn(BPTC)0.5(H2C2EIm)(H2O)]n (1, C24H18ZnN4O5, Mr = 507.79, H4BPTC = biphenyl-3,3',4,4'-tetracarboxylic acid, H2C2EIm = 2,2'-(1,2-ethanediyl)-bis(1H-benzi- midazole), which was determined by single-crystal X-ray diffraction analysis. The crystal belongs to the monoclinic system, space group P21/n with a = 1.1844(5), b = 1.4019(5), c = 1.4026(5) nm, β = 108.359(5)°, V = 2.2104(15) nm3, Z = 4, Dc = 1.526 g/cm3, μ(MoKα) = 1.156 mm-1, F(000) = 1040, S = 1.038, the final R = 0.0427 and wR = 0.0793 for 3834 reflections with I > 2σ(I). The compound units are linked through BPTC ligands into a wavilness parquet 2D layer and further connected into a 3D framework via π-π packing interactions between the adjacent H2C2EIm ligands and weak N-H…O hydrogen bonding between uncoordinated carboxylate and the nitrogen atoms of H2C2EIm as well as the free water molecules.     

“One pot” homogeneous synthesis of thermoplastic cellulose acetate-graft-poly(l-lactide) copolymers from unmodified cellulose

Using native cellulose as the starting material, cellulose acetate-graft-ploy (l-lactide) (CA-g-PLA) copolymers were successfully synthesized by “one-pot” process in an ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl). In this process, cellulose was first reacted with acetic anhydride, yielding cellulose acetate (CA), and then ring opening graft copolymerization of l-lactide was carried out from the residual hydroxyl groups of CA in the same solution using 4-dimethylaminopridine (DMAP) as the catalyst. Both acetyl and ploy (l-lactide) contents in CA-g-PLA copolymers could be well controlled by changing reaction conditions. The structures and thermal properties of CA-g-PLA copolymers were characterized. The glass transition temperature T_g of copolymers decreased with increasing PLA content. Compared to the pure PLA and cellulose-graft-PLA copolymers, the CA-g-PLA copolymers possessed better thermo mechanical properties in a temperature range of 60–130 °C. When the molar substitution of PLA (MS_PLA) was above 1.71, the CA-g-PLA copolymers exhibited thermoplastic behavior and could be processed by conventional thermal processing methods, such as injection molding and melt spinning.     

Effect of Axial Ligands on the Molecular Configurations,Stability, Reactivity,and Photodynamic Activities of Silicon Phthalocyanines

To demonstrate the effect of axial ligands on the structure–activity relationship, a series of axially substituted silicon phthalocyanines (SiPcs) have been synthesized with changes to the axial ligands. The reactivity of the axial ligand upon shielding by the phthalocyanine ring current, along with their stability, photophysical, and photodynamic therapy (PDT) activities were compared and evaluated for the first time. As revealed by single‐crystal XRD analysis, rotation of the axial ? OMe ligands was observed in SiPc 3 , which resulted in two molecular configurations coexisting synchronously in both the solid and solution states and causing a split of the phthalocyanine α protons in the ¹H NMR spectra that is significantly different from all SiPcs reported so far. The remarkable photostability, good singlet oxygen quantum yield, and efficient in vitro photodynamic activity synergistically show that compound 3 is one of the most promising photosensitizers for PDT.     

铀酰与羧酸和肟基类配体相互作用的理论研究

深入了解各种功能基团与铀酰离子的络合行为有助于设计和开发高效海水提铀吸附剂. 本工作通过密度泛函理论(DFT)方法系统地研究了两种典型铀酰络合配体吡啶-2,6-二羧酸(H₂DPA)和戊二酰偕亚胺二肟(H₂A)与铀酰离子及碳酸根离子形成的配合物的结构、成键性质以及热力学稳定性. 研究结果表明, 所有配合物中, 配体与铀酰离子之间具有不同强度的共价相互作用. 由于H₂A配位时发生了质子重排, 而且配体的解离能较高, 使其更难与[UO₂(CO₃)₃]^4-发生取代反应, 因此H₂DPA配体是海水提铀中一种潜在的有效配体. 本工作的相关研究结果为海水提铀中高效吸附基团的设计和开发提供了理论线索.     

Novel superabsorbent polymer composites based on α-cellulose and modified zeolite: synthesis,characterization, water absorbency and water retention capacity

Cellulose - Most superabsorbent polymers (SAPs) are prepared based on synthetic polymers (from petroleum resources), making them costly, nondegradable, and not ecofriendly. To overcome these...     

Preliminary investigation into feasibility of dissolved methane measurement using cavity ringdown spectroscopy technique

For the exploration of gas hydrate resources by measuring the dissolved methane concentration in seawater, a continuous-wave cavity ringdown spectroscopy (CW-CRDS) experimental setup was constructed for trace methane detection. A current-modulation method, rather than a cavity-modulation method using an optical switch and a piezoelectric transducer, was employed to realize the cavity excitation and shutoff. Such a current-modulation method enabled the improvement of the experimental setup construction and stability, and the system size and stability are critical for a sensor to be deployed underwater. Ringdown data acquisition and processing were performed, followed by an evaluation of the experimental setup stability and sensitivity. The obtained results demonstrate that great errors are introduced when a large fitting window is selected if the analog-to-digital converter has an insufficient resolution. The ringdown spectrum of methane corresponding to the 2v ₃ band R(4) branch was captured, and the methane concentration in lab air was determined to be 2.06 ppm. Further experiments for evaluating the quantitative ability of this CW-CRDS experimental setup are underway from which a high-sensitivity methane sensor that can be combined with a degassing system is expected.     

Preparation and characterization of electrospun nanofiber-coated membrane separators for lithium-ion batteries

Nanofiber-coated membrane separators were prepared by electrospinning polyvinylidene fluoride-co-chlorotrifluoroethylene (PVDF-co-CTFE) nanofibers onto three different microporous membrane substrates. The nanofibers on the membrane substrates showed uniform morphology with average fiber diameters ranging from 129 to 134 nm. Electrolyte uptakes, ionic conductivities, and interfacial resistances were studied by soaking the nanofiber-coated membrane separators with a liquid electrolyte solution of 1 M lithium hexafluorophosphate in ethylene carbonate/dimethylcarbonate/ethylmethyl carbonate (1:1:1 by volume). Compared with uncoated membranes, nanofiber-coated membranes had greater electrolyte uptakes and lower interfacial resistances to the lithium electrode. It was also found that after soaking in the liquid electrolyte solution, nanofiber-coated membranes exhibited higher ionic conductivities than uncoated membranes. In addition, lithium-ion half cells containing nanofiber-coated membranes were evaluated with a LiFePO₄ cathode for charge–discharge capacities and cycle performance. The cells containing a nanofiber-coated separator membrane showed high discharge specific capacities and good cycling stability at room temperature. Results demonstrated that coating PVDF-co-CTFE nanofibers onto microporous membrane substrates is a promising approach to obtain new and high-performance separators for rechargeable lithium-ion batteries.     

Water-Insensitive Synthesis of Poly-β-Peptides with Defined Architecture

Biocompatible and proteolysis-resistant poly-β-peptides have broad applications and are dominantly synthesized via the harsh and water-sensitive ring-opening polymerization of β-lactams in a glovebox or using a Schlenk line, catalyzed by the strong base LiN(SiMe₃)₂. We have developed a controllable and water-insensitive ring-opening polymerization of β-amino acid N-thiocarboxyanhydrides (β-NTAs) that can be operated in open vessels to prepare poly-β-peptides in high yields, with diverse functional groups, variable chain length, narrow dispersity and defined architecture. These merits imply wide applications of β-NTA polymerization and resulting poly-β-peptides, which is validated by the finding of a HDP-mimicking poly-β-peptide with potent antimicrobial activities. The living β-NTA polymerization enables the controllable synthesis of random, block copolymers and easy tuning of both terminal groups of polypeptides, which facilitated the unravelling of the antibacterial mechanism using the fluorophore-labelled poly-β-peptide.     

Degradation of Structurally Defined Graphene Nanoribbons by Myeloperoxidase and the Photo-Fenton Reaction

As an emerging member of the graphene family, structurally defined graphene nanoribbons (GNRs) have shown promising applications in various fields. The evaluation of the degradability of GNRs is particularly important for assessing the persistence level and risk of these materials in living organisms and the environment. However, there is a void in the study of the degradation of GNRs. Here, we report the degradation behavior of GNRs in the presence of human myeloperoxidase (hMPO) or treated with the photo-Fenton (PF) reaction. With the assistance of potassium hydroxide or imidazole, which facilitates the dispersion of GNRs in the aqueous solution, GNRs underwent only partial degradation after 25-hour incubation with hMPO, while, the PF reaction degraded GNRs almost completely after 120 hours. These results indicate that structurally precise GNRs can be efficiently degraded under suitable conditions, providing more opportunities for future applications in different fields.     

Rationally Designed Three-Layered Cu2S@Carbon@MoS2 Hierarchical Nanoboxes for Efficient Sodium Storage

Hybrid materials, integrating the merits of individual components, are ideal structures for efficient sodium storage. However, the construction of hybrid structures with decent physical/electrochemical properties is still challenging. Now, the elaborate design and synthesis of hierarchical nanoboxes composed of three-layered Cu₂S@carbon@MoS₂ as anode materials for sodium-ion batteries is reported. Through a facile multistep template-engaged strategy, ultrathin MoS₂ nanosheets are grown on nitrogen-doped carbon-coated Cu₂S nanoboxes to realize the Cu₂S@carbon@MoS₂ configuration. The design shortens the diffusion path of electrons/Na⁺ ions, accommodates the volume change of electrodes during cycling, enhances the electric conductivity of the hybrids, and offers abundant active sites for sodium uptake. By virtue of these advantages, these three-layered Cu₂S@carbon@MoS₂ hierarchical nanoboxes show excellent electrochemical properties in terms of decent rate capability and stable cycle life.