Temperature and pH Dually-responsive Poly(β-amino ester) Nanoparticles for Drug Delivery

Stimuli-responsive polymers have undoubtedly been of great interest in the past decades due to a variety of their potential applications in biomedical territory. However, their non-degradability limits their in vivo applications. Herein, we report a novel pH and temperature dual-stimuli responsive-poly(β-amino ester). The pH/temperature sensitivities are interrelated and can be easily tuned by changing PEG-diacrylate chain length and the percentage of biamines in the feed ratio. These dual-responsive polymers are very useful in drug delivery. Reaction of methyl ether poly(ethylene glycol)(MPEG) and poly(β-amino ester) resulted in an amphiphilic MPEG-PBAE block copolymer which could form nanoparticles by selfassembly. A hydrophobic drug(DOX) was loaded in the self-assembled nanoparticles at low temperature without using organic solvents. The loaded drug was released very slowly and steadily at 37 ℃ under physiological conditions(p H 7.4), but rapidly released from the micelles in weakly acidic environments(pH 6.4 and 5.0) for intracellular drug release. Thus, these poly(β-amino ester) polymers constitute ideal drug carriers since their thermal sensitivity allows the drug loadings without using organic solvent and their pH sensitivity permits fast intracellular drug release.     

金属有机框架CPL-1填充柱气相色谱分析氢同位素

金属有机框架(MOFs)材料CPL-1的比表面积大、孔径均一,在低温条件下对氢同位素具有良好的量子筛分效应,是气相色谱固定相潜在的应用材料。采用CPL-1填充制备了长0.5 m、内径1 mm的微孔填充柱,借助单晶Al_2O_3颗粒间隙构建了色谱载气流通路径,在低温条件下探索研究了CPL-1填充柱的氢同位素分析性能。结果表明,在77 K时CPL-1对H_2和D_2的吸附量接近4 mmol/g,优于MnCl2/γ-Al_2O_3和γ-Al_2O_3,CPL-1填充柱在取样量0.25~2 mL范围内对低浓度氢同位素样品的检测具有良好的线性关系,检测的相对误差小于4%。CPL-1填充柱具有线性范围宽、重复性好、准确度高等优点,在氢同位素色谱分析中具有潜在的应用价值。     

富缺陷BN负载的高分散Cu催化乙醇脱氢制乙醛

生物乙醇作为平台分子通过催化转化的方法可以制备烯烃、乙醛、丁醇和芳香化学品等,其中乙醛是生产乙酸、季戊四醇、三氯乙醛、山梨酸等重要化学品的原料.随着乙醛的需求量逐年增加,发展以乙醇直接脱氢生成乙醛的工艺,具有联产氢气、原子经济性高、产物易分离的优点,符合国际绿色低碳发展战略要求,有望替代当前乙烯氧化法生产工艺.乙醇分子...     

一种高灵敏、多响应的Zn-MOF荧光传感器对Fe3+、2，4，6-三硝基苯酚和奥硝唑的检测

在水热条件下基于H₄bta(1,2,3,5-苯四酸)和bpy(4,4''-联吡啶)配体设计、合成了一个锌的金属有机骨架(Zn-MOF){[Zn₂(bta)(bpy)(H₂O)₂]·H₂O}_n(1),并用元素分析、红外光谱、X射线单晶衍射等对其进行了结构表征。MOF 1为三维网状结构。完全去质子化的(bta)^4-配体采用了μ₆-η¹-η²-η²-η¹螯合桥联配位方式。有意思的是,MOF 1是一种高灵敏度、选择性好、多响应的荧光传感器,可用于Fe³⁺、2,4,6-三硝基苯酚和奥硝唑的快速检测。此外还研究了1的热稳定性。     

瞬态空化泡演变过程的数值模拟

采用边界积分方程方法，对无粘流体中三个空化泡以及自由面附近二个空化泡相互作用的演变过程进行了数值模拟。计算中边界用二阶有限元离散，影响系数矩阵非对角线元素用六点高斯数值积分方法计算，对第一类、第二类完全椭圆积分用高次多项式近似，对计算系数矩阵对角线元素中遇到的奇异积分进行了特殊处理。结果表明，在不同的给定参数下，空化泡的溃灭形态各异，柱状射流和环形射流都有可能发生，使空化泡演变成双泡或环形泡。     

高温固体润滑研究的现状及发展趋势

从高温固体润滑剂及高温自润滑材料等方面对高温固体润滑的研究现状进行了综述,并在此基础上提出了高温摩擦学领域的几个值得注意的问题。     

复杂载荷三维裂纹分析双重边界元法

提出可用于高温、高转速状态下的热动力机械三维含裂构件热弹性分析方法——双重边界元法.首先建立了考虑温度及离心载荷的双重边界积分方程组,并对边界积分方程组的选取及适用范围进行了讨论。然后提出角非快调元模型离散技术。接着提出超奇异积分方程分析去除奇异性方法及数值积分技术.数值算例表明计算结果与有关权函数解十分吻合,说明了用双重边界元法计算复杂载荷条件下三维应力强度因子的有效性.还讨论了有关热应力强度因子权函数解的适用范围.     

新型Poisson括号意义下的无穷维Lie代数

本文首先针对ＫｄＶ方程的Ｈａｍｉｌｔｏｎ形式，建立一种比较容易验证的新型Ｐｏｉｓｓｏｎ括号和无穷维Ｌｉｅ代数．其次，研究ＫｄＶ方程的Ｈａｍｉｌｔｏｎ形式的第一积分与新型Ｐｏｉｓｏｎ括号的关系，得到判定第一积分的充分必要条件．最后，构造ＫｄＶ方程的第一积分．     

Deformation measurements by digital image correlation: Implementation of a second-order displacement gradient

This paper outlines the procedure for refining the digital image correlation (DIC) method by implementing a second-order approximation of the displacement gradients. The second-order approximation allows the DIC method to directly measure both the first- and second-order displacement gradients resulting from nonlinear deformation. Thirteen unknown parameters, consisting of the components of displacement, the first- and second-order displacement gradients and the gray-scale value offset, are determined through optimization of a correlation coefficient. The previous DIC method assumes that the local deformation in a subset of pixels is represented by a first-order Taylor series approximation for the displacement gradient terms, so actual deformations consisting of higher order displacement gradients tend to distort the infinitesimal strain measurements. By refining the method to measure both the first- and second-order displacement gradients, more accurate strain measurements can be achieved in large-deformation situations where second-order deformations are also present. In most cases, the new refinements allow the DIC method to maintain an accuracy of ±0.0002 for the first-order displacement gradients and to reach ±0.0002 per pixel for the second-order displacement gradients.     

NONLINEAR UNIFIED STRENGTH MODEL OF GEOMATERIALS

将材料的破坏归结为剪切破坏,每种材料对应于特定的剪切滑动面,抗剪强度为滑动面上正应力的函数,基于不同材料的强度特性将一系列的剪切滑动面统一起来,建立了岩土材料的非线性统一强度模型.非线性统一强度模型的滑动面为β应力空间内的等倾面,在β应力空间内的强度面为圆锥面;在普通应力空间内的强度面为一系列连续光滑、外凸的锥面,在偏平面上强度曲线涵盖了从下限Matsuoka-Nakai曲线到上限Drucker-Prager圆之间的所有区域,子午面上强度线为直线.非线性统一强度模型只有3个材料参数,参数都具有明确的物理意义,通过与国内外学者已取得的岩土类材料真三轴强度试验结果的比较,表明模型可适用于多种类型的材料,并合理描述其非线性强度特性.