钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系测定钒

本文利用钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系建立了痕量钒的化学发光测定法。方法检出限是2×10~(-10)g/mL钒,线性范围是4×10~(-10)～1×10~(-7)g/mL钒,测定的相对标准偏差小于2%,考察了26种常见离子的干扰情况。方法已用于水样中痕量钒的测定。     

繁峙煤镜质组的生烃特征与热解产物生成动力学研究

本文利用付立叶红外光谱（ＦＴＩＲ），热解气相色谱（Ｐｙ－ＧＣ）及热解气相色谱质谱（Ｐｙ－ＧＣ－ＭＳ）联用技术等分析手段，探讨了我国山西繁峙煤镜质组的生烃特征，鉴定了如气体烃、正构脂肪烃、苯酚、单环芳烃以及甲氧基酚类等热解产物６７种化合物。用相继等温热解法一级反应动力学模型，求取了热解产物如气体组分（Ｃ１￣Ｃ６）、轻烃（Ｃ７￣Ｃ１４）、重烃（Ｃ１５￣Ｃ３０）、正构脂肪烃（ｎＣｉ）、烷基芳烃、苯酚等的     

超声雾化进样微波诱导等离子体原子吸收光谱法测定银的某些影响因素研究

本文将超声雾化技术与MIP-AAS联用,以“L”型吸收管代替“T”型吸收管作为AAS测量的吸收池,采用水冷凝和浓H_2SO_4吸收相结合去溶,研究TUSN-MIP-AAS方法测银时的某些影响因素,讨论了微波前向功率,载气流速、去溶系统、溶液酸度、共存离子及易也离元素等对吸收信号的影响,本法所得的测银的特征浓度为0.01μg/ml(328.1nm)和0.03μg/ml(338.3nm),相对标准偏差为7.5％.     

Three-dimensional structural features and the toxicity of aminobenzenes and phenols

There are many organic pollutants in the environment, such as polychlorinated biphenyl, polycyclic aromatic hydrocarbons, dichlorodiphenyl-trichloroethane (DDT), and polychlorinated naphthalene. These organic pollutants are persistent,liposoluble and easily cumulated in organism; consequently, the potential toxicity will be high. Risk assessment of industrial chemicals is currently carried out using scanty experimental data, because many of these chemicals have very little or no test data. S…     

低硫可膨胀石墨的制备

低硫可膨胀石墨的制备宋克敏，路文义，高淑英，阎秋燕（河北教育学院石家庄０５００９１）关键词低硫可膨胀石墨，制备，过氧化氢，硫酸柔性石墨具有耐高温、耐酸碱、抗拉、抗压、抗辐射、回弹性等优良性能，被广泛应用于化工、机械、肮天、原子能等领域。但其原材料可膨...     

Thermal Behaviour and Decomposition Kinetics for Two Palladium(II) Complexes with 1-aminopyrene and its Derivative

The thermal decomposition studies for two palladium(II) complexes Pd(apyr)₂Cl₂ and Pd(pmpa)Cl₂ (apyr=1–aminopyrene and pmpa=N–(2–pyridylmethylene)–1–pyrenylamine) were carried out in pure nitrogen using TG-DTG techniques. The non-isothermal kinetic parameters for the two complexes were evaluated employing the method suggested by Málek, esták, Koga et al. Based on the above results, thermal behaviour of the complexes were carefully discussed, which showed that not only the parameters value, but also the decomposition pattern and mechanism for complex 1 are different from complex 2.This revised version was published online in November 2005 with corrections to the Cover Date.     

二氧化碳溶剂浮选光度法测定高碘蛋总碘量

浮选法是二氧化碳气氛中,以溴化十六烷基三甲基铵(CTMAB)为捕收剂,用溶剂浮选吸光光度法对离子缔合物(CTMA~ I_3~-)的组成进行测定。试验表明,方法有较高的灵敏度,较好的准确性和重现性。     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.