对-叔丁基杯[8]芳烃键合硅胶制备及其毛细管电色谱性能研究

以γ-(环氧丙氧)丙基键合硅胶为前体,于硅胶表面键合环氧基,在催化剂存在下以杯芳烃钠盐开环制备杯芳烃键合硅胶固定相.该方法反应条件温和,适用性强.将这个新方法首次用于制备对-叔丁基杯[8]芳烃电色谱键合固定相(C8BS),采用加压电色谱初步评价其电色谱性能.研究结果表明,C8BS电渗流(Electrosmoticflow,EOF)较小,但通过控制键合反应及使用压力辅助电色谱可部分弥补上述不足.该固定相的EOF受流动相pH影响小(pH=3-8),同时大环配体屏蔽效应能有效地克服硅羟基引起的碱性化合物拖尾现象,这对电色谱分离具有重要意义.通过分步封尾研究EOF的来源发现,杯芳烃酚羟基对EOF有弱的贡献,这与报道的杯芳烃涂层具有径向电渗流调控能力相一致.     

蒙药新-Ⅱ中微量硒的测定

采用硒 -硫氰酸钾 -罗丹明 B-明胶 - OP体系分光光度法测定蒙药新 - 中微量硒。其含量为 6 .6—7.3μg· g-1 ,回收率为 94 %— 95 %。     

天然磷脂的色谱法分离、纯化研究进展

天然磷脂是一类含磷酸根的类脂化合物的总称,在医药学、营养学、化妆品和生命科学领域等有重要的应用价值。本文综述了不同原料样品中磷脂种类和其各分子的色谱法分离、纯化。着重讨论高效液相色谱法分离技术及其影响因素。最后概述了有助于提高分离选择性、检测灵敏度的化学衍生化方法。     

Improved Molecular Weight Control in Ring‐Opening Metathesis Polymerization (ROMP) Reactions with Ru‐Based Olefin Metathesis Catalysts Using N Donors and Acid: A Kinetic and Mechanistic Investigation

The effect of the addition of H₃PO₄ on the ROMP activity of cyclooctene (COE) with first‐ [Cl₂(PCy₃)₂Ru?CHPh] and second‐generation [(H₂IMes)Cl₂(PCy₃)Ru?CHPh] Grubbs’ catalysts 1 and 4 (Cy=cyclohexyl, Ph=phenyl, Mes=2,4,6‐trimethylphenyl (mesityl)), their inhibited mixtures with 1‐methylimidazole (MIM), as well as their isolated bis‐N,N′‐dimethylaminopyridine (DMAP) derivatives [Cl₂(PCy₃)(DMAP)₂Ru?CHPh)] ( 5 b ) and [Cl₂(H₂IMes)(DMAP)₂Ru?CHPh] ( 7 b ) (DMAP=dimethylaminopyridine), a novel catalyst, has been investigated. The studies include the determination of their initiation rates, as well as a determination of the molecular weights and molecular weight distributions of the polymers obtained with these catalysts and catalyst mixtures from the exo‐7‐oxanorbornene derivative 11 . The structure of catalyst 7 b was confirmed by means of X‐ray diffraction. All N‐donor‐bearing catalysts or N‐donor‐containing catalyst mixtures not only exhibited elevated activity in the presence of acid, but also increased initiation rates. Using the reversible inhibition/activation protocol with MIM and H₃PO₄ enabled us to conduct controlled ROMP with catalyst 4 producing the isolated exo‐7‐oxanorbornene‐based polymer 12 with predetermined molecular weights and narrow molecular weight distributions. This effect was based on fast and efficient catalyst initiation in contrast to the parent catalyst 4 . Hexacoordinate complex 5 b also experienced a dramatic increase in initiation rates upon acid‐addition and the ROMP reactions became well‐controlled in contrast to the acid‐free reaction. In contrast, complex 7 b performs well‐controlled ROMP in the absence of acid, whereas the polymerization of the same monomer becomes less controlled in the presence of H₃PO₄. The closer evaluation of catalysts 5 b and 7 b demonstrated that their initiation rates exhibit a linear dependency on the substrate concentration in contrast to catalysts 1 and 4 . As a consequence, their initiation rates are determined by an associative step, not a dissociative step as seen for catalysts 1 and 4 . A feasible associative metathesis initiation mechanism is proposed.     

Electrochemical polarisation and galvanic couple behaviour of the primary phase of 55% Al–Zn coating investigated using band microelectrodes (BME) and band microelectrode arrays

Electrochemical polarisation experiments have shown that anodic dissolution processes on Al–40% Zn alloys are significantly enhanced in chloride compared to sulfate-based electrolytes. The aluminium content of the alloys allowed passive behaviour to be observed in sulfate electrolyte even in the presence of zinc-rich precipitates on the surface. Electrolyte pH affected cathodic processes, which was attributed to the rate of proton reduction and the passivity of the surface. Monitoring the OCP of the alloy band during polarisation of neighbouring zinc electrodes in band microelectrode (BME) arrays showed that generation of alkaline pH at the zinc electrodes affected the OCP of the alloy when the inter-electrode spacing was 10, 50, and 200 μm. Where elements of a BME array were close enough to interact via mass transport, the overall galvanic behaviour of the cell was found to be anodic or cathodic, whereas the alloy was consistently cathodic with respect to zinc in galvanic cells at larger separations. Dedicated to the 80th birthday of Keith B. Oldham.     

Designed boronate ligands for glucose-selective holographic sensors

In this study, 2-acrylamidophenylboronate (2-APB) was synthesised and its ability to bind with glucose was investigated both in solution and when integrated into a holographic sensor. Multiple forms of 2-APB, resulting from the neighbouring effect of the amido group with the boronic acid through an intramolecular B--O-coordinated interaction, were shown to exist in solution by using multinuclear NMR spectrometry. It was found that 2-APB predominantly adopts a zwitterionic tetrahedral form at physiological pH values. The complex formation of 2-APB with glucose and lactate was investigated in DMSO; 2-APB favours binding with glucose rather than lactate and generates a five-membered-ring complex. Furthermore, a 2-APB-based holographic sensor displayed a significant response to glucose with little interference from lactate, and with no dependence on pH in the physiological pH range. These features suggest that the new ligand 2-APB is a potential candidate for the development of glucose-selective sensors.     

基于集合卡尔曼变换的东中国海声学 敏感区判定方法*

为改善海洋与水声环境预报质量,针对常规观测成本高、资料利用率低等问题,将适应性观测方法应用于海洋声学领域。结合海洋-声学耦合模式与集合卡尔曼转换敏感区诊断方法,以东中国海宫古海峡北部区域为验证区,计算并分析不同条件下海洋环境敏感区与声学敏感区分布,通过观测系统模拟试验验证适应性观测对验证区预报的提升效果。结果表明,两种敏感区位置随时间间隔增加均向验证区上游移动,海洋环境敏感区相比于声学敏感区分布更为集中,且平移特征更明显;对海洋环境敏感区和声学敏感区添加适应性观测均能提升海洋与水声环境的预报质量,提升效果随时间间隔增加而减小,在某种类型敏感区的适应性观测对相对应参数的预报质量提升效果优于对其他类型敏感区进行观测的效果。     

Poly(2,5-dimercapto-1,3,4-thiadiazole) as a cathode for rechargeable lithium batteries with dramatically improved performance

Organosulfur compounds with multiple thiol groups are promising for high gravimetric energy density electrochemical energy storage. We have synthesized a poly(2,5-dimercapto-1,3,4-thiadiazole) (PDMcT)/poly(3,4-ethylenedioxythiophene) (PEDOT) composite cathode for lithium-ion batteries with a new method and investigated its electrochemical behavior by charge/discharge cycles and cyclic voltammetry (CV) in an ether-based electrolyte. Based on a comparison of the electrochemical performance with a carbonate-based electrolyte, we found a much higher discharge capacity, but also a very attractive cycling performance of PDMcT by using a tetra(ethylene glycol) dimethyl ether (TEGDME)-based electrolyte. The first discharge capacity of the as-synthesized PDMcT/PEDOT composite approached 210 mAh g(-1) in the TEGDME-based electrolyte. CV results clearly show that the redox reactions of PDMcT are highly reversible in this TEGDME-based electrolyte. The reversible capacity remained around 120 mAh g(-1) after 20 charge/discharge cycles. With improved cycling performance and very low cost, PDMcT could become a very promising cathode material when combined with a TEGDME-based electrolyte. The poor capacity in the carbonate-based electrolyte is a consequence of the irreversible reaction of the DMcT monomer and dimer with the solvent, emphasizing the importance of electrolyte chemistry when studying molecular-based battery materials.     

Multinuclear copper(I) guanidinate complexes

A series of multinuclear Copper(I) guanidinate complexes have been synthesized in a succession of reactions between CuCl and the lithium guanidinate systems Li{L} (L = Me(2)NC((i)PrN)(2) (1a), Me(2)NC(CyN)(2) (1b), Me(2)NC((t)BuN)(2)(1c), and Me(2)NC(DipN)(2) (2d) ((i)Pr = iso-propyl, Cy = cyclohexyl, (t)Bu = tert-butyl, and Dip = 2,6-disopropylphenyl) made in situ, and structurally characterized. The di-copper guanidinates systems with the general formula [Cu(2){L}(2)] (L = {Me(2)NC((i)PrN)(2)} (2a), {Me(2)NC(CyN)(2)} (2b), and {Me(2)NC(DipN)(2)} (2d) differed significantly from related amidinate complexes because of a large torsion of the dimer ring, which in turn is a result of transannular repulsion between adjacent guanidinate substituents. Attempts to synthesis the tert-butyl derivative [Cu(2){Me(2)NC((t)BuN)(2)}(2)] result in the separate formation and isolation of the tri-copper complexes [Cu(3){Me(2)NC((t)BuN)(2)}(2)(μ-NMe(2))] (3c) and [Cu(3){Me(2)NC((t)BuN)(2)}(2)(μ-Cl)] (4c), both of which have been unambiguously characterized by single crystal X-ray diffraction. Closer inspection of the solution state behavior of the lithium salt 1c reveals a previously unobserved equilibrium between 1c and its starting materials, LiNMe(2) and N,N'-di-tert-butyl-carbodiimide, for which activation enthalpy and entropy values of ΔH(?) = 48.2 ± 18 kJ mol(-1) and ΔS(?) = 70.6 ± 6 J/K mol have been calculated using 1D-EXSY NMR spectroscopy to establish temperature dependent rates of exchange between the species in solution. The molecular structures of the lithium complexes 1c and 1d have also been determined and shown to form tetrameric and dimeric complexes respectively held together by Li-N and agostic Li···H-C interactions. The thermal chemistry of the copper complexes have also been assessed by thermogravimetric analysis.     

苯胺甲基键合固定相的合成和色谱性能

多环芳烃;色谱法;苯胺甲基键合固定相的合成和色谱性能