Photocatalysis within hyperbranched polyethers with a benzophenone core

Quenching and product studies have been performed to demonstrate the suitability of hyperbranched polyethers with a tetrafunctionalized benzophenone core as photocatalysts. The triplet photosensitized transformation of an unsaturated diazo compound has been used as the model reaction. The polymer with highest molecular weight led to a similar product distribution even after several catalytic cycles, which evidences its excellent photostability under prolonged irradiation time. We attribute this to the stabilizing effect of the hyperbranched polymer shell.     

Determination of beta-carboline alkaloids in foods and beverages by high-performance liquid chromatography with electrochemical detection at a glassy carbon electrode modified with carbon nanotubes

Simple and sensitive methods for the separation and quantification of β-carboline alkaloids in foods and beverages by HPLC with electrochemical detection at carbon nanotubes-modified glassy carbon electrodes (CNTs-GCE) are reported. Electrode modification with multi-wall CNTs produced an improved amperometric response to β-carbolines, in spite of the working medium consisting of methanol:acetonitrile: 0.05 mol L⁻¹ Na₂HPO₄ solution of pH 9.0 (20:20:60). On the contrary to that observed at a bare GCE, a good repeatability of the amperometric measurements carried out at +900 mV versus Ag/AgCl (R.S.D. of 3.2% for i_p, n = 20) was achieved at the CNTs-GCE. Using an Ultrabase C₁₈ column and isocratic elution with the above mentioned mobile phase, a complete resolution of the chromatographic peaks for harmalol, harmaline, norharmane, harmane and harmine, was achieved. Calibration graphs over the 0.25-100 μM range with detection limits ranging between 4 and 19 ng mL⁻¹, were obtained. The HPLC-ED at CNTs-GCE method was applied to the analysis of beer, coffee and cheese samples, spiked with β-carbolines at concentration levels corresponding to those may be found in the respective samples. The steps involved in sample treatment, such as extraction and clean-up, were optimized for each type of sample. Recoveries ranging between 92 and 102% for beer, 92 and 101% for coffee, and 88 and 100% for cheese, at sub-μg mL⁻¹ or g⁻¹ analytes concentration levels were achieved.     

Flavonoids and a naphthopyranone from Eriocaulon ligulatum and their mutagenic activity

A new acylated flavonoid, 6,4'-dimethoxyquercetin-3-O-beta-D-6'[3,4,5-trihydroxy (E)-cinnamoyl]glucopyranoside, and a naphthopyranone dimer, named eriocauline, together with 2 other known flavonoids, 6-methoxyapigenin-7-O-beta-D-glucopyranoside and 6-methoxyapigenin-7-O-beta-D-allopyranoside, have been isolated from the capitulae of Eriocaulon ligulatum. The compounds were identified using spectroscopic methods (HR-ESI-MS, and 1-D and 2-D NMR). The methanol extract exhibited mutagenic activity in the Salmonella/microsome assay, in strains TA100, TA97a and TA102 and for dichloromethane extract tested in strain TA98.     

Metabolic fingerprinting using direct flow injection electrospray ionization tandem mass spectrometry for the characterization of proanthocyanidins from the barks of Hancornia speciosa

Direct flow injection electrospray ionization ion trap tandem mass spectrometry (ESI-IT-MS/MS) was used to investigate the polyphenolic compounds present in an infusion from the barks of Hancornia speciosa Gom. (Apocynaceae), a native Brazilian plant popularly known as 'mangabeira', used as a source of nutrition and against gastric disorders. After a simple sample filtration pretreatment the characteristic fingerprint of the infusion was performed in negative ion ESI mode in a few minutes. At low capillary-voltage activation, the deprotonated molecules ([M--H]-) were observed and using collision-induced dissociation the product ion spectra showed the presence of a homologous series of B-type proanthocyanidins, as well as another series containing their respective C-glycosylated derivatives, with a degree of polymerization from 1 up to 6 units of interlinked catechins. Therefore, direct flow injection allowed us to identify the key compounds without preparative isolation of the components.     

Recombinant 3-Hydroxy 3-Methyl Glutaryl-CoA Reductase from <Emphasis Type="Italic">Candida glabrata</Emphasis> (Rec-CgHMGR) Obtained by Heterologous Expression,as a Novel Therapeutic Target Model for Testing Synthetic Drugs

The enzyme 3-hydroxy-3-methyl-glutaryl CoA reductase (HMGR) is a glycoprotein of the endoplasmic reticulum that participates in the mevalonate pathway, the precursor of cholesterol in human and ergosterol in fungi. This enzyme has three domains: transmembrane, binding, and soluble. In this study, we expressed and purified the soluble fraction of the HMGR enzyme from Candida glabrata (CgHMGR) in an Escherichia coli heterologous system and used it as a model for studying its inhibitory activity. The soluble fraction of CgHMGR was fused to the maltose binding protein (MBP), purified, and characterized. Optimal pH was 8.0, and its optimal temperature activity was 37 °C. The k _m and V _max for the HMG-CoA were 6.5 μM and 2.26 × 10^?3 μM min^?1, respectively. Recombinant CgHMGR was inhibited by simvastatin presenting an IC₅₀ at 14.5 μM. In conclusion, our findings suggest that the recombinant HMGR version from C. glabrata may be used as a study model system for HMGR inhibitors such as statins and newly synthesized inhibitor compounds that might be used in the treatment of hypercholesterolemia or mycosis.     

Improvement Production of Hyaluronic Acid by Streptococcus zooepidemicus in Sugarcane Molasses

Microbial hyaluronic acid (HA) production has been preferred rather than extraction from animal tissue for medical and cosmetic applications. In this context, to obtain an economically competitive HA production by Streptococcus zooepidemicus, culture conditions were studied to improve the polymer production in sugarcane molasses. The highest HA production by S. zooepidemicus ATCC 39920 achieved was 2.825 g. L⁻¹ in a 4.5 L bioreactor with controlled pH (8.0) and medium containing molasses (85.35 g.L⁻¹ total sugar) pretreated with activated charcoal and yeast extract (50 g.L⁻¹). The HA produced exhibited a high molecular weight of 1.35 × 10³ kDa and the DPPH radical scavenging activity of the polymer at 1 g.L⁻¹ was 41 %. The FTIR and UV-Vis spectra showed no substantial differences in the spectral pattern between produced and standard HA. This study is a promising strategy for sugarcane molasses application by producing high value-added products such as hyaluronic acid.

     

Comparison of CIM~ C4-HLD monolithic column with Sartobind phenyl membrane column for pIDKE2 purification

The main component of the Center for Genetic Engineering and Biotechnology(CIGB)candidate vaccine against Hepatitis C virus(HCV)is the pIDKE2 plasmid.The current designed downstream process for the production of pIDKE2 fulfils all regulatory requirements and renders the required quantities of pharmaceuticalgrade plasmid DNA(pDNA)with 95%purity.The advantages of this procedure include high plasmid purity and the elimination of undesirable additives,such as toxic organic extractants and animal-derived enzymes.However,yields and consequently the productivity of the process are low.Previous work demonstrated that the most critical step of the process is the reverse phase chromatography,where conventional porous particle resins are used.Therefore,to increase the process productivity,alternative technologies such as membranes and chromatographic monoliths were tested as alternative options for this critical step.Here,a comparison between the behaviors of CIM~ C4-HLD and Sartobind phenyl matrices was performed.To obtain higher productivities and purities,the dynamic binding capacities and selectivities were evaluated.The results showed that both matrices had a similar capacity for pIDKE2 plasmid,but the separation of pDNA isoforms using CIM~ technology was much better than that with Sartobind.Additionally,the optimal conditions for loading plasmid DNA on a CIMC4-HLD 800-mL monolithic column in a real production process were determined.These optimizations will allow production levels to satisfy the high plasmid consumption demanded by clinical trials.     

Magnetic N-doped carbon nanotubes: A versatile and efficient material for the determination of polycyclic aromatic hydrocarbons in environmental water samples

This paper describes a new, efficient and versatile method for the sampling and preconcentration of PAH in environmental water matrices using special hybrid magnetic carbon nanotubes. These N-doped amphiphilic CNT can be easily dispersed in any aqueous matrix due to the N containing hydrophilic part and at the same time show high efficiency for the adsorption of different PAH contaminants due to the very hydrophobic surface. After adsorption, the CNT can be easily removed from the medium by a simple magnetic separation. GC/MS analyses showed that the CNT method is more efficient than the use of polydimethylsiloxane (PDMS) with much lower solvent consumption, technical simplicity and time, showing good linearity (range 0.18–80.00 μg L⁻¹) and determination coefficient (R² > 0.9810). The limit of detection ranged from 0.05 to 0.42 μg L⁻¹ with limit of quantification from 0.18 to 1.40 μg L⁻¹. Recovery (n = 9) ranged from 80.50 ± 10 to 105.40 ± 12%. Intraday precision (RSD, n = 9) ranged from 1.91 to 9.01%, whereas inter day precision (RSD, n = 9) ranged from 7.02 to 17.94%. The method was applied to the analyses of PAH in four lake water samples collected in Belo Horizonte City, Brazil.     

Application of a renormalization-group treatment to the statistical associating fluid theory for potentials of variable range (SAFT-VR)

An accurate prediction of phase behavior at conditions far and close to criticality cannot be accomplished by mean-field based theories that do not incorporate long-range density fluctuations. A treatment based on renormalization-group (RG) theory as developed by White and co-workers has proven to be very successful in improving the predictions of the critical region with different equations of state. The basis of the method is an iterative procedure to account for contributions to the free energy of density fluctuations of increasing wavelengths. The RG method has been combined with a number of versions of the statistical associating fluid theory (SAFT), by implementing White's earliest ideas with the improvements of Prausnitz and co-workers. Typically, this treatment involves two adjustable parameters: a cutoff wavelength L for density fluctuations and an average gradient of the wavelet function Φ. In this work, the SAFT-VR (variable range) equation of state is extended with a similar crossover treatment which, however, follows closely the most recent improvements introduced by White. The interpretation of White's latter developments allows us to establish a straightforward method which enables Φ to be evaluated; only the cutoff wavelength L then needs to be adjusted. The approach used here begins with an initial free energy incorporating only contributions from short-wavelength fluctuations, which are treated locally. The contribution from long-wavelength fluctuations is incorporated through an iterative procedure based on attractive interactions which incorporate the structure of the fluid following the ideas of perturbation theories and using a mapping that allows integration of the radial distribution function. Good agreement close and far from the critical region is obtained using a unique fitted parameter L that can be easily related to the range of the potential. In this way the thermodynamic properties of a square-well (SW) fluid are given by the same number of independent intermolecular model parameters as in the classical equation. Far from the critical region the approach provides the correct limiting behavior reducing to the classical equation (SAFT-VR). In the critical region the β critical exponent is calculated and is found to take values close to the universal value. In SAFT-VR the free energy of an associating chain fluid is obtained following the thermodynamic perturbation theory of Wertheim from the knowledge of the free energy and radial distribution function of a reference monomer fluid. By determining L for SW fluids of varying well width a unique equation of state is obtained for chain and associating systems without further adjustment of critical parameters. We use computer simulation data of the phase behavior of chain and associating SW fluids to test the accuracy of the new equation.     

Comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry for the identification of organobrominated compounds in bluefin tuna

This study evaluates comprehensive two-dimensional gas chromatography (GC×GC) coupled to time-of-flight mass spectrometry (GC×GC-ToF MS) for the simultaneous analysis of several classes of organobromines (OBs), including polybrominated diphenyl ethers (PBDEs), polybrominated biphenyls (PBBs), methoxylated PBDEs (MeO-PBDEs), several halogenated naturally produced compounds (HNPs) and eight novel brominated flame retardants (NBFRs), polybrominated hexahydroxanthene derivates (PBHDs), 2,4,6-tribromoanisole and a mixed halogenated compound (MHC-1), in bluefin tuna muscles. The proposed methodology maximised separation of both within and among OB families, and among these and other halogenated micropollutants detected in these samples and co-extracted matrix components. Special attention has been paid to solve co-elution problems observed during the analysis of OBs with one-dimensional GC-based techniques. Satisfactory separation among several relevant PBDEs and MeO-PBDEs has been obtained allowing their unambiguous determination in a single run. Additional studies were conducted to identify selected NBFRs and HNPs. 2,4-Dibromoanisole, a dibromophenol isomer and hexabromobenzene were identified in the investigated samples. Several new tri- and tetra-BHD derivates were also identified, indicating that these compounds could apparently exist as structured families in nature. In addition, a tetrabrominated diMeO-biphenyl and two tetrabrominated diMeO-BDEs were also tentatively identified.