A new method for obtaining adsorption isotherms on colloidal suspensions via electrokinetic sonic amplitude measurement

The standard methods for obtaining adsorption isotherms on colloidal suspensions are usually very time consuming and involve a large number of steps and assumptions that increase the experimental errors. In this work, an alternative method is proposed to evaluate the adsorption behavior of electrosteric-stabilized systems based on electrokinetic sonic amplitude signal measurements. The new method, entitled "zeta-sorption", is noticeably less time-consuming when compared to conventional procedures but showed great precision and reliability confirmed by comparison with data obtained from conventional routes on alumina-polyacrylate and alumina-citric acid aqueous suspensions. The experimental conditions that restrict the applicability of the new method were identified and justified by discussing the possible ion exchanges.     

Influence of feedstock source on biocatalyst stability and behavior,and on reactor performance,in continuous intensified ethanol fermentation

An ethanol process based on a gas-lift tower fermenter arrangement was used as a model system to show the strong dependence of reactor behavior on the developing chemical environment within the reactor. The reactor performance limits for realistic substrates—starch and molasses—are characterized and compared with those attainable on an ideal substrate, glucose.

     

Chiral comprehensive two-dimensional gas chromatography with electron-capture detection applied to the analysis of chiral polychlorinated biphenyls in food samples

The feasibility of comprehensive two-dimensional gas chromatography with electron-capture detection (GC x GC-ECD) for the enantioseparation of chiral PCBs from other possible interfering compounds has been evaluated. Three commercially available enantioselective beta-cyclodextrin-based capillary columns (Chirasil-Dex, BGB-172 and BGB-176SE) have been tested as first-dimension columns. Three non-enantioselective stationary phases (HT-8, BPX-50 and Supelcowax-10) were combined with the enantioselective columns to allow the unambiguous determination of the enantiomers of the target chiral PCBs. Each enantioselective first-dimension column tested was able to separate into enantiomers different PCB congeners, but in all cases, the use of Supelcowax-10 as second-dimension column provided the most satisfactory results. The Chirasil-Dex x Supelcowax-10 column combination allowed the determination of the enantiomeric fraction (EF) of PCBs 84, 91, 95, 132, 136, 149, 174 and 176 in the working standard solution, while that of congener 135 was hindered. The BGB-172 x Supelcowax-10 column set allowed a proper EF determination of congeners 45, 84, 131, 132, 135, 171, 174 and 183, while that of PCB 91 was interfered with co-elutants. The column combination BGB-176SE x Supelcowax-10 allowed the determination of all congeners that this enantioselective stationary phase was able to separate into enantiomers, i.e. PCBs 45, 91, 95, 136, 149 and 176. These column combinations have also been evaluated for the simultaneous determination of the 12 congeners with a toxic equivalency factor assigned by the WHO (PCBs 77, 81, 105, 114, 118, 123, 126, 156, 157, 167, 169, 189) and the seven indicator congeners (PCBs 28, 52, 101, 118, 138, 153 and 180), and evaluated for the analysis of food samples.     

Formation of dimers that contain unbridged W(IV)/W(IV) double bonds

A tungsten neopentylidene complex has been found to decompose to yield a heterochiral dimer that contains a W=W double bond and no bridging ligands. Decompositions of related bisalkoxide complexes also yield compounds that contain an "unsupported" W=W double bond, while a sample of [Mo(NAr)(CH2-t-Bu)(OC6F5)]2 has been found to be a homochiral species related to [W(NAr)(CH2-t-Bu)(OC6F5)]2.     

Some Comments on the Matter Wave-light Wave Hypothesis

From the de Broglie matter wave hypothesis and Planck’s energy quantization law, and assuming conservation of energy in the absorption of a photon and its consequent conversion to kinetic energy of motion by a material particle initially at rest, one can deduce a simple mathematical relationship between the wavelength λ (or frequency ν), of the photon absorbed by the particle at rest, and the resulting de Broglie matter wave length, λ_D, of the particle with kinetic energy of motion of mv²/2. The relationship so deduced, λ_D∝√λ, suggests that visible wavelengths of light, from about 4000 ?, in the violet, to beyond about 7000 ?, in the red, on absorption by an electron at rest, lead to material electron wavelengths, λ_D, of the order of the size of the electron transfer proteins seen in the photosynthetic reaction centers of photosynthesizing organisms, at about a size of 50–100 ?. In addition to understanding the mechanism of photosynthesis as a material wave mediated phenomenon, further areas of importance of the relations pointed out in this paper are in the design of experiments to gain a deeper understanding of the basic tenets of wave mechanics, and in the use of tunable lasers to probe various properties of material waves, and to precisely control their properties for applications including lithography.     

The scope of catalytic enantioselective tandem carbonyl ylide formation-intramolecular [3 + 2] cycloadditions

Catalytic enantioselective tandem carbonyl ylide formation-intramolecular 1,3-dipolar cycloaddition reactions of 2-diazo-3,6-diketoesters show promising scope in terms of asymmetric induction as the tethered alkene/alkyne dipolarophile component is varied. Cycloadditions were found to occur in moderate to very good yields, with a difference in ee exhibited by the electronically different 2-diazo-3,6-diketoesters 1, 25 and 33, 34. Values for ee of up to 90% for alkene dipolarophiles and up to 86% for alkyne dipolarophiles were obtained.     

Di­chloro­bis(1‐propyl­imidazolidine‐2‐thione‐κS)­cobalt(II)

The crystal structure of the title compound, [CoCl₂(C₆H₁₂N₂S)₂], consists of monomer units of a Co^II atom coordinated to two 1‐propyl­imidazolidine‐2‐thione ligands and to two chloride ions. The heterocyclic thione ligand is monodentate and coordinated to the metal through the thione S atom. The environment around the Co^II atom is a slightly distorted tetrahedron. The Co—S bond lengths are 2.341 (2) and 2.330 (2) Å, and the Co—Cl bond lengths are 2.234 (2) and 2.238 (2) Å. The most important point of distortion is the S—Co—S bond angle of only 97.83 (8)°. Intramolecular classical hydrogen bonds are found between the chloride ions and the N—H groups. Additionally, intra‐ and intermolecular non‐classical hydrogen bonds are found.     

The effect of water or salt solution on thin hydrophobic films

Hydrophobic films of polystyrene synthesized in bulk (PS) and by emulsion polymerization in the presence of the cationic surfactant cetyltrimethylammonium bromide (PS-CTAB) or the anionic surfactant sodium dodecyl sulfate (PS-SDS) were characterized by means of ellipsometry, contact angle measurements, and atomic force microscopy. Thin (approximately 65 nm) and thick (approximately 300 nm) films were spin-coated on hydrophilic silicon wafers. PS films presented scarcely tiny holes, while PS-CTAB and PS-SDS films presented holes and protuberances. The former were attributed to dewetting effects and the latter to surfactant clusters. The films were exposed to water or to a 0.1 mol/L NaCl solution for 24 h. Ex situ measurements evidenced strong topographic alterations after the exposure to the fluid. A model based on the diffusion of water (or electrolyte) molecules to the polymer/silcon dioxide interface through holes or defects on the film edges was proposed to explain the appearance of wrinkles and protuberances. In situ ellipsometric measurements were performed and compared with simulations, which considered either a water layer between a polymer and a silcon dioxide layer or an air layer between a polymer and water (medium). In the case of thin PS films, the ellipsometric angles evidenced a very thin (0.5-1.0 nm) air layer between water and the PS films. Upon increasing the PS film thickness, no air layer could be observed by ellipsometry. Regardless of the thickness, the ellipsometric data obtained for PS-CTAB and PS-SDS films did not indicate the presence of an air layer between them and the aqueous media. The dramatic changes in the topography of PS, PS-CTAB, and PS-SDS after immersion in salt solution were explained with proposed models. From a practical point of view, this study is particularly relevant because many hydrophobic polymers are used as substrates for biomedical purposes, where the physiological ionic strength is 0.15 mol/L NaCl.     

Hypervirial analysis of enclosed quantum mechanical systems. IV. Further comments

New formal results regarding the hypervirial analysis of enclosed systems are given. Novel applications are presented and several previous equations are reformulated in a more appropriate form.     

Vibrational study of the metal-adsorbate interaction of phenylacetic acid and alpha-phenylglycine on silver surfaces

Raman and SERS spectra of phenylacetic acid and alpha-phenylglycine on silver sols have been recorded at several concentrations and pH values. The alpha-phenylglycine has been also studied in D(2)O. The respective vibrational assignments have been proposed and the analysis of the SERS spectra has made it possible to conclude that phenylacetic acid links to the metal through its carboxylate group only, while alpha-phenylglycine links also through its amino group. In both cases the aromatic ring seems to be almost perpendicular to the metal surface. On the other hand, the contribution of the charge transfer (CT) mechanism to the enhancement of the SERS spectra has been calculated as well and it is found to be very important in both molecules. The band most enhanced by this mechanism is that of vibration 8a, mainly in alpha-phenylglycine.