The effect of pyridinecarboxylate chelating groups on the stability and electronic relaxation of gadolinium complexes

The ligand N,N'-bis[(6-carboxy-2-pyridylmethyl]ethylenediamine-N,N'-diacetic acid (H(4)bpeda) was synthesised using an improved procedure which requires a reduced number of steps and leads to a higher yield with respect to the published procedure. It was obtained in three steps from diethylpyridine-2,6-dicarboxylate and commercially available ethylenediamine-N,N[prime or minute]-diacetic acid with a total yield of approximately 20%. The crystal structure of the hexa-protonated form of the ligand which was determined by X-ray diffraction shows that the four carboxylates and the two amines are protonated. The crystal structure of the polynuclear complex [Gd(bpeda)(H(2)O)(2)](3)[Gd(H(2)O)(6)](2)Cl(3)(2), isolated by slow evaporation of a 1:1 mixture of GdCl(3) and H(4)bpeda at pH approximately 1, was determined by X-ray diffraction. In complex three [Gd(bpeda)(H(2)O)(2)] units, containing a Gd(III) ion ten-coordinated by the octadentate bpeda and two water molecules, are connected in a pentametallic structure by two hexa-aquo Gd(3+) cations through four carboxylato bridges. The protonation constants (pK(a1)= 2.9(1), pK(a2)= 3.5(1), pK(a3)= 5.2(2), and pK(a4)= 8.5(1)) and the stability constants of the complexes formed between Gd(III) and Ca(II) ions and H(4)bpeda (log beta(GdL)= 15.1(3); log beta(CaL)= 9.4(1)) were determined by potentiometric titration. The unexpected decrease in the stability of the gadolinium complex and of the calcium complex of the octadentate ligand bpeda(4-) with respect to the hexadentate ligand edta(4-) has been interpreted in terms of an overall lower contribution to stability of the metal-nitrogen interactions. The EPR spectra display very broad lines (apparent DeltaH(pp) approximately 800-1200 G at X-band and 90-110 G at Q-band depending on the temperature), indicating a rapid transverse electron spin relaxation. At X-band, Gd(bpeda) is among the fastest relaxing Gd(3+) complexes to date suggesting that the presence of pyridinecarboxylate chelating groups in itself does not lead to slow electron relaxation.     

Modellrechnungen an einigen Siliziumwasserstoffverbindungen vom Typ SiHn,SiH n + und SiH n − nach der Einzentrenmethode

Zusammenfassung Es werden molekulare Struktur, Energie des Grundzustandes, Bindungsabstände, Bindungsenergie, Ionisierungsenergie und Protonenaffinität der Siliziumwasserstoffverbindungen SiH _n , SiH _n ⁺ und SiH_n ^– (n=3, 4 oder 5) nach der Einzentrenmethode berechnet.

---

OCE-calculations on some silicon hydrides of the type SiH _n , SiH _n ⁺ and SiH _n ^–

OCE-Calculations are reported for molecular structures, ground state energies, bond distances, binding energies, ionization potentials and proton affinities of the silicon hydrides SiH _n , SiH _n ⁺ and SiH _n ^– (n=3, 4 or 5).

---

Résumé Calcul par la méthode monocentrique de la structure moléculaire, de l'énergie de l'état fondamental, des longueurs de liaison, des énergies de liaison, des potentiels d'ionisation et des affinités protoniques pour les hydrures de silicium SiH _n , SiH _n ⁺ et SiH _n ^– (n=3, 4 ou 5).

     

Determination of physiological noble metals in human urine using liquid-liquid extraction and Zeeman electrothermal atomic absorption spectrometry

An extremely sensitive, reliable and simple procedure is described for the determination of physiological palladium, platinum and gold in human urine. The urine samples were adjusted to pH 4 (Pd, Au) or pH 5 (Pt), followed by conversion of the analytes to their pyrrolidinedithiocarbamate complexes. These complexes were separated from the matrix by liquid-liquid extraction into 4-methyl-2-pentanone resulting in a 25-fold enrichment. Determination was by electrothermal atomic absorption spectrometry (ET-AAS) using longitudinal inverse alternating current Zeeman-effect background correction. The limits of detection calculated from three standard deviations of the blank values were 20 ng l⁻¹ for Pd and Au and 70 ng l⁻¹ Pt. Within-day precision (n = 10, 5 μg l⁻¹) ranged 5.2%–7.7%. The procedure is successfully applied to determine urinary palladium, platinum and gold in nine unexposed persons. Palladium levels in urine ranged < 20–80 ng l⁻¹ (arithmetical MEAN=38.7 ng l⁻¹), while gold levels ranged < 20–130 ng l⁻¹ (36.0 ng l⁻¹). Physiological platinum levels in urine were all < 70 ng l⁻¹. The accuracy of the procedure was checked by analyzing a series of urine samples by a second independent method (magnetic sector field inductively-coupled plasma-mass spectrometry) in combination with UV photolysis.     

Estimates for systematic empirical corrections of consistent 4–21G ab initio geometries and their correlations to total energy group increments

The structural parameters of the completely relaxed 4–21G ab initio geometries of more than 30 basic organic compounds are compared to experimental results. Some ranges for systematic empirical corrections, which relate 4–21G bond distances to experimental parameters, are associated with total energy increments. In general, for the currently feasible comparisons, the following corrections can be given which relate calculated distances to experimental r_g parameters and calculated angles to r_s-structures For CC single bond distances, deviations between calculated and observed parameters (r_g) are in the ranges of ?0.006(2) to ?0.010(2) Å for normal or unstrained hydrocarbons; ?0.011(3) to ?0.016(3) Å for cyclobutane type compounds; and +0.001(5) to +0.004(4) Å for CH₃ conjugated with CO. For CO single bonds the ranges are ?0.006(9) to +0.002(3) Å for CO conjugated with CO; and ?0.019(3) to ?0.027(9) Å for aliphatic and ether compounds. A very large and exceptional discrepancy exists for the highly strained ethylene oxide, r_s — r_e = ?0.049(5) Å and in CH₃OCH₃ and C₂H₅OCH₃ the r_s — r_e differences are ?0.029(5), ?0.040(10) and ?0.025(10) Å. Some of these discrepancies may also be due to deficiencies of the microwave substitution method caused by atomic coordinates close to inertial planes. For CN bonds, two types of NCH₃ corrections are from +0.005(6) to ?0.006(6) and from ?0.009(2) to ?0.014(6) Å; and the range for NCO is +0.012(3) to +0.028(4) Å. For isolated CC double bonds the range is + 0.025(2) to +0.028(2) Å. For conjugated CC double bonds the correction is less positive (+0.014(1) Å for benzene). For CO double bonds the corrections are ?0.004(3) to +0.003(3) Å. For bond angles of type HCH, CCH, CCC, CCO, CCO, OCO, NCO and CCC the corrections are of the order of magnitude about 1–2° (or better). Angles centered at heteroatoms are less accurate than that, when hydrogen atoms are involved. Differences in HOC and NHC angles were found in a range of ?2.3(5)° to ?6.2(4)°.     

Electron-diffraction study of hydrogen isotope effects in cyclohexane

The electron-diffraction data for cyclohexane and perdeuterated cyclohexane were analyzed and the results were compared. It was found that r_g(C-C) = 1.535 Å (±0.002) for both compounds; r_g (C-H) = 1.116 Å (±0.004) and r_g(C-D) = 1.109 Å (±0.003). Observed hydrogen isotope effects in mean amplitudes agree very well with calculated ones. The C-C bond distance of cyclohexane is in good agreement with some of the previous studies, which is of importance in view of a recent scaling controversy involving this parameter.     

Perfluoro anion-exchange polymeric films on glassy carbon electrodes

Solutions of the perfluoro anion-exchange membrane TosHex® in a solvent mixture composed of methanol + isopropanol + water (1:1:1) were prepared and applied in coating glassy carbon electrodes. The evaporated films were used to accumulate the Fe(CN) ₆ redox couple on the electrode surface. The magnitude of the electrochemical response of the loaded films is comparable with that for Nafion® incorporated cationic redox species. The multicharged Fe(CN) ₆ couple accumulated in Tosflex® film causes an ion cross-linking of the polymeric backbone, thus decreasing ion transport in the film substantially.     

Synthese und Struktur hochfunktionalisierter 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaborole

Synthesis and Structure of Highly Functionalized 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaboroles A series of differently substituted 2, 3‐dihydro‐1H‐1, 3, 2‐diazaboroles has been prepared by various methods. 1, 3‐Di‐tert‐butyl‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 7 ), 2‐isobutyl‐1, 3‐bis(1‐cyclohexylethyl)‐1H‐1, 3, 2‐diazaborole ( 8 ), 1, 3‐bis‐(1‐cyclohexylethyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 9 ) 1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2diazaborole ( 10 ) and 2‐bromo‐1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐1H‐1, 3, 2‐diazaborole ( 11 ) were formed by reaction of the corresponding 1, 4‐diazabutadienes with the boranes Me₃SiCH₂BBr₂, iBuBBr₂ and BBr₃ followed by reduction of the resulting borolium salts [R¹ = tBu, Me(cHex)CH, [Me(Et)Ph]C; R² = Me₃SiCH₂, iBu, Br] with sodium amalgam. Treatment of 11 and 12 with silver cyanide afforded the 2‐cyano‐1, 3, 2‐diazaboroles 13 and 14 . An alternative route to compound 8 is based on the alkylation of 2‐bromo‐1, 3, 2‐diazaborole 12 with isobutyllithium. Equimolar amounts of 13 and isobutyllithium give rise to the formation of 15 . The new compounds were characterized by ¹H‐, ¹³C‐, ¹¹B‐NMR, IR and mass spectra. The molecular structures of 7 and meso ‐10 were confirmed by x‐ray structural analysis.     

Ab initio studies of structural features not easily amenable to experiment: Part 20. Structural aspects of ethyl groups

The molecular structures of a number of stable conformations of ethanol, ethylamine, methylethyl ether, methylethylamine and of the ethyl anion have been determined by ab initio geometry optimizations using Pulay's Force method on the 4–21G level. The calculated geometries characterize the extent to which structural groups in a molecule are sensitive to asymmetries in their environment. Characteristic structural trends are consistently found for the CH bond distances and CCH angles in the C₂H₅ groups of trans-ethanol, trans-methylethyl ether and in the ethyl anion. They differ from those previously found for C₂H₅ groups in hydrocarbons. There is qualitative disagreement between the trends calculated for CH bond distances in trans-ethanol and trans-methylethyl ether and those found in the microwave substitution structures of these compounds. Since the substitution parameters are unresolved because of relatively large experimental or model uncertainties, it is presently impossible to decide whether this discrepancy is the result of computational or experimental deficiency. The methyl groups in methylethyl ether and methylethylamine exhibit the characteristic structural distortions which are usually found for CH₃ groups adjacent to electron lone pairs. The CC bond distances in C₂H₅ in the systems studied here are sensitive to the conformational arrangement of ethyl relative to the rest of a system in a way which can be rationalized by orbital interactions involving antibonding orbitals on sp³-hybridized carbon atoms. The calculated conformational stabilities agree qualitatively with experimental trends, except in the case of ethanol where the trans — gauche energy difference is small (about 0.1 kcal mol^?1) and within the uncertainties of the calculations. Our conformational energies for CH₃CH₂NH₂ are in disagreement with a previous ab initio investigation based on a comparison of unoptimized standard geometries. In general, the agreement between calculated structural parameters and corresponding reliable experimental values is very good in all comparable cases.     

Ab initio studies of structural features not easily amenable to experiment: the molecular structures of some hydrogenfluoride clusters

The completely relaxed ab initio structures of some forms of H₂F₂ and H₃F₃ reflect the cooperative nature of hydrogen bonding and can be used to estimate the order of magnitude of the variations in local geometry which are neglected when interactive potentials for HF in clusters or in the liquid state are evaluated with constrained geometries.