An analytical model to estimate the performance of an indoor barrier at low-medium frequencies

Indoor barriers are now widely used for sound insulation. This paper examines the performance of indoor barriers in the low-medium frequency range and analyses the interaction between different natural modes of a room-barrier-room system. Morse proposed a theoretical model to calculate the sound field in a coupled-room, but this model neglects the surface integral of the boundary values of sound pressure. To estimate the performance of a barrier in an indoor environment, an analytical model is proposed that modifies the Green’s function for a non-rigid boundary enclosure and approximates the surface integral by a pre-estimated sound pressure based on Morse’s model. An additional approximation has been made in the proposed model to neglect the coupling area in the calculation of the surface integral. The proposed model used to predict the insertion loss of the barrier is verified by the experimental results using a 1:5 scale model. The predicted results agree well with the measured results at lower frequencies.     

Runge–Kutta discontinuous Galerkin method using WENO limiters II: Unstructured meshes

In [J. Qiu, C.-W. Shu, Runge–Kutta discontinuous Galerkin method using WENO limiters, SIAM Journal on Scientific Computing 26 (2005) 907–929], Qiu and Shu investigated using weighted essentially non-oscillatory (WENO) finite volume methodology as limiters for the Runge–Kutta discontinuous Galerkin (RKDG) methods for solving nonlinear hyperbolic conservation law systems on structured meshes. In this continuation paper, we extend the method to solve two-dimensional problems on unstructured meshes, with the goal of obtaining a robust and high order limiting procedure to simultaneously obtain uniform high order accuracy and sharp, nonoscillatory shock transition for RKDG methods. Numerical results are provided to illustrate the behavior of this procedure.     

图形处理器并行计算用于离子发动机粒子模拟

 为了研究离子发动机羽流对航天器的影响,采用质点网格-蒙特卡罗碰撞方法对离子发动机羽流中的交换电荷离子进行了模拟。利用计算设备统一架构技术,开发出一套基于图形处理器的并行粒子模拟程序。随机数生成采用并行MT19937伪随机数生成器算法,电场方程使用完全近似存储格式的代数多重网格法求解。r-z轴对称坐标系中,在z=0 m处获得的电流密度均值为4.5×10^-5 A/m²,图形处理器所得结果与中央处理器模拟结果吻合。在16核心的NVIDIA GeForce 9400 GT图形显示卡上,取得相对于Intel Core 2 E6300中央处理器4.5~10.0倍的加速比。     

Polarization beam splitter based on photonic crystal self-collimation Mach-Zehnder interferometer

A polarization beam splitter based on a self-collimation Mach-Zehnder interferometer (SMZI) in a hole-type silicon photonic crystal was proposed and numerically demonstrated. Utilizing polarization dependence of the transmission spectra of the SMZI and polarization peak matching (PPM) method, the SMZI can work as a polarization beam splitter (PBS) by selecting appropriate path length difference in the structure. Because of its intrinsic operating principle, the PBS possesses high polarization extinction ratios (PERs). As its dimensions are only several operating wavelengths, the PBS may have practical applications in photonic integrated circuits.     

用A238U超核聚变检验裂变机制的可行性探讨

超核_A²³⁸U的裂变的剪断过程,用不断上升的势垒模拟,对不同的剪断过程(恒速或加速),对A末态激发几率(布居于轻裂块的几率)作了计算,分别为27%或31%。有待实验检验。     

Li2O-B2O3-P2O5系统非晶态混合骨架效应的NMR研究

用核磁共振对非晶态中B³⁺离子的微观结构进行了测定,结合Raman光谱的研究,对Li₂O-B₂O₃-P₂O₅系统非晶态的性能(电导率、密度等)在P₂O₅/B₂O₃比约等于1时产生极值的原因从理论上作了阐明。     

本体聚合反应过程中聚甲基丙烯酸甲酯增长自由基的ESR研究

采用TM₁₁₀谐振腔和φ2mm样品管,在17℃室温条件下成功地记录了MMA本体聚合反应过程中增长自由基的ESR谱。当把DMA加入到MMA和BPO中后,立即抽取0.17ml混合液到φ2mm样品管并记谱。以后每隔2分钟记谱一次,波谱从13(5+8)条线逐渐变成9(5+4)条线。我们用阻碍振荡模型和构象重叠模型作了模拟。从全部谱图看,前者似更合理些。ESR实验表明:在聚合过程前期,自由基浓度基本保持不变,但从聚合中期的某一时刻开始,浓度剧增,它正好同步地与本体聚合反应的自加速效应相对应,而且其变化规律和单体转化率相平行。最后,我们用微波功率饱和方法观测到9线谱的协同自旋跳跃所产生的卫线,证明了主导的电子自旋晶格弛豫机理来自电子一核自旋间的偶极偶合角调制。     

The energy exchange and the optimum length of the sample tube of opfirl

The energy exchange between the pumping laser and FIR signal in the optically pumped FIR laser (OPFIRL) system was studied. The iteration method has been used to calculate the power density of the pumping and FIR signals at any point along the optical axis of the sample tube. It was found that the power density of the FIR signal did not always increase along the length of the laser tube. There was a maximum FIR power density at the appropriate point in the sample tube. If the distance of maximum power point from the entrance of the OPFIRL tube was taken as the length of sample tube Z_opt, the maximum FIR laser output should be obtained. This was the optimum length of OPFIRL tube. The value of Z_opt was closely related to the parameter of OPFIRL such as the pumping power density, the pumping detuning and the frequency of the FIR laser. The energy-exchange and the maximum output of the fir laser were calculated under the ideal condition.     

甲基二氯硅烷—甲苯等压汽液平衡研究

用泵式沸点仪测定了甲基二氯硅烷—甲苯二元系在常压下的汽液平衡数据,并用间接法由ＴＰＸ 推算了与之平衡的汽相组成,用最小二乘法求出了该系统的液相活度系数模型参数,由模型参数推算的泡点温度与实验值符合良好,所得数据通过了热力学一致性检验。     

圆薄板非对称大变形弯曲问题

本文首先导出圆薄板非轴对称大变形问题的位移基本方程及边界条件.利用变换和摄动法将非线性位移方程线性化,得到了近似边值问题.作为算例,文中研究了圆薄板在较复杂载荷作用下的非线性弯曲问题.