Hydrophilic polymer membranes containing carboxylic groups—I. Acrylic acid—methyl methacrylate—glycidyl methacrylate copolymers

Copolymers of acrylic acid, methyl methacrylate and glycidyl methacrylate have been synthesized and converted into cross-linked hydrophilic membranes by successive treatments with heat, alkali solution and acidic solution. The copolymerization was carried out in solution using tetrahydrofuran and p-dioxane as solvents. The polymer was obtained as a clear viscous solution at yields of approximately 95%. The polymerization was stopped before gelation took place. This gelation resulted from the reaction of epoxy and carboxylic groups of the polymeric chain. The polymerization time ranged from 3.5 to 7 hr depending on the content of the glycidyl methacrylate in the feed. The monomer mixture consisted of 25–45 mol% of acrylic acid, 40–70 mol% of methyl methacrylate and 2.5–15 mol% of glycīdyl methacrylate. With increasing content of acrylic acid, the membranes became soft and elastic; with decreasing content, they became brittle and hydrophobic. The swelling of the cured polymeric film increased with increase in the acrylic acid content of the monomer mixture and decreased with increasing glycidyl methacrylate content. Dialysis runs were conducted with sodium chloride, urea and a series of ethylene glycols with molecular weights up to 600. The permeability coefficients through the membranes for the ethylene glycols were similar to those through a commercial cellulose membrane (Cuprophane). The permeability proportional to $\text{(permeant molecular wt)}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}$. The membranes showed very low permeabilities to sodium chloride compared with those of commercial nonionic membranes. This appears to be due to the ionic exclusion mechanisms expected for ion exchange membranes.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Studies on metal — protein interactions: Inter-comparison among various approaches

Binding ability of mercury, thallium, lead and bismuth with Erythrina variegata seed protein have been investigated using tracer packet technique. Due to the lack of standard methods, inter-comparisons have been made among three different approaches, like trichloroacetic acid (TCA) precipitation, isoelectric precipitation and dialysis of protein after incubation with the metals. Good agreement was observed for all the cases except that of lead.     

Molecular self-assembled monolayers of ruthenium(II)-terpyridine dithiol complex on gold electrode and nanoparticles

We describe the formation of stable dithiol-bifunctionalized Ru(II)-terpyridine monolayer onto gold electrode. The coverage-dependent behavior onto gold electrode has been studied by electrochemical technique. The stability, surface charge coverage, and electron-transfer kinetics were assessed by cyclic voltammetry. Functionalized monolayer-protected Au clusters (MPCs) were also prepared. The spectroscopic characterization data of MPCs using UV-Vis and TEM techniques are discussed. TEM images showed that functionalized spherical nanoclusters of 4.7 ± 0.3 and 4.3 ± 0.2 nm were produced. The particle sizes are uniform with a narrow size distribution. The morphology of Au(1 1 1) metal surface modified with MPCs was imaged using atomic force microscopy (AFM). The nanoparticle layer exhibits a distinct surface morphology, irregularly shaped domains with dimensions from 20 to 60 nm and root mean square heights of 2.401 nm.     

固液相变的分子动力学研究Ⅰ─—(KI)_(108)离子簇的熔化和凝固(英)

通过分子动力学模拟，考查并分析了（KI）108离子簇的结构、能量和相变的动力学行为．在加热和冷却过程中，离子簇再现了熔化和凝固现象，而且熔化起始于立方体的其一顶点，熔化的离子簇不是球形的，说明了离子簇的非湿特征．根据结晶的成核速率，讨论了电子衍射实验中观察KI凝固的可能性     

高阻隔材料——偏氯乙烯悬浮共聚树脂

本文介绍偏氯乙烯悬浮共聚树脂的优异阻隔性能、合成配方与工艺。     

Mammalian cell growth studiedin situ by fourier transform infrared spectroscopy

Fourier transform infrared techniques were used to monitor mammalian cell growth plated on attenuated total reflection (ATR) crystals. Consistently, the growth kinetics plots generated from the obtained spectra demonstrated a sigmoidal curve representing a sequence of slow, rapid, then tapering cell growth which correlated well with non-spectral cell growth determinations. Significant advantages over traditional methods of measuring cell growth kinetics are demonstrated. The technique has promising potential to be used to study events in areas such as toxicology and cell biology.     

钼铁混合金属原子簇化合物[(η5-C5H5)4Mo4Fe2(μ3-S)5(CO)5]的合成和结构

(η~5-C_5H_5)_4Mo_4Fe_2(μ_3-S)_5(CO)_5 have been prepared from (η~5-C_5H_5)_2Mo_2(CO)_6 and Fe_8S_2(CO)_9 under toluene reflux for 14.5 hrs.The crystal and molecular structures of (η~5-C_5H_5)_4Mo_4Fe_2(μ_3-S)_5(CO)_5 were studied by X-ray structure analysis. The Crystallographic data are as follows: monoclinic, space group P2_1/n, unit cell: a=1.0589(4), b=1.7260(4), c=1.8963(4) nm, β=101.44(2)°, V=3.3967 nm, D_c=2.06 gcm~(-3) for Z=4, X-ray data were obtained over the range of 2°<2θ<50° via the ω-2θ scan mode with MoKα radiation on an Enraf-Nonius CAD4 diffractometer. The structure was solved by direct method (MULTAN) and refined by full matrix least-squares techniques for 3993 reflections with I>2σ(I), The final R=0.081. Figure 1 illustrates the configuration of the molecule (η~5-C_5H_5)_4Mo_4Fe_2(μ_3-S)_5(CO)_5, composing of a cubane-like (FeMo_3S_4) core and a trigonal pyramid (MoFe_2S) core, which linked by sharing Fe(1) atom.     

Analysis of double-stranded DNA by microchip capillary electrophoresis using polymer solutions containing gold nanoparticles

The impact of gold nanoparticles (GNPs) on the microchip electrophoretic separation of double-stranded (ds) DNA using poly(ethylene oxide) (PEO) is described. Coating of the 75-microm separation channel on a poly(methyl methacrylate) (PMMA) plate in sequence with poly(vinyl pyrrolidone), PEO, and 13-nm GNPs is effective to improve reproducibility and resolution. In this study, we have also found that adding 13-nm GNPs to 1.5% PEO is extremely important to achieve high resolution and reproducibility for DNA separation. In terms of the stability of the GNPs, 100 mM glycine-citrate buffer at pH 9.2 is a good buffer system for preparing 1.5% PEO. The separation of DNA markers V and VI ranging in size from 8 to 2176 base pairs has been demonstrated using the three-layer-coated PMMA microdevice filled with 1.5% PEO containing the GNPs. Using these conditions, the analysis of the polymerase chain reaction products of UGT1A7 was complete in 7 min, with the relative standard deviation values of the peak heights and migration times less than 2.3% and 2.0%, respectively. In conjunction with stepwise changes of the concentrations of ethidium bromide (0.5 and 5 microg/ml), this method allows improved resolution and sensitivity for DNA markers V and VI.     

N-trifluoroacetyl sialyl phosphite donors for the synthesis of alpha(2 --> 9) oligosialic acids

[reaction: see text] A new method for the synthesis of alpha(2 --> 9) oligosialic acids is developed using phosphite sialyl donors that are protected with a C-5 N-trifluoroacetyl (NHTFA) substituent. Compared with conventional donors, these donors gave a higher degree of alpha-anomeric selectivity during glycosidic bond formation and better yields during iterative sialylation in the synthesis of oligosialic acids.