Top-down protein sequencing by CID and ECD using desorption electrospray ionisation (DESI) and high-field FTICR mass spectrometry

We report high resolution spectra for the medium molecular weight proteins myoglobin and cytochrome-c obtained using a custom desorption electrospray ionisation (DESI) source coupled to a Bruker Daltonics 12 T Apex Qe Fourier transform ion cyclotron resonance mass spectrometer (FTICR-MS). The DESI source was designed for accurate alignment and reproduction of critical geometric variables. A two axis motorised stage was included to enable automated rastering of the sample under the DESI plume. Spectra for the intact proteins have been obtained under single-acquisition conditions and a top-down analysis of cytochrome-c was performed using both collision induced dissociation (CID) and electron capture dissociation (ECD) of the isolated [M+15H]¹⁵⁺ charge state. The sequence coverage is comparable to that obtained using electrospray ionisation, demonstrating the utility of top-down protein analysis by DESI FTICR-MS.     

堆焊熔敷层表面纳米晶层摩擦磨损性能研究

用预压力滚压技术在堆焊修复层表面制备纳米晶层.利用TEM、SEM分析技术研究表面纳米晶层微观结构,利用CETR-3型多功能摩擦磨损试验机考察在干摩擦条件下堆焊层表面纳米晶层的摩擦磨损性能.结果表明堆焊修复层表面经表面纳米化处理后,表面形成厚度约为10μm(晶粒尺寸小于100 nm)的纳米晶层,最表面层平均晶粒尺寸约为10 nm.纳米压痕试验表明纳米晶层的硬度提高,最表面纳米晶层的硬度约为原始堆焊层硬度的3倍.与原始堆焊试样相比,表面纳米化试样的摩擦系数降低了10%,磨损体积降低了25%~30%左右.表面纳米化样品的磨损机制由原始堆焊层的磨粒磨损和黏着磨损转变为磨粒磨损,分析表明晶粒细化导致的高硬度、低塑性是摩擦磨损性能改善和磨损机制改变的主要原因.     

Power generation using an activated carbon and metal mesh cathode in a microbial fuel cell

An inexpensive activated carbon (AC) air cathode was developed as an alternative to a platinum-catalyzed electrode for oxygen reduction in a microbial fuel cell (MFC). AC was cold-pressed with a polytetrafluoroethylene (PTFE) binder to form the cathode around a Ni mesh current collector. This cathode construction avoided the need for carbon cloth or a metal catalyst, and produced a cathode with high activity for oxygen reduction at typical MFC current densities. Tests with the AC cathode produced a maximum power density of 1220 mW/m² (normalized to cathode projected surface area; 36 W/m³ based on liquid volume) compared to 1060 mW/m² obtained by Pt catalyzed carbon cloth cathode. The Coulombic efficiency ranged from 15% to 55%. These findings show that AC is a cost-effective material for achieving useful rates of oxygen reduction in air cathode MFCs.     

State‐of‐the‐art all‐silicon sub‐bandgap photodetectors at telecom and datacom wavelengths

Silicon‐based technologies provide an ideal platform for the monolithic integration of photonics and microelectronics. In this context, a variety of passive and active silicon photonic devices have been developed to operate at telecom and datacom wavelengths, at which silicon has minimal optical absorption ‐ due to its bandgap of 1.12 eV. Although in principle this transparency window limits the use of silicon for optical detection at wavelengths above 1.1 μm, in recent years tremendous advances have been made in the field of all‐silicon sub‐bandgap photodetectors at telecom and datacom wavelengths. By taking advantage of emerging materials and novel structures, these devices are becoming competitive with the more well‐established technologies, and are opening new and intriguing perspectives. In this paper, a review of the state‐of‐the‐art is presented. Devices based on defect‐mediated absorption, two‐photon absorption and the internal photoemission effect are reported, their working principles are elucidated and their performance discussed and compared.

     

Polymeric cross-linked surface treatments for controlling block copolymer orientation in thin films

The orientation of cylinder-forming poly(styrene-block-methyl methacrylate) [P(S-b-MMA)] was investigated on two sets of polymeric surface treatments: 10 para-substituted polystyrene derivatives with <10 mol % poly(4-vinylbenzyl azide) and a series of poly(styrene-random-4-vinylbenzyl azide) [P(S-r-VBzAz)] copolymers with 5-100 mol % poly(4-vinylbenzyl azide). The copolymers were spin-coated to form thin films and then cross-linked by heating. The resulting films exhibited a range of surface tensions from 21 to 45 dyn/cm. Perpendicular orientation of P(S-b-MMA) cylinders was achieved with poly(p-bromostyrene) and all the [P(S-r-VBzAz)] copolymer surface treatments, most notably the homopolymer of poly(4-vinylbenzyl azide). Films made from these simple copolymers are as effective as random terpolymer alignment layers commonly made from both block monomers and a cross-linkable monomer.     

Mapping a Noncovalent Protein–Peptide Interface by Top-Down FTICR Mass Spectrometry Using Electron Capture Dissociation

Noncovalent protein–ligand and protein–protein complexes are readily detected using electrospray ionization mass spectrometry (ESI MS). Furthermore, recent reports have demonstrated that careful use of electron capture dissociation (ECD) fragmentation allows covalent backbone bonds of protein complexes to be dissociated without disruption of noncovalent protein–ligand interactions. In this way the site of protein–ligand interfaces can be identified. To date, protein–ligand complexes, which have proven tractable to this technique, have been mediated by ionic electrostatic interactions, i.e., ion pair interactions or salt bridging. Here we extend this methodology by applying ECD to study a protein–peptide complex that contains no electrostatics interactions. We analyzed the complex between the 21 kDa p53-inhibitor protein anterior gradient-2 and its hexapeptide binding ligand (PTTIYY). ECD fragmentation of the 1:1 complex occurs with retention of protein–peptide binding and analysis of the resulting fragments allows the binding interface to be localized to a C-terminal region between residues 109 and 175. These finding are supported by a solution-phase competition assay, which implicates the region between residues 108 and 122 within AGR2 as the PTTIYY binding interface. Our study expands previous findings by demonstrating that top-down ECD mass spectrometry can be used to determine directly the sites of peptide–protein interfaces. This highlights the growing potential of using ECD and related top-down fragmentation techniques for interrogation of protein–protein interfaces.     

Green microfluidic devices made of corn proteins

An alternative green microfluidic device made of zein, a prolamin of corn, can be utilized as a disposable environmentally friendly microchip especially in agriculture applications. Using standard soft lithography and stereo lithography techniques, we fabricated thin zein films with microfluidic chambers and channels. These were bonded to both a glass slide and another zein film. The zein film with microfluidic features bonds irreversibly with other surfaces by vapor-deposition of ethanol to create an adhesive layer resulting in very little or no trapped air and small shape distortion. Zein-zein and zein-glass microfluidic devices demonstrated sufficient strength to facilitate fluid flow in a complex microfluidic design that showed no leakage under high hydraulic pressure. Zein-glass microfluidic devices with serpentine mixing design showed successful fluid manipulation as a concentration gradient of Rhodamine B solution was generated. The ease of fabrication and bonding and the flexibility and moldability of zein offer attractive possibilities for microfluidic device design and manufacturing. These devices can include several unit operations with mixing being one of the most commonly used. The zein-based microfluidic devices, made entirely from a biopolymer from agricultural origin, offer alternative environmentally friendly material choices that are less dependent on limited petroleum based polymer resources.