板条增益介质波前畸变诊断方法

对波前重构算法中的区域法进行了改进,使其能够应用于板条增益介质的波前畸变诊断。利用该方法对47块Nd: YAG板条增益介质沿厚度方向波前畸变进行测量,指出镀膜和加工等环节对增益介质的波前畸变可能造成的影响。按照波前畸变峰谷（PV）值对测量结果进行了统计,结果表明:增益介质造成的静态波前畸变参差不齐,测量样本中静态畸变PV值最多可达5 m以上,且仅有4.1%的增益介质静态畸变PV值小于1 m。通过选取某些增益介质使之级联,测量其组合波前畸变,发现在系统中使用两块波面互补的增益介质有助于减小系统的静态波前畸变。     

超导纳米线单光子探测器动态电感研究

单光子探测是一种量子极限光信号的检测技术,超导纳米线单光子探测器(Superconducting NanowireSingle-Photon Detector,SNSPD)作为一种新型的单光子探测技术,在量子通信等众多领域有着广阔的应用前景。SNSPD的动态电感直接决定了SNSPD的工作速度。文中对SNSPD动态电感的特性和测试方法做了详细的研究,成功实现了低温下SNSPD动态电感的测试,并对结果进行了分析处理和研究。利用BCS理论对动态电感随温度、偏置电流变化的特性进行分析计算,并与实际测量结果对比讨论,为未来如何降低SNSPD动态电感、提高其性能的研究工作提供了参考依据。     

CW single transverse mode all-fiber Tm3+-doped silica fiber laser

The CW 25.6 W output power with a slope efficiency of 30.6% respected to the pump power from a CW single transverse mode all-fiber Tm³⁺-doped Silica Fiber Laser is reported. The all-fiber laser is made up by progressively splicing the pigtail fiber, matched FBG fiber and Tm fiber. The reflective FBG and Tm³⁺-doped fiber end Fresnel reflection build up the laser resonance cavity. Due to the multi-mode FBG as the reflective mirror, the output laser spectrum is multi-peaks at high output power, but the spectrum width is less than 2 nm at 1.94 μm. We estimate the beam quality to be M ² = 2.39, clearly indicating nearly diffraction-limited beam propagation.     

采用吸收修正Bronnikov算法的有机复合样品的X射线显微计算机层析研究

有机复合样品如大多数由低原子序数物质构成的多聚物组合材料、生物软组织等具有混合相位和振幅特性,采用传统吸收计算机层析(CT)或纯相位重构算法难以达到较高密度分辨的目的。采用基于吸收修正的Bronnikov相位恢复算法的X射线同轴相衬CT技术对高分子混合组份材料和药物医学样品进行了实验研究。结果表明该相位恢复算法可以实现多聚物组合材料的无损分辨和精确测量,能够清晰辨别各组份材料的电子密度分布;验证了药物样品多孔性结构三维测量的可行性,能够有效提供孔隙测量的阈值选择。该方法在材料科学尤其是聚合物组合材料、泡沫多孔材料都会发挥很好的作用;单距的低辐射优势,尤其适用于生物医学样品三维无损成像。     

One-step synthesis of three-dimensional Pd polyhedron networks with enhanced electrocatalytic performance

Three-dimensional Pd polyhedron networks (Pd PNs) have been fabricated for the first time through a one-step, Cu(2+)-assisted, solution-chemical approach. These as-prepared 3D Pd PNs exhibit high stability and remarkably improved electrocatalytic activity toward formic acid oxidation over commercially available Pd black.     

Carbon self-doping induced high electronic conductivity and photoreactivity of g-C3N4

We theoretically and experimentally demonstrate that carbon self-doping could induce intrinsic electronic and band structure change of g-C(3)N(4)via the formation of delocalized big π bonds to increase visible light absorption and electrical conductivity as well as surface area and thus enhance both photooxidation and photoreduction activities.     

High performance low band gap polymer solar cells with a non-conventional acceptor

A novel C70 fullerene derivative was designed and synthesized by [4+2] cyclic addition reaction between indene derivative (methyl 1H-indene-3-carboxylate) and C70. The absorption and photoluminescence of H120 and its mixed films with different polymer donor materials were investigated, as well as its electrochemical property and electron mobility. It was found that H120 has 0.05 eV higher LUMO level than that of PC(70)BM. Its electron mobility reached 6.32 × 10(-4) cm(2) V(-1) s(-1), which is slightly lower than 9.55 × 10(-4) cm(2) V(-1) s(-1) of PC(70)BM. The photovoltaic devices based on P3HT, and two high efficiency low band gap polymers, PBDTTT-C and PBDTTDPP as donors, with H120 as an acceptor gave power conversion efficiencies of 4.2%, 6.0% and 6.2%, respectively.     

Evaluation of thermal hazard for lauroyl peroxide by VSP2 and TAM III

When above certain temperature limits, lauroyl peroxide is an unstable material. If the thermal source cannot be properly governed during any stage in the preparation, manufacturing process, storage or transport, runaway reactions may inevitably be induced immediately. In this study, the influence of runaway reactions on its basic thermal characteristic was assessed by evaluating thermokinetic parameters, such as activation energy (E _a) and frequency factor (A) by thermal activity monitor III (TAM III). This was achieved under five isothermal conditions of 50, 60, 70, 80, and 90?°C. Vent sizing package 2 (VSP2) was employed to determine the maximum pressure (P _max), maximum temperature (T _max ), maximum self-heating rate ((dT?dt ^?1)_max), maximum pressure rise rate ((dP?dt ^?1)_max), and isothermal time to maximum rate ((TMR)_iso) under the worst case. Results of this study will be provided to relevant plants for adopting best practices in emergency response or accident control.     

Synthesis of ratiometric fluorescent nanoparticles for sensing oxygen

A facile reprecipitation-encapsulation method is used for the preparation of ratiometric fluorescent nanoparticles (NPs) for sensing intracellular oxygen. The surface of the NPs is modified in-situ with poly-L-lysine, which renders good biocompatibility and enables easy internalization into living cells. The sensor NPs contain a red fluorescent probe whose fluorescence is sensitive to oxygen with a quenching response of 77 % on going from nitrogen saturation to oxygen saturation, and a reference dye giving a green signal that acts as an oxygen-independent reference. The ratio of the two emissions serves as the analytical information and is sensitive to dissolved oxygen in the 0–43?ppm concentration range. When incorporated into cells, the ratio of the signals increases by 400?% on going from oxygen-saturated to oxygen-free environment.