少周期非均匀场下原子空间位置对高次谐波发射的影响

本文通过数值求解含时薛定谔方程,研究了少周期非均匀激光脉冲作用下氦原子选取不同的空间位置时高次谐波的发射情况.通过对原子在纳米结构空隙中心附近区域不同空间位置上的高次谐波发射情况的研究发现,非均匀激光场中,即使原子处在中心附近的很小的区域内,原子的空间位置也直接影响着高次谐波发射.随着空间内原子坐标的增大,高次谐波的截止得到扩展,且谐波平台区并非单向扩展,而是向两端同时的扩展.通过时频分析和半经典三步模型研究了高次谐波发射的物理机制,并对获得的物理现象给出合理的解释.     

撞击诱导硝基甲烷分子第一步分解反应的动力学计算

本文基于分子温度与压强的关系,计算在不同压强下基态和最低三态硝基甲烷的分子温度,对应计算其沿着CN键裂解反应的热化学和动力学参数.发现基态的硝基甲烷沿着CN键的分解反应是吸热反应,不具自发性,反应转换温度为1550.2 K,平衡常数在80-1202 K温度范围内很低.最低三态的硝基甲烷沿着CN键的裂解是放热反应,反应的Gibbs自由能在80-2558.5 K范围内为负,有好的自发性,且反应较为彻底.298.15-2558.5 K温度范围内反应活化能随着温度的升高而改变,使反应速率随着温度的升高而急剧增大.对应硝基甲烷爆压15 GPa,其分子温度为4617.6 K,该温度下三态分子分解反应的反应速率为1.088×10~8cm~3·mol~(-1)·s~(-1).推算硝基甲烷沿着CN键分解反应混合物的终态温度,当混合物为硝基、甲基和基态的硝基甲烷分子时,反应的终温为1611.37 K,等效能为1676.47 cm~(-1).当混合物为硝基、甲基、基态和最低三态的硝基甲烷分子时,反应的终温为1184.79 K,等效能为1232.65 cm~(-1).两种情况下终态等效能都足以维持硝基甲烷分子沿C-N键裂解反应的发生.这个能量也足以导致混合物中的NO_2分解为NO和O,这与实验检测的结论相一致.     

GaSb纳米线的CVD可控制备及其光学表征

采用CVD法合成GaSb纳米线,并分析生长时间对其长度的影响,随后对其进行光学表征.实验过程中,分别采用喷金法和滴金法对硅片进行预处理,再置于相同条件下制备GaSb纳米线;之后对其进行表征分析,根据扫描电子显微镜（SEM）表征结果证实,两种方法制备的纳米线都满足VLS生长机制.且发现GaSb纳米线的生长长度,可以通过改变其生长时间来进行控制.通过该纳米线的透射电子显微镜图（TEM）、X射线衍射图（XRD）等结构表征,表明该纳米线为结晶品质优良的立方闪锌矿结构;同时,从GaSb纳米线的拉曼光谱（Raman）及光致发光谱（PL）可以反映该纳米线具有优良的光学性质.由此证明,采用CVD法制得的纳米线光学性质优异,且可以实现可控制备.     

硒化钨花状纳米晶的可控合成及电催化产氢性能研究

采用胶体化学法,以氧化钨(W18O49)为钨源制备出花状硒化钨纳米晶.采用透射电子显微镜(TEM)、高分辨透射电镜(HRTEM)和X射线衍射(XRD)手段对硒化钨纳米晶进行表征.本文对硒化钨花状纳米晶体的可控合成进行了初步探索,同时对烧结后的硒化钨纳米晶进行了电催化产氢测试.结果表明,硒化钨花状纳米晶具有良好的电催化性能.     

Two Titanium-oxo-Clusters with Malonate and Succinate Ligands: Single-Crystal Structures and Catalytic Property

Two alkane dicarboxylates substituted titanium-oxo-clusters, Ti₆O₃(OOCCH₂COO)₂(O ⁱ Pr)₁₄ (1) and Ti₆O₃(OOCC₂H₄COO)₂(O ⁱ Pr)₁₄ (2), were successfully prepared by one step in situ solvothermal synthesis. The compounds are the first examples of only flexible alkane dicarboxylate-substituted titanium-oxo-clusters. The structures of the compounds are best described as two trinuclear oxo-Ti₃ subunits linked by a μ ₂-O bridge and two malonate or succinate ligands, forming Ti₆ clusters. A photochromic effect was observed upon irradiating the crystals, and the color of the crystals was changed from transparent to gray. Photodegradation of the methyl orange in aqueous dispersions of microcrystals of compounds 1 and 2 were carried out under UV cut white light with the assistance of H₂O₂. Compound 2 exhibited higher photocatalytic activity than 1, which might be related to the smaller angles of μ ₂-O bridge in 2.     

Two New Cubane-Type Tetranuclear Compounds of Copper(II), Nickel(II) Derived from Reduced Schiff Base Ligand: Syntheses,Structures and Magnetic Properties

Two tetranuclear complexes, [M(H₃L)]₄·X (1, M = Cu, X = 4,4′-dpdo; 2, M = Ni, X = DMF, H₅L = 2-[(3,5-dibromo-2-hydroxybenzyl) amino]-2-(hydroxymethyl)propane-1,3-diol, 4,4′-dpdo is 4,4′-bipyridine-N,N′-dioxide, DMF = N,N′-dimethyl formamide), have been synthesized and characterized by elemental analysis, IR and X-ray single-crystal diffraction. Compound 1 features a centrosymmetric tetranuclear copper cluster which further constructed a 1D chain through a tetra-acceptor hydrogen bonds of 4,4′-dpdo molecule. Compound 2 having a P2₁ /n space group also exhibits a tetranuclear nickel cluster with a cubane topology in which the central Ni(II) ion and oxygen atoms from H₃L^2? occupy the alternate vertices of the cube. Magnetic properties of 1 and 2 in the 2–300 K have also been discussed. The tetranuclear cubanes cores display dominant ferromagnetic interactions.     

TurboFlow在线净化/液相色谱-串联质谱法快速测定动物源性食品中聚醚类抗生素的研究

建立了Turbo Flow在线净化/液相色谱-串联质谱法快速同时测定牛奶、鸡肉和鸡蛋中拉沙洛菌素、盐霉素、莫能菌素、甲基盐霉素、马杜霉素和尼日利亚菌素残留的方法。样品提取液经在线净化柱Cyclone-p净化,Thermo Scientific Hypersil-Gold C8(150 mm×2.1 mm,5μm)色谱柱分离,电喷雾正离子模式测定,整个分析过程仅13 min。方法在1~100μg/L范围内呈良好线性关系(r≥0.999),定量下限为1μg/kg,在动物源性食品中3个加标水平下的回收率为71.9%~109.0%,相对标准偏差为1.5%~14.9%。     

无色散p-约化KP系列的弦方程

无色散p-约化KP系列是无色散KP系列的约化形式.基于两个形式劳伦级数,由特殊的附加对称流,无色散p-约化KP系列的弦方程被给出.     

Cerium oxide nanoparticles protect primary mouse bone marrow stromal cells from apoptosis induced by oxidative stress

The sintering of a silver (Ag) nanoparticle film by laser beam irradiation was studied using a CW DPSS laser. The laser sintering of the Ag nanoparticle thin film gave a transparent conductive film with a thickness of ca. 10 nm, whereas a thin film sintered by conventional heat treatment using an electronic furnace was an insulator because of the formation of isolated silver grains during the slow heating process. The laser sintering of the Ag nanoparticle thin film gave a unique conductive network structure due to the rapid heating and quenching process caused by laser beam scanning. The influences of the laser sintering conditions such as laser scan speed on the conductivity and the transparency were studied. With the increase of scan speed from 0.50 to 5.00 mm/s, the surface resistivity remarkably decreased from 4.45 × 10⁸ to 6.30 Ω/sq. The addition of copper (Cu) nanoparticles to silver thin film was also studied to improve the homogeneity of the film and the conductivity due to the interaction between the oxidized surface of Cu nanoparticle and a glass substrate. By adding 5 wt% Cu nanoparticles to the Ag thin film, the surface resistivity improved to 2.40 Ω/sq.