笼形聚氨肟树脂的研究：碱处理对吸附性能的影响

研究碱处理的笼形聚氨肟树脂（ＢＣＡＯ）对二价金属离子的吸附行为。吸附结果若生成２：１配的，得Ｍｇ＾２＋，Ｃａ＾２＋，Ｂａ＾２＋，Ｍｎ＾２＋，Ｃｏ＾２＋，Ｎｉ＾２＋，Ｚｎ＾２＋，Ｃｄ＾２＋，Ｐｂ＾２＋，Ｃｕ＾２＋离子的吸附效率分别是２７．１、２９．２、３０．４、２９．０、２７．１、３０．８、４５．０、３９．８、６０．３、６２．１％，Ｈｇ＾２＋离子的吸附效率高达１０５％，表明在吸附过程中同时生成２：１     

希土取代苯基化合物的合成

1970年Hart等利用苯基锂的乙醚溶液与希土氯化物的四氢呋喃悬浮液反应,首次合成了希土苯基化合物(C_6H_5)_3Ln(Ln=Sc、Y),LiLn(C_6H_5)_4(Ln=La、Pr),但没有得到满意的碳氢分析数据,碳的实测值仅为计算值的三分之二左右。其他希土苯基化合物的合成也有报道。为了进一步探索希土芳基化合物的合成方法,希土和芳基之间成键的可能性,我们使用邻甲氧基苯基锂和对甲基苯基锂与希土氯化物反应,试图合成新的希土取代苯基化合物。     

超临界流体干燥过程的分析

以ZrOCl2•8H2O为原料，采用超临界流体干燥（SCFD）法，在短时间内制备出大孔体积高比表面ZrO2气凝胶超细粉．该法具有良好的稳定性和可靠性．建立了醇凝胶中液相含水量的分析方法，为产品质量控制及确认体系是否处于超临界状态提供了依据．对抽提后的溶剂分析表明，SCFD过程是一物理过程．对水的抽提干燥过程亦进行了初步的理论探讨．     

SMAI法制备的Cu催化剂的CO加氢催化

用溶剂化金属原子浸渍（SMAI）法制备了SiO2、Cr2O3负载Cu催化剂.XPS测定表明三种载体上的Cu几乎全部以零价态存在．X射线增宽法测定表明随着Cu含量增加Cu颗粒增大．Cu催化剂在CO加氢中的催化活性与载体、Cu颗粒大小和Cu价态有关．Cr2O3对Cu催化活性有促进效应．Cr2O3负载Cu催化剂活性随Cu颗粒减小而增大，而SiO2作载体时，颗粒大小对活性无影响，零价Cu0为催化活性中心     

Dynamic equilibrium of ion exchange in the system lead-cation exchanger at different temperatures

Summary The relationship between the ion-exchange reaction in a column and temperature was examined in the system lead-ion exchanger resin Lewatit S 1080. Lead binding was performed with 0.01 mol/l HNO₃ and elution with 4.0 mol/l HCl. The working temperature was gradually increased from 273 to 333 K. Thermostat columns were of own construction. The results were statistically analysed and graphically presented and the parameters obtained for elution curves were related to temperature. The elution curves were found to be temperature specific. The parameters such as elution band width, distribution factor, maximal volume of the eluate, maximal lead concentration in the eluate, confirmed this fact. At higher temperatures, larger volumes of elution solution were required for the elution of the same quantity of lead.

---

Ionenaustausch im System Blei-Kationischer Austauscher bei verschiedenen Temperaturen

     

Synthesis and characterization of aniline and aniline-o-sulfonic acid copolymers

The copolymer of aniline (An) and aniline-o-sulfonic acid (AS) is synthesized by chemical oxidation polymerization. The effects of mole ratio of copolymerized monomers on chain structure, thermostability, conductivity, redox properties of copolymer are discussed. It is indicated that if more AS monomers in polymerization system the corresponding structure units will increase, but their relation isn’t linear. When An:AS = 1:1, the ratio of structure unit in copolymer is 9:1, and it is only 1:2 for copolymer with An:AS = 1:6. The measurements of conductivity and redox activity also prove that the properties of An-co-AS(1:1), (1:3), and (1:4) are similar to polyaniline due to more An units than AS. When An:AS is higher than 1:6, it shows out the properties of copolymer is similar to those of poly(aniline-o-sulfonic acid), and their redox route is different. They will transform to follow the route of LH ↔ EH ↔ P. The results of thermo-analysis indicate that the decomposition temperature of AS units is lower than An units because of the electron-withdrawing group substitution. The decomposition temperature of polymer is related to dopant and doping degree. Electron-withdrawing group, -SO₃H, substitution and HCl doping will decrease polymer chain decomposition temperature. The mechanism of copolymerization of An and AS is different from homopolymerization. The monomer with low oxidation potential forms free radical cation firstly, which transfers to monomer with higher oxidation potential and initiates its polymerization.     

The effect of UV-irradiation on composting of polyethylene modified by cellulose

LDPE and its blend with cellulose, obtained by extrusion, were UV-irradiated with different doses or biodegraded in soil up to 1 year. Simultaneously, the same samples were 1 year biodegraded after 20 h UV pre-irradiation in the same conditions. The course of photo- and biodegradation was monitored by estimation of average molecular weights and polydispersity, gel amount, changes of PE crystallinity and mechanical properties. Moreover, the biodegradation degree was calculated on the basis of carbon dioxide evolved and surface morphological changes were observed by SEM. It was found that biodegradation of PE + cellulose is hampered by intermolecular crosslinking of both components. Although, the rate of decomposition of PE + cellulose blends is low it is enough for disintegration of such materials in the natural environment.     

Treatment of coke plant wastewater by A/O fixed biofilm system

The long-term environmental impacts of wastewa-ter from coke plant can be very high, especially due to the discharge of large amounts of wastewater. The composition of coke plant wastewater is complicated and varies from one factory to another, depending …     

Current mass spectrometry strategies for selenium speciation in dietary sources of high-selenium

This document reviews the most relevant mass spectrometry approaches to selenium (Se) speciation in high-Se food supplements in terms of qualitative and quantitative Se speciation and Se-containing species identification, with special reference to high-Se yeast, garlic, onions and Brazil nuts. Important topics such as complexity of Se speciation in these materials and the importance of combining Se-specific detection and molecule-specific determination of the particular species of this element in parallel with chromatography, to understand their nutritional role and cancer preventive properties are critically discussed throughout. The versatility and potential of mass spectrometric detection in this field are clearly demonstrated. Although great advances have been achieved, further developments are required, especially if speciatedcertified reference materials (CRMs) are to be produced for validation of measurements of target Se-containing species in Se-food supplements.     

Diagnosis of OH Radical by Optical Emission Spectroscopy in Atmospheric Pressure Unsaturated Humid Air Corona Discharge and its Implication to Desulphurization of Flue Gas

OH radical in the corona discharge with pipe–nozzle–plate electrode has been diagnosed by optical emission spectroscopy. Spatial variations of OH radical emission in discharge gap have been measured. Relative intensity of OH radical emission spectroscopy increases with increasing water vapor flux injected into the reactor or intensity of electric field supported. In positive pulsed corona discharge, relative intensity is higher than that in positive DC corona discharge and lower than that in negative DC corona discharge. Strongest intensity of OH radical spectrum appears within the range of 5 mm near the discharge nozzle- electrode. In addition, it is proved that the efficiency of desulphurization from flue gas by pulsed corona discharge plasma processes can be improved when OH radical is produced in the reactor.